Fordmods Logo

C4 into EL 5.0 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: C4 into EL 5.0
Posted: Fri Dec 23, 2005 1:35 pm 
Oompa Loompa
Offline
User avatar

Age: 46

Posts: 26

Joined: 20th Oct 2005

Ride: AU Tickford Fairmont

Location: Perth
WA, Australia

I've had enough of the gearbox problems and have decided to put a C$ into my EL. Any advice on how to go about it? Do I need to chip the ECU to remove the electronic POS box or not? Also what are the best quick easy and relatively cheap performance mods for the 5.0?
Top
 Profile  
 
 
Posted: Fri Dec 23, 2005 1:37 pm 
Getting Side Ways
Offline

Posts: 6911

Joined: 6th Nov 2004

Gallery: 4 images

Ride: BF XR6, BF XT Wagon

Power: 197 rwkw

Location: Perth
WA, Australia

5.0 mods that are cheap would be full exhaust system. Although can be over $2000 it gives the most kw for $$ value.
Then next would be a cam.
After that do MAF, TB and heads.
Set of underdrive pulleys wouldnt go astray either.

 

_________________

EL XR8
Timmeh banned himself from being a moderator.

Top
 Profile  
 
 
Posted: Fri Dec 23, 2005 1:39 pm 
Oompa Loompa
Offline
User avatar

Age: 46

Posts: 26

Joined: 20th Oct 2005

Ride: AU Tickford Fairmont

Location: Perth
WA, Australia

thanks. Already got the exhaust but want a bit more sting
Top
 Profile  
 
 
Posted: Fri Dec 23, 2005 3:47 pm 
EFI Guru
Offline

Age: 58

Posts: 4351

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

Simon from Allfast torque converters can help you with the C4 install.
However, the fact that you've hardly done anything to your engine means that you may as well stick with your BTR auto. If you are having problems with yours and it's been rebuilt it's time to change gearbox builders. Simon also has the contact details of a BTR trans specialist.

Pete.
Top
 Profile  
 
 
Posted: Fri Dec 23, 2005 3:53 pm 
Getting Side Ways
Offline

Age: 42

Posts: 7287

Joined: 5th Nov 2004

Gallery: 12 images

Ride: 1994 ED XR8 Sprint

Location: Somewhere in
QLD, Australia

bah, fix the problem once and for all...... chuck a manual in it!

 

_________________

Banned

Top
 Profile  
 
 
Posted: Fri Dec 23, 2005 7:11 pm 
Getting Side Ways
Offline

Posts: 6911

Joined: 6th Nov 2004

Gallery: 4 images

Ride: BF XR6, BF XT Wagon

Power: 197 rwkw

Location: Perth
WA, Australia

Interceptor wrote:
bah, fix the problem once and for all...... chuck a manual in it!


I'll second that.

 

_________________

EL XR8
Timmeh banned himself from being a moderator.

Top
 Profile  
 
 
Posted: Fri Dec 23, 2005 8:31 pm 
Getting Side Ways
Offline
User avatar

Age: 45

Posts: 1440

Joined: 7th Nov 2004

Ride: 320kw BA XR8

Location: Adelaide
SA, Australia

Waiting for the "throw a manual in it" crowd, seems there cannot be an auto related thread without them lol, but if you have no plans for major engine mods I guess that is an option (although V8 5 speeds are sometimes hard to find).

The BTR box will hold up to a huge amount of punishment if fitted with a decent cooler. It is also a good idea to get an adjustable S5 solenoid or even an electronic shift kit as that also cuts down on trans temp. Going back to a 3 speed with no overdrive is obviosuly going to have a big effect on fuel economy, not to mention make the car difficult to sell later on (unless you put the 4 speed back in).
Top
 Profile  
 
 
Posted: Sat Dec 24, 2005 6:52 pm 
Stock as a Rock
Offline

Age: 40

Posts: 132

Joined: 5th Nov 2004

Ride: EF Fairmont 5.0

Location: Adelaide, SA
SA, Australia

^^Exactly what he said^^

As for mods, there isn't much you can do to them cheaply for extra power like the I6's. Extractors if you don't have some make a good difference. MAF/TB will make bit of power, maybe 5 rwkw, but nothing special, the manifold and heads are the biggest restrictions.

Underdrive pullies will free up some power, but a few people with the BPT kits fitted have had charging and cooling troubles. US kits will not fit the aussie water pump without some machining.
Top
 Profile  
 
 
 Post subject: Re: C4 into EL 5.0
Posted: Sun Dec 25, 2005 2:20 pm 
Getting Side Ways
Offline

Posts: 1661

Joined: 22nd Jun 2005

Location: Melbourne
VIC, Australia

2202 wrote:
I've had enough of the gearbox problems and have decided to put a C$ into my EL. Any advice on how to go about it? Do I need to chip the ECU to remove the electronic POS box or not? Also what are the best quick easy and relatively cheap performance mods for the 5.0?


hi


try Brett4777 his a forum member very cluey with BRT transmissions

even tho the distance u 2 are apart wont matter im sure u could come to some agreement on frieght

He builds the BTR 4speeds to XR6Turbo spec and can supply u with addition strenght and reliability and performance also in mind

PM brett4777 and see what he can offer u

cheers

merry christmas and happy new year 2006

 

_________________

WANTED - Complete BTr4 and zf 6hp26 automatic transmission 6 cylinder and V8 transmission(s) suit rebuild? Drop me a PM if you can help would be greatly appreciated - thanks

Top
 Profile  
 
 
Posted: Sun Dec 25, 2005 9:05 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 4946

Joined: 15th Nov 2004

Gallery: 2 images

Ride: Trik'd up EFII XR6

Location: Perth
WA, Australia

yeah ivan we get it lol nah just kidding but yeah guys bretts knows a good deal bout this sorta mod so flick him a pm

 

_________________

For Sale: 25 Farad Rockford Fosgate Competition Series Carbon Cap, more to come - pm me if interested

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: No registered users and 23 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Mar 28, 2024 9:44 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names