|
| green car |
|
||
|
Building a 351 windsor with a 302 windsor cam and having probs with ignition timing.The dizzy was pulled out before i got there and noones sure where number 1 is on the dizzy.If a fuel injected 302 has the same firing order as a carbied 302 that would mean that no 1 is at the direct back of the dizzy like my 5.0 in my eb. can anyone confirm this?We are running 302 windsor firing order to suit the cam.
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| green car |
|
||
|
my post is a bit confusing so this is my question,is carby 302w firing order the same as fuel inj 302w?
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| EBXR8380 |
|
|||
|
The non roller or carb fireing order is different
carb 302's are 1-5-4-2-6-3-7-8)
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| XR9UTE |
|
||
|
Number 1 is in the same place on either engine. Where it is depends on where you install the dizzy...that's all. You just have to find TDC on #1.
Stick your finger in plug hole 1 and turn the engine over by hand until the compression blows your finger out of the hole. you should be coming up on TDC for cyl 1. Set your dizzy up with the rotor pointing at the #1 post and you'll be close. Pete. |
||
| Top | |
||
| green car |
|
||
|
thanks for your help guys, much appreciated.Shes all go now but the cooling system needs work.Thanx again
_________________ 165 Killer Wasps all packaged in a green kmart car, almost an explorer in a way... |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
