 |
|
|
|
|
|
|
|
|
|
Col L
Fordmods Newbie
Posts: 2
Joined: 19 Jun 2007
Location: Sydney NSW, Australia
View User Gallery (0)
|
 Posted: Sat Jul 14, 2007 5:34 pm Post subject: '03 BA Falcon OEM Towing Wiring Questions |
 |
|
Hope someone can assist.
I am trying to help a friend get his Falcon set up for towing a Van that he has ordered. He has an Auto 6 without reversing Sensors and has the Ford OEM heavy duty towing pack fitted. He is going to fit an Electric Brake controller (Prodigy) and we have been told that the standard Ford wiring already brings the brake wire (blue) from the 12pin socket to the dash area to a purpose built brake controller plug with power, earth, brake switch and brake wire already available in that plug. Before we pulled the car apart to find this I thought I would ask if anyone has any knowledge or documentation on the standard Ford wiring.
In addition to info on the tow brake wire set up I am interested in the routing and source of the "power" wire (pin9) that is connected to the 12pin socket as this is permanently powered even when the ignition is off but he cannot find a fuse that is marked that it feeds the socket.
Any assistance is appreciated. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
xpression
Technical Contributor
Age:23
Posts: 2348
Joined: 07 Nov 2004
Location: Perth WA, Australia
View User Gallery (6)
|
| Posted: Mon Jul 16, 2007 1:05 am Post subject: |
|
|
| look just below the RHR tailight behind the trimming and you will find where the main trailer loom connects to the vehicle loom |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Col L
Fordmods Newbie
Posts: 2
Joined: 19 Jun 2007
Location: Sydney NSW, Australia
View User Gallery (0)
|
| Posted: Mon Jul 16, 2007 8:08 am Post subject: |
|
|
| Sorry, should have been more specific. I realised where the trailer loom connected, my questions relate to where do the brake and power wires in the main vehicle loom go. That is where do Ford take the blue brake and pink power wires. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
