Fordmods Logo

cooling xy 351 

 

Page 1 of 2 [ 17 posts ] Go to page 1, 2  Next

 
 Post subject: cooling xy 351
Posted: Sun Aug 23, 2009 6:08 pm 
Fordmods Newbie
Offline

Age: 70

Posts: 2

Joined: 23rd Aug 2009

Ride: xy falcon

Location: cairns
QLD, Australia

hi i have a xy 351 with a fg thermo fan coupled to a 60mm vs alloy radiator 160 thermostat runs well but when it is stoked a little the temp starts to climb sits around 200 what more could i do to cool it down a little thanks dave
Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Sun Aug 23, 2009 7:36 pm 
Getting Side Ways
Offline

Age: 28

Posts: 3344

Joined: 19th Dec 2008

Gallery: 1 images

Ride: el fairmont ghia

Location: Farleigh
QLD, Australia

probly not our tractor goes to 210 celseus

 

_________________

Muts EL Fairmont Ghia
Image
did someone call 9 1 HOLY s**t?

Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Sun Aug 23, 2009 8:26 pm 
Getting Side Ways
Offline

Age: 28

Posts: 3344

Joined: 19th Dec 2008

Gallery: 1 images

Ride: el fairmont ghia

Location: Farleigh
QLD, Australia

how old is ur motor though ash?

 

_________________

Muts EL Fairmont Ghia
Image
did someone call 9 1 HOLY s**t?

Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Sun Aug 23, 2009 8:49 pm 
Getting Side Ways
Offline

Age: 47

Posts: 4604

Joined: 23rd Nov 2006

Gallery: 4 images

Ride: 5.0 AU's and 5.0 Maverick

Power: 139 rwkw

Location: Sydney West
NSW, Australia

mitchell g wrote:
probly not our tractor goes to 210 celseus



Cant be mate. No motor will run at 200 celcius. Thats cooking piston territory.
Water under pressure in a cooling system will still boil at around 130 degrees.

 

_________________

xr6turnip wrote:
More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around!

Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Sun Aug 23, 2009 8:50 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

I came across this before. Tried 3 different brand water pumps, ( 2 cast iron, 1 alloy ), to no avail, even had a 4 core Aussie Desert cooler radiator.
I checked the clearence of the impellor to the pump housing, pressed it so it was closer ( about 0.020" ), then made a round plate out of 1.0mm stainless steel, drilled holes in it at the right places, puddle welded it to the impellor fins, checked clearence to timing chain cover.
Fitted the pump, whala, fixed.
I had made the pump more positive in its displacement of the water.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Sun Aug 23, 2009 9:14 pm 
Getting Side Ways
Offline
User avatar

Age: 55

Posts: 1629

Joined: 8th Jul 2007

Gallery: 21 images

Ride: EL F100 CAPRI XR EF

Power: 234 rwkw

Location: brighton
SA, Australia

my 351 cleveland in the xr runs just under 240 degrees farenheight on a warm day in traffic. i have a 3 core xb gt crossflow radiator and single 16" thermofan and a 15 pound radiator cap. motor has 320 rwhp and has done 7000 miles so far.
Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Sun Aug 23, 2009 10:01 pm 
Getting Side Ways
Offline

Age: 28

Posts: 3344

Joined: 19th Dec 2008

Gallery: 1 images

Ride: el fairmont ghia

Location: Farleigh
QLD, Australia

EVL098 wrote:
mitchell g wrote:
probly not our tractor goes to 210 celseus



Cant be mate. No motor will run at 200 celcius. Thats cooking piston territory.
Water under pressure in a cooling system will still boil at around 130 degrees.

it is an old frodson dexta mayby it dose run on farenhigh its anout 50 years old thow

 

_________________

Muts EL Fairmont Ghia
Image
did someone call 9 1 HOLY s**t?

Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Mon Aug 24, 2009 9:49 am 
Getting Side Ways
Offline

Age: 50

Posts: 469

Joined: 4th Jun 2006

Gallery: 35 images

Ride: xy fairmont

Location: Perth
WA, Australia

are you running a good quality coolent in it ??? and what do you call stoked a little......

 

_________________

If you have it under control then you dont have enough power..
There is no replacement for Displacment..

Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Tue Aug 25, 2009 9:58 pm 
Fordmods Newbie
Offline

Age: 70

Posts: 2

Joined: 23rd Aug 2009

Ride: xy falcon

Location: cairns
QLD, Australia

HI YES IT IS 200F GOOD COOLANT STOKE IT MEANS REV IT TO ABOUT 6500 IN ALL GEARS OUT ON THE OPEN ROAD TAKES A LONG TIME TO DROP BACK TO 180F THANKS VERY MUCH FOR YOUR REPLIES DAVE
Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Thu Aug 27, 2009 12:45 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

elf100capri wrote:
my 351 cleveland in the xr runs just under 240 degrees farenheight on a warm day in traffic. i have a 3 core xb gt crossflow radiator and single 16" thermofan and a 15 pound radiator cap. motor has 320 rwhp and has done 7000 miles so far.


212f is 100C....boiling point of pure water at sea level.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Thu Aug 27, 2009 5:12 pm 
Getting Side Ways
Offline
User avatar

Age: 55

Posts: 1629

Joined: 8th Jul 2007

Gallery: 21 images

Ride: EL F100 CAPRI XR EF

Power: 234 rwkw

Location: brighton
SA, Australia

cjh wrote:
elf100capri wrote:
my 351 cleveland in the xr runs just under 240 degrees farenheight on a warm day in traffic. i have a 3 core xb gt crossflow radiator and single 16" thermofan and a 15 pound radiator cap. motor has 320 rwhp and has done 7000 miles so far.


212f is 100C....boiling point of pure water at sea level.



correct cjh but that is not under pressure either, im running a higher pressure radiator cap which helps too. raising the pressure also raises the boiling point of water.
i got the idea from nascar racing and also was used in touring cars and supercars too until they worked out more efficient ways of cooling , some of them were running 18 and 20 pound radiator caps
ill get a video of it later in the year when it warms up if u want . ive felt the top hose at this temp and there is no bubbling/boiling. i realise its not good to run at this temp all the time but my xr in traffic does get hot. it was built 12 years ago and is still going stong, never had to top the water up.
Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Thu Aug 27, 2009 6:43 pm 
Getting Side Ways
Offline
User avatar

Age: 56

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

elf100capri wrote:
cjh wrote:
elf100capri wrote:
my 351 cleveland in the xr runs just under 240 degrees farenheight on a warm day in traffic. i have a 3 core xb gt crossflow radiator and single 16" thermofan and a 15 pound radiator cap. motor has 320 rwhp and has done 7000 miles so far.


212f is 100C....boiling point of pure water at sea level.



correct cjh but that is not under pressure either, im running a higher pressure radiator cap which helps too. raising the pressure also raises the boiling point of water.
i got the idea from nascar racing and also was used in touring cars and supercars too until they worked out more efficient ways of cooling , some of them were running 18 and 20 pound radiator caps
ill get a video of it later in the year when it warms up if u want . ive felt the top hose at this temp and there is no bubbling/boiling. i realise its not good to run at this temp all the time but my xr in traffic does get hot. it was built 12 years ago and is still going stong, never had to top the water up.


Well...just to be picky...the water is under 1 atmosphere of pressure..without a lid to capture the steam.
Have you ever measured the temp of the engine oil???
An EF 6cyl runs a 120kpa cap and V6 Commo's run a 135kpa cap.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Sat Aug 29, 2009 12:44 am 
Smokin em up
Offline

Posts: 270

Joined: 1st Sep 2007

Location: melbourne
VIC, Australia

Mate
do u use a adjustable thermo fan switch if not get one and set it to come on at 80 celsuis

gassa

 

_________________

When the clutch drops the bull s**t stops!!!!!

Top
 Profile  
 
 
 Post subject: Re: cooling xy 351
Posted: Fri Sep 04, 2009 11:58 pm 
Getting Side Ways
Offline

Posts: 791

Joined: 18th Mar 2005

Gallery: 4 images

Location: Adelaide
SA, Australia

Another thing to look at is air in and out of your radiator - how well is it sealed to the metal around it? gaps will give you less efficient cooling, same goes for a shroud if you can fit one - Also, a small `spoiler' directly under the radiator can help air recycling under the rad - have a look at how VL commodes are set up, with two small spoilers, one under rad, one a bit in front of it - actually works quite well.

 

_________________

351 4V XB Coupe running LPG

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 2  [ 17 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Thu Apr 18, 2024 11:29 pm All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names