Fordmods Logo

Is this ebay item right for me? 

 

Page 1 of 1 [ 10 posts ] 

 
 Post subject: Is this ebay item right for me?
Posted: Thu Jun 09, 2005 3:06 pm 
Parts Gopher
Offline

Age: 36

Posts: 56

Joined: 17th Mar 2005

Ride: XR8

Location: Adelaide
SA, Australia

Hey,

I've been offered this just wondering if it will work on my ed xr8 or not?

http://cgi.ebay.com/ebaymotors/ws/eBayI ... Track=true

It is a bit vague but the pro-m has the oval plug, and the injectors are fms.... and i sent the guy a msg and he said it was off of a 87-93 mustang

cheers
Simon
Top
 Profile  
 
 
Posted: Thu Jun 09, 2005 3:35 pm 
Getting Side Ways
Offline
User avatar

Age: 36

Posts: 8655

Joined: 5th Nov 2004

Gallery: 37 images

Ride: V8 EF Futura

Location: Adelaide CBD
SA, Australia

Hey simon,

Long time no see!!

If the injectors have EV1 style plugs they are plug and play... im pretty sure the Pro-M will do the trick... any chance of getting more info on the MAF? It looks as tho the E series electronics will fit... this will be the key.

87-93 Mustang is what our EFI systems are based on, so it sounds like all should be OK.

 

_________________

I promise..... I will never die.

Fordmods Administration Group MINOR PUNKED

Top
 Profile  
 
 
Posted: Thu Jun 09, 2005 4:28 pm 
EFI Guru
Offline

Age: 52

Posts: 4289

Joined: 5th Nov 2004

Gallery: 28 images

Ride: 351 Vogue,XH 5.0,'17 5.0 Stang

Location: Perth
WA, Australia

Yes it will work but, do you need 36lb injectors?

Pete.
Top
 Profile  
 
 
Posted: Thu Jun 09, 2005 4:47 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 1440

Joined: 7th Nov 2004

Ride: 320kw BA XR8

Location: Adelaide
SA, Australia

36ers are a bit severe unless you are running a blower. Also without something like a tweecer you will probably have very rich startup issues. With my 42lb injectors the engine would flood every time until I reduced the injector pulsewidth during cranking with the tweecer.
Top
 Profile  
 
 
Posted: Thu Jun 09, 2005 4:59 pm 
Parts Gopher
Offline

Age: 36

Posts: 56

Joined: 17th Mar 2005

Ride: XR8

Location: Adelaide
SA, Australia

Yeah i don't really need 36er's but i am going to run NOS so i thought it could be a safety measure...? don't wanna lean out

I'm having the rich startup issues now with my s**t, so i'm thinking of going to a tweecer anyway...it's hard though because there aren't many people using tweecer in SA...
Top
 Profile  
 
 
Posted: Thu Jun 09, 2005 5:05 pm 
Getting Side Ways
Offline
User avatar

Age: 38

Posts: 1440

Joined: 7th Nov 2004

Ride: 320kw BA XR8

Location: Adelaide
SA, Australia

You are welcome to come around and see how my tweecer is working. My car will be off the road again probably for the next few weeks but you can still have a play with the software etc or just wait till its going again.

As you are probably aware, it has far more ability than the unichip if you have the right EEC or can find one.
Top
 Profile  
 
 
Posted: Thu Jun 09, 2005 5:45 pm 
Getting Side Ways
Offline
User avatar

Age: 46

Posts: 3763

Joined: 25th Nov 2004

Gallery: 6 images

Ride: EFII 5.8 NOS TerroristGhia

Power: 274 rwkw

Location: Sydney Australia
NSW, Australia

Dude 24's are fine with NOS. I know, cause thats what i run on mine
Brett

 

_________________

The Terrorist ED Retired due to RUST.
The TerrosistGhia, EF Ghia 351 EFI 5 Speed.
Millennium Falcon, Sleeper EL DOHC 6 Speed Manual EFI LPG
Member#1131
I didn't Vote for Multiculturalism, DID YOU!!!

Top
 Profile  
 
 
Posted: Thu Jun 09, 2005 10:54 pm 
Getting Side Ways
Offline
User avatar

Age: 64

Posts: 3552

Joined: 7th Nov 2004

Gallery: 4 images

Power: 482 rwkw

Location: Penrith
NSW, Australia

That maf comes with its own electronics...
It" should" be trimed or tuned to run with 36 Lb injectors...
Idle could be an issue ?? Keep in mind though, even with blower or turbo there is very little boost at idle anyway...
With N20 you need HEAPS of fuel.....
You have to use 36 Lb injectors with that maf ...Oh unless you tune with TEECer etc....

 

_________________

As in ZOOM 126 edition
331 Dart block,3.25/ 4340 steel crank, Oliver rods,TFS ported track heat heads, TFS track heat inlet Twin SC61 turbo's
Project 1UZ-EF has started.. S475 Turbo 4.0 V8 Mustang Celica.....

Top
 Profile  
 
 
Posted: Sat Jun 11, 2005 4:52 am 
Parts Gopher
Offline

Age: 36

Posts: 56

Joined: 17th Mar 2005

Ride: XR8

Location: Adelaide
SA, Australia

EDXR8 wrote:
You are welcome to come around and see how my tweecer is working. My car will be off the road again probably for the next few weeks but you can still have a play with the software etc or just wait till its going again.

As you are probably aware, it has far more ability than the unichip if you have the right EEC or can find one.


Thanks dude ill take you up on that offer i'll pm you
Top
 Profile  
 
 
Posted: Sat Jun 11, 2005 4:55 am 
Parts Gopher
Offline

Age: 36

Posts: 56

Joined: 17th Mar 2005

Ride: XR8

Location: Adelaide
SA, Australia

I have bought it, got the injectors and MAF for 295 shipped...

i'll let you all know how it goes!
Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 10 posts ] 

Who is online

Users browsing this forum: Google [Bot] and 11 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sun Dec 17, 2017 4:37 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names