|
| MICKYYYY |
|
||
|
Hey All,
I was just on jegs.com and was looking for some parts and came across a MSD kit to suit 5.0L. Now i was wondering if anyone has purchased these kits or used some of its components example distributor? and what difference it has made to your car. I just like to outline i do have a stroker 347, the link: http://www.jegs.com/webapp/wcs/stores/s ... 4_-1_76248
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| EBXR8380 |
|
|||
|
Can be bought at Rocket for well under $500.00...With just module...There's No need for rev limiter on efi engines...
I had one on my engine.. But with low comp and wide spark advance it couldn't stop csossover spark in dissy cap due to strong spark...But they are fine on n/a engines... I'll be fitting the Dis-4 which is required on wasted spark or distributor less ignitions...At present since removing MSD I have to run plug gap at .020 any bigger and spark gets blown out...Engine does run crisper with one fitted...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
Yeh i dont know much about them and looking for someone who has used them and what setup i should use and so on. So can i get that kit from rocket for less thatn what jegs sell it for?
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| EBXR8380 |
|
|||
|
The MSD6200 [MSD 6A] is all you need
with MSD 8874 TFI harness..... http://www.rocketindustries.com.au/desc ... no=MSD6200
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| mitchg911 |
|
|||
|
im running a msd6a, blaster2 coil and the msd tfi dizzy in mine..
i run the 6a and the coil purely because i had them, the dizzy was coz its a $1000 cheaper than a stock replacement. i wouldnt say it does anything for performance on a stock motor, but my plugs are still very clean after 20,000kms... -mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
Well it a performance and reliablity thing is my main aim as well as im gona respray my engine bay & make it look nice so its abit of a cosmetic look as well.
How about the distributors, are they any good? http://www.rocketindustries.com.au/desc ... no=MSD8455 http://www.rocketindustries.com.au/desc ... no=MSD8456
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| GTBob |
|
|||
|
Ran msd 7 and blaster coil on my HO never missed a beat and ran to 7000RPM +
_________________ Rotten Old Revhead!!! XW GTHO + EF ex cop car (exractors 2.5 cat back zorst !6" Simmons K&N +airbox mods Lowered with Bilstein shocks+Whiteline Bars NEXT THING Swap HO for GTP or Ferrari! |
|||
| Top | |
|||
| mitchg911 |
|
|||
|
i havent had any issues with my dizzy, but i know there is a couple of members on here that have.. touch wood mine will be ok..
-mitch
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
mitchg911 are you running all this gear on a 5.0L or something else?
I dont know which dissy u have, do u have a link 2 what it looks like and spec's?
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| mitchg911 |
|
|||
|
yeh its on a 5l,(el fairy)
im 99% sure its an msd8456, (may be a 55 tho ill have to find the receipt, im pretty sure theyre the same anyway) http://store.summitracing.com/partdetai ... toview=sku http://www.msdignition.com/dist_16.htm
_________________ BF XR6T 6spd Auto. 60lb injectors, Hybrid Cooler, Custom Piping, Custom Surge Tank, Actuator. |
|||
| Top | |
|||
| MICKYYYY |
|
||
|
Hey mitchg911,
The second link looks like its the exact same as my link in my first post???
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| MICKYYYY |
|
||
|
Anyone running other brands like crane?
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| MICKYYYY |
|
||
|
Anyone else have any comments or suggestions???
_________________ Wanted Either Capri/Cortina/XY/XW/XR/XT with tough V8 stroker engine, auto, 9inch, upgraded brakes etc[/SIZE][/size][/color] |
||
| Top | |
||
| Timmeh |
|
||
|
Draggin this thread abck to the surface.
I'm after a complete ignition system now for my EL XR8. MSD one. Need part numbers of bits or a kit that will suit me. My 5.0L has currently got this GT40P heads with larger valves AU 220kw CAM Port matched heads and Explorer Manifold. ELGT headers 3" exhaust. 58mm TB and stock MAF. What is it I need? |
||
| Top | |
||
| falcon gl |
|
||
|
bigger throttle and maf dont worry about spark just get a good coil and new cap rotor and leads
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 24 guests |
