|
| Matt_jew |
|
||
|
Hi all
Need some advice as I have had many a conflicting opinion. Have a set of 5.0 AU extractors here from a series 3. Will they fit in the engine bay of a NF lane? Not worried aboutthe plug angle as hopefully soon enough the heads will be getting changed. Have been told they will fit ok and have also been told they will hit the steering............ Can anyone say for sure if they are a yay or nay? Matt
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| millard455 |
|
|||
|
pretty sure that AU extractors WONT fit in an E series due to fouling on the steering.
most people swap the E7 heads for GT40P heads and use the E series extractors and thats where the tight plug angle comes into it.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| XR9UTE |
|
||
|
No they won't fit.
|
||
| Top | |
||
| millard455 |
|
|||
|
there you go.
if XR9UTE says they dont fit, give it no more thaught. you said you might be changing heads soon, you will run into this conflicting problem again if you use GT40P heads. stick with E SERIES extractors, they WILL fit just has a tight plug angle. people like PACEMAKER will tell you they dont fit but they do.
_________________ EL XR8 SERIES 2, 5SPD, HOT CHILLI RED, 200 ODD RWKW OF V8 FUN AND GAMES |
|||
| Top | |
|||
| Matt_jew |
|
||
|
Major bummer.
Looks like I will have to try and off load the ones I bought.................... Cheers for the info.
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 22 guests |
