Quick and Easy mods you can do on your BA/BF Falcons
This modification document is to provide information on how to complete quick mods to your BA or BF falcon. They are small enough to only take a few minutes each, they personalise the look of your car and are relatively cheap to do!!
Fairmont Ghia Bootlid Carpet
You only need the bootlid carpet and the 13 retaining scrivets
The Bootlid Carpet & Scrivets can be purchased from Ford or cheaper from our Site Sponsor FTG Auto Salvage for $106 for Fordmods members. They can also arrange postage
Contact them via email sales@ftagutosalvage.com.au or Phone (03) 9758 6900
Installation
Open the boot lid and place the carpet over the boot lock mech and bootlid.
Place the scrivets into each of the 13 holes.
Congratulations you have now installed your bootlid carpet!.
Ford BA XR Vehicles – Adding Lower Front Grille Mesh
Front Lower Grille Kit
These can be purchased from EBAY or can be purchased from our Site Sponsor FTG AUTO Salvage for $125!
Installation
Remove your Number Plates.
Remove the Black bumper insert at the top, this simply just unclips from the bar by pulling it outwards. Line your xr grill up with the black insert and make a mark on the insert 10mm from the edge. Then drill a hole on each of the marks using a drill bit the size of the tooth.
Place the black insert back into your bumper air dam, ensure that the insert has clipped back in. Place the XR6 Or XR8 badge (optional) onto the grille
Locate the 3 locating pins into your black insert. Push the bottom of the grille into your air dam and screw the self tapper into the bar.
Reinstall your number plate to your bar
Congratulations you have successfully installed your lower mesh grille.
