Fordmods Logo

3Spd Column Shift Manual Bolt to EF 6 cylinder. 

 

Page 1 of 1 [ 8 posts ] 

 
 Post subject: 3Spd Column Shift Manual Bolt to EF 6 cylinder.
Posted: Mon Jul 12, 2010 9:26 pm 
Parts Gopher
Offline

Age: 29

Posts: 69

Joined: 14th Nov 2009

Ride: EL Falcon / XG Panelvan

hey guys just wondering if an XF 3spd manual column shift will bolt to ea to el 6 cylinder,
Top
 Profile  
 
 
 Post subject: Re: 3Spd Column Shift Manual Bolt to EF 6 cylinder.
Posted: Mon Jul 12, 2010 11:55 pm 
Oompa Loompa
Offline
User avatar

Age: 53

Posts: 38

Joined: 11th Jul 2010

Ride: ford ed xr6

Location: marsden
QLD, Australia

no box will not just bolt straight up as starter motor is on wrong side . not sure though if you can get a 5speed bell housing from an e series n redrill the box to bell housing bolt patern
Top
 Profile  
 
 
 Post subject: Re: 3Spd Column Shift Manual Bolt to EF 6 cylinder.
Posted: Tue Jul 13, 2010 12:04 am 
Getting Side Ways
Offline

Age: 27

Posts: 747

Joined: 8th Nov 2009

Ride: ford au

Location: brisbane
QLD, Australia

why bother when u can get a 5sp instead for chips for a eseries

 

_________________

Daily Driver, Series 1 Au Forte

Quote:
Posted by Xcabbi, Does it slap or rattle? Rattle is more to do with timing chains and tensioners. Slap is more to do with lifters, rings, bearings or GENIII boat anchors

Top
 Profile  
 
 
 Post subject: Re: 3Spd Column Shift Manual Bolt to EF 6 cylinder.
Posted: Tue Jul 13, 2010 7:20 am 
Parts Gopher
Offline

Age: 29

Posts: 69

Joined: 14th Nov 2009

Ride: EL Falcon / XG Panelvan

because i like the room i have with the column shift, nevermind, thanks guys
Top
 Profile  
 
 
 Post subject: Re: 3Spd Column Shift Manual Bolt to EF 6 cylinder.
Posted: Tue Jul 13, 2010 9:08 am 
Getting Side Ways
Offline
User avatar

Age: 27

Posts: 1998

Joined: 31st Dec 2007

Gallery: 9 images

Ride: xc wag's, tnklane wag's

Location: Munruben
QLD, Australia

hunt down a taxi(well any model with benchseat. lot of xh's had it), you could get the 4 spd column on them, although, I think bellhousing, handbrake, column shrouds linkages. not the easiest to do but can be done.

oh you want manual, I think you'll have a bit of trouble, as mentioned bellhouseing. etc.

they only ever did column e serie in auto.
be a fair bit f custom work to pull it off.

 

_________________

Signature removed by moderator.signature must not exceed 120x500 pixles

Top
 Profile  
 
 
 Post subject: Re: 3Spd Column Shift Manual Bolt to EF 6 cylinder.
Posted: Tue Jul 13, 2010 12:25 pm 
Getting Side Ways
Offline
User avatar

Age: 45

Posts: 863

Joined: 26th Nov 2007

Gallery: 20 images

Ride: XH Ute / AU3 V8 Wagon

Location: Bris-Vegas
QLD, Australia

Go to http://www.rodshop.com.au/trans_conversions/2wd_trans.htm and scroll down the page to BH091A. That will solve the problem for you.
Good luck. 8-)

 

_________________

Yes, I own a Ute. No, I won't help you move!

EL Wagon Build Thread http://www.fordmods.com/the-garage-f53/sooty72-s-ef-futura-wagon-long-term-project-t90025.html
XH Ute Thread http://www.fordmods.com/post1138970.html#p1138970

Top
 Profile  
 
 
 Post subject: Re: 3Spd Column Shift Manual Bolt to EF 6 cylinder.
Posted: Tue Jul 13, 2010 9:36 pm 
Getting Side Ways
Offline
User avatar

Age: 49

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

The 3sp spigot is smaller than the 5sp spigot too, as well as the spline is smaller, too.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
 Post subject: Re: 3Spd Column Shift Manual Bolt to EF 6 cylinder.
Posted: Tue Jul 13, 2010 10:20 pm 
Smokin em up
Offline

Age: 64

Posts: 224

Joined: 31st May 2010

Gallery: 3 images

Ride: XF 5 LIT P/ VAN EF 5 LIT FUTURA

Location: melbourne
VIC, Australia

The guys from G.B Race cars made there own for a BA with 3 speed speedway car. But a T5 one should be able to be adapted & if u use an EA flywheel you should be able to get a clutch & pressure plate to fit. Regards TPVM.

 

_________________

SALT IS FOR RACING ON. SAUCE IS FOR FISH & CHIPS.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 8 posts ] 

Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Mon Dec 18, 2017 8:26 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names