|
| phatba |
|
||
|
papa smurf, is there any pedal pads available for the fg series, like they had in the ba/bf range? by pedal pads i mean the steel look covers that go over your accelarator and brake pedals, usually found in the fpv's. if they are available are they the same parts as a ba/bf, or different part number? cheers in advance
|
||
| Top | |
||
| Papa Smurf |
|
||
|
Brake and Clutch pedal pads are the same as BF.
Ford show a different number for the Accelerator pedal. But, I think you could get away with the Kit that Ford supplies for the Manual BA/BF if you have the Adjustable Accel pedal. It costs $110.00, part number BA 2C541AA. There is an Auto Kit for $283.00, part number BAF 2K541A but the Accelerator pedal you have on now needs to be an Adjustable one? Attachment: Pedals.JPG These are listed for vehicles 2005 and onwards but I can't see why you couldn't use them? In the pic, the one on the right is the adjustable type pedal. 
|
||
| Top | |
||
| Papa Smurf |
|
||
|
phatba wrote: what do you mean by adjustable? what part can adjust? if i remember the ba accelerator pedal pad had a rubber backing and just basically slipped over the bare pedal? To be honest I haven't seen one except in the Parts Catalogue, In the Pic I posted, take a look at the part 9G736 and the 9N736A, they are parts for the Adjustable pedal. |
||
| Top | |
||
| Papa Smurf |
|
||
|
The FG does have a special pedal for the Accelerator with the Metal Pad, BG 9N736B $174.00 for Automatic and BG 9N736D $176.00 for Manual.
Sorry I didn't give you a good enough description. Here is a pic of the FG pedals, the one on the right is the metal one. Attachment: ped.jpg
|
||
| Top | |
||
| 4LEDboy |
|
|||
|
Hey PapaSmurf
Are there differences between the AU XR6 VCT and HP looms? I'm affraid to ask but whats a new HP engine loom worth (the whole lot from the ECU to fusebox) Cheers!
_________________ Adelaide Motorplex < Click on it! You know you want too! Quote: Thats not the point *a**hole
|
|||
| Top | |
|||
| Papa Smurf |
|
||
|
It would appear that the Engine wiring loom is different for the VCT in AUI, II, III.
The wiring harness is also different for Man and Auto, the trans wiring comes with the trans harness. The ECU Harness only is different for LPG and ABS. The standard one is ER 12A581C $487.00, the ABS one is ER 12A581A $526.00, the ABS with LPG AUC 12A581A $812.00. Hope that helps 
|
||
| Top | |
||
| mattymc |
|
||
|
Hey Papa Smurf,
Can you still get Eb Gt gear boots?. Part number and price if available. Also Ed manual console insert that goes over the boot. Thanks mate. |
||
| Top | |
||
| Papa Smurf |
|
||
|
mattymc wrote: Hey Papa Smurf, Can you still get Eb Gt gear boots?. Part number and price if available. Also Ed manual console insert that goes over the boot. Thanks mate. Matt, saw your other post and answered it there sorry ford-interior-f14/can-you-still-get-eb-gt-gear-boots-t83621.htmlAs to the boot surround, you cannot get them new anymore for the GT  The standard one is still available, maybe you can use it and make it look like the GT?This guy sells woodgrain inserts for EA/EB/ED manual and auto's http://cgi.ebay.com.au/Ford-EA-EB-ED-NA ... 911.c0.m14 |
||
| Top | |
||
| gogetta |
|
|||
|
Papa Smurf wrote: It would appear that the Engine wiring loom is different for the VCT in AUI, II, III. The wiring harness is also different for Man and Auto, the trans wiring comes with the trans harness. The ECU Harness only is different for LPG and ABS. The standard one is ER 12A581C $487.00, the ABS one is ER 12A581A $526.00, the ABS with LPG AUC 12A581A $812.00. Hope that helps isnt the engine and ecu loom/harness the same thing... the wiring from ecu to engine sensors would have to be different....so not sure how u say the ecu harness is only different for lpg and abs....????
_________________ |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
gogetta wrote: isnt the engine and ecu loom/harness the same thing... the wiring from ecu to engine sensors would have to be different....so not sure how u say the ecu harness is only different for lpg and abs....???? The ECU (the left side) harness is separate, the Engine compartment harness on the Right side is separate, The main engine compartment harness is separate and the you have an Engine wiring harness. Here are pics The first pic, items 1,3,9 are the 3 harnesses Attachment: EngWir1.JPG Second pic Item 1 is the engine/trans loom Attachment: EngWir2.JPG
|
||
| Top | |
||
| XR-Lane |
|
|||
|
Papa, I need to know mate!
Is there any possible way to get a code for a EL factory head deck if the vin number is lost? A mate of mine on here B0XCAR has just picked up a full cappa interior for his car and has no need for the head deck. But he never got the code for it and obviously does not have the vin number from the car it came from. Cheers |
|||
| Top | |
|||
| TROYMAN |
|
||
|
papa smurf?
are the au/ef cruise control buttons available seperate from the steering wheel??? |
||
| Top | |
||
| fordman351 |
|
|||
|
Dear Papa Smurf,
I'm in need of genuine EL Fairmont Ghia front chrome bumper inserts, are they still available? If not might you know of the manufacturing company that made them for Ford? |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
TROYMAN wrote: papa smurf? are the au/ef cruise control buttons available separate from the steering wheel??? Yes they are, the EL ones EL 9C888A1 $278.00 and the AU ones are, Series 1 ER 9C888A $128.00 and the Series II III AU2 9C888A $279.00, both of the AU ones come with the Audio switches. |
||
| Top | |
||
| Papa Smurf |
|
||
|
fordman351 wrote: Dear Papa Smurf, I'm in need of genuine EL Fairmont Ghia front chrome bumper inserts, are they still available? If not might you know of the manufacturing company that made them for Ford? The ONLY ones still available from Ford are the Fairmont ones, the Ghia/Fairlane/LTD are now obsolete. The Fairmont ones, EL 17E914D and EL 17E915D are $150.00 each. A bloke that Troyman located for his ED moulds may be able to assist? His name is Bill Aitken duramouldsouth@yahoo.com.au |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 3 guests |
