|
| XFWAGON |
|
|||
|
Hi guys, a while ago i did the conversion from crappy E series TB to AU 65mm TB, goes great but i always felt it could do MORE.
Well today, i found out why. I was looking at the throttle body and the throttle cable, when the throttle cable is pushed as far back as possible, it only opens the TB about 3/4 open, which is good i suppose, now to the best part, with my foot flat on the accelerator pedal, as far as it will go, it only opens the TB about 1/4 way, if that. Whats the go here? How did the guys that did the swap get on with this problem? Cheers.
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| blueblood |
|
|||
|
Didn't have this problem....I hope! Gonna have to check that! I did put two extra nuts, as spacers, between the manifold and the bracket that holds the cable up to the T/B, to put the ball clip in the right spot.
_________________ 93 EB S-XR8 5 SPEED, |
|||
| Top | |
|||
| XFWAGON |
|
|||
|
blueblood wrote: Didn't have this problem....I hope! Gonna have to check that! I did put two extra nuts, as spacers, between the manifold and the bracket that holds the cable up to the T/B, to put the ball clip in the right spot. Yeah that's what i just did, although the secondary cable was making the butterfly stay open slightly so i just d/c that lol, didn't appear to do anything so i took it off. although, it's still not giving me full throttle.
_________________ 1993 LTD V8 Oregon 5 speed "click me" |
|||
| Top | |
|||
| blueblood |
|
|||
|
That secondary cable is the cruise isnt it?
_________________ 93 EB S-XR8 5 SPEED, |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 17 guests |
