I've got myself a little problem. I have a 65mm AU throttle body and a 80mm Cobra MAF with a 3 inch(76mm) stainless air intake tube. Now I have been able to join the intake pipe to the throttle body with silicone joiners no worries but haven't been able to find a joiner big enough to fit around my MAF (which measures nearly 90mm on the outside) Any ideas on how I can get around this or is there anyone out there that has an 80mm or larger MAF and has a solution.

Cheers, Kris.

i think autobarn have got a few different reducers at northland ,just brought a 90mm to 75mm

ah i see, yer i tried autobarn in melton which is where I'm from but they got stuff all.

[quote="ELXR6lookalike"]ah i see, yer i tried autobarn in melton which is where I'm from but they got stuff all.[/quote]

try a truck spares, they will have something. unfortunitly there parts are designed for 1000s of hours use and may cost a bit more than usual but they usually have 3' gear and bigger.

Yer i already tried the truck parts idea (old man is a driver). there are alot of things that nearly fit but not quite. I've ordered a reducer silicon hose from a rubber specialist down here so hopefully it will do the trick.