|
| memnoch |
|
||
|
what are the standard lbs for a el 5.0
_________________ 232.5 RW KILLER WASPS |
||
| Top | |
||
| MrLandau |
|
|||
|
The orange and grey injectors on the EB-EL V8 are 19lb/hr @ 38psi.
Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| memnoch |
|
||
|
MrLandau wrote: The orange and grey injectors on the EB-EL V8 are 19lb/hr @ 38psi.
Shane how much are the 24lb on your web page worth shane
_________________ 232.5 RW KILLER WASPS |
||
| Top | |
||
| MrLandau |
|
|||
|
$550 or $525 if you buy the mass airflow meter at the same time. I have a few in stock too.
Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| memnoch |
|
||
|
MrLandau wrote: $550 or $525 if you buy the mass airflow meter at the same time. I have a few in stock too.
Shane and one more ? shane do you sell underdrive pulleys for AU 4.0, if so how much do they go for
_________________ 232.5 RW KILLER WASPS |
||
| Top | |
||
| memnoch |
|
||
|
MrLandau wrote: $550 or $525 if you buy the mass airflow meter at the same time. I have a few in stock too.
Shane do i need to change the airflow meter as well
_________________ 232.5 RW KILLER WASPS |
||
| Top | |
||
| MrLandau |
|
|||
|
The I6 Falcons and AU V8's(Explorer) use a bottom pulley that intergrates the harmonic ballancer. When you think an aftermarket harmonic ballancer is $250 and the other pulleys involved - it would not be a cheap unit. I was told by one company that a minimum 1000 units would be needed.
Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| MrLandau |
|
|||
|
memnoch wrote: MrLandau wrote: $550 or $525 if you buy the mass airflow meter at the same time. I have a few in stock too. Shane do i need to change the airflow meter as well If you change injector size with a V8 - you need a mass airflow meter which is calibrated to suit the new injectors. The meters start at $380 (70mm unit) and go through to over $1k for a 117mm beast. You Maf needs to be 5-10mm above the size of your throttlebody. Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| memnoch |
|
||
|
thanx for that shane, bit over my price range, but i think thats what i'll do next
_________________ 232.5 RW KILLER WASPS |
||
| Top | |
||
| MrLandau |
|
|||
|
Seriously - stick the Ford racing underdrives in next - best bang for buck and gaurenteed to make power. Believe it or not - it will also give you better fuel economy (if you drive it exactly the same as before install).
Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| memnoch |
|
||
|
howmuch do the ford racing underdrive pulleys cost
_________________ 232.5 RW KILLER WASPS |
||
| Top | |
||
| MrLandau |
|
|||
|
The Ford Racing underdrive pulley kits are $275 + $20 P&H.
Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| memnoch |
|
||
|
MrLandau wrote: The Ford Racing underdrive pulley kits are $275 + $20 P&H.
Shane what pulleys do i get with that kit,, shane
_________________ 232.5 RW KILLER WASPS |
||
| Top | |
||
| MrLandau |
|
|||
|
With the Ford Racing products kit you get the crankshaft, waterpump and alternator pulleys.
Shane
_________________ Weapons of choice |
|||
| Top | |
|||
| Waggin |
|
|||
|
what do you do about the PS pulley to pretty it up to match?
_________________ WAG363: AUII LTD Supercharged 363 Dart Stroker [Supercharged 363 LTD Build] |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 10 guests |
