|
| kenny |
|
|||
|
TerroristGHIA wrote: You guys both have a good knowledge of the 302. I am very impressed with the results of both vehicles from Kenny and EDXR8. On a side note, does anyone know if the Edelbrock Victor Junoir EFI lower will bolt up to the RPMII upper. Reason i ask is this is the injection system i will be running on the new motor
Brett hey Brett, do you still have that manifold ? if so whats ur asking price, got a set of yates heads for the beast and wanna see its potential. kenny
_________________
|
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
Yes i still have it, but will only sell it if the Victor Jr EFI Lower doesnt fit. If i let it go, it will be for $1200 plus shipping, but will deliver to sydney. Anyway does the Victor Jr EFI fit. This is the manifold i need for the new motor
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| greg302 |
|
||
|
kenny wrote: greg302 wrote: whats wrong wit the e 303 cam?? NO COMMENT! can somone comment on this cam? without just saying its crap thanks
_________________ 347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse |
||
| Top | |
||
| EBXR8380 |
|
|||
|
X 303 will be o/k with that induction set up...
Where high flowing parts are mixed with bassic parts they don't work too well... You'll need good maf and 30 Lb injectors ...Imo... You'll deffinatley know there's a cam in there!!! They are after all SVO racing cams...
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| -clampy- |
|
||
|
TerroristGHIA wrote: You guys both have a good knowledge of the 302. I am very impressed with the results of both vehicles from Kenny and EDXR8. On a side note, does anyone know if the Edelbrock Victor Junoir EFI lower will bolt up to the RPMII upper. Reason i ask is this is the injection system i will be running on the new motor
Brett short answer NO it wont. the rpm II has its own lower that is unique to the rpm II. are you going to let the rpm2 go for 1200? i can buy it new here in WA for less than that..
_________________ current ride: worn out chuck taylors |
||
| Top | |
||
| EBXR8380 |
|
|||
|
What block are you planing on fitting roller gear ?
_________________ As in ZOOM 126 edition |
|||
| Top | |
|||
| greg302 |
|
||
|
e 303 anyone?
_________________ 347, crane cam, Pro topline 180 heads, Edelbrock victor efi intake, 80mm C&L maf, 75mm tb, 30lb injectors and 1/4 horse |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 21 guests |
