 |
|
|
|
|
|
|
|
|
|
|
XeTurbo
Fordmods - Smokin em up
Age:23
Posts: 298
Joined: 05 Nov 2004
Location: Canberra ACT, Australia
View User Gallery (0)
|
 Posted: Sun Dec 26, 2004 5:03 pm Post subject: Cleaning Carbies - Holley's |
 |
|
I was just after some info on giving my holley a clean out, i got some s**t petrol the other day from batemans bay and since then it has been running pretty crappy and coughing a little, and i think my carby might need a clean, its has the symptoms of running the car with the choke on? could a new air filter help? and what can i clean on my carby, with out like pulling it all apart as its only fairly new.
cheers John. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
xd351wgn
Fordmods Parts Gopher
Age:23
Posts: 61
Joined: 02 Dec 2004
Location: HOME OF SUMMERNATS ACT, Australia
View User Gallery (0)
|
| Posted: Sun Dec 26, 2004 6:10 pm Post subject: |
|
|
| if you look at the holley books i lent you ( you had better still have them!!) they will tell you all you need to know! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
XeTurbo
Fordmods - Smokin em up
Age:23
Posts: 298
Joined: 05 Nov 2004
Location: Canberra ACT, Australia
View User Gallery (0)
|
| Posted: Mon Dec 27, 2004 12:20 am Post subject: |
|
|
| yes tom i still have them! might give it a look over! so hows your car getting along? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
master
Fordmods Parts Gopher
Donating Member
Age:33
Posts: 88
Joined: 09 Nov 2004
Location: IPSWICH QLD, Australia
View User Gallery (3)
|
| Posted: Mon Dec 27, 2004 7:26 am Post subject: |
|
|
| There is a spray you can get, I forget what it is called, I think I got it from Supercheap. Anyway I used some on the 2brl weber of my old xd 4.1. Make sure you wear rubber gloves, I didnt, and I found out how corrosive this stuff is. It removed all the grit, grime and build-up in my carbie, and brought it back looking like brand new. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
xd351wgn
Fordmods Parts Gopher
Age:23
Posts: 61
Joined: 02 Dec 2004
Location: HOME OF SUMMERNATS ACT, Australia
View User Gallery (0)
|
| Posted: Mon Dec 27, 2004 8:22 am Post subject: |
|
|
Carbi clean, will clean it up dude. i got some so give me a call. and come pick up your s**t!!  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Sketch
Fordmods Parts Gopher
Posts: 75
Joined: 02 Dec 2004
Location: Woodlands WA, Australia
View User Gallery (8)
|
| Posted: Mon Dec 27, 2004 10:30 pm Post subject: |
|
|
depends how thorough you want to be dude, a rebuild kit is pretty inexpensive, and make a worthwhile difference, and often the needle's get grit in them than can only be dislodged by compresses air or a tooth brush,,, if your goin that far you might as well get the kit and do it perfectly,, its worth it,
if you have a vaccum secondary carb, make sure to check the diaphram in the secondary butterfly's they often become weak or porus, causing improper operation. and not enough air,,, is never fun  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
eed-250
Fordmods - Getting Side Ways
Posts: 1581
Joined: 05 Nov 2004
Location: Perth WA, Australia
View User Gallery (2)
|
| Posted: Tue Dec 28, 2004 3:43 am Post subject: |
|
|
If it helps when i was looking up prices i found a place which does holley rebuilds for 280 dollars.
The old mustang needs one baaaaaaaaad
flames are NOT GOOD. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
XeTurbo
Fordmods - Smokin em up
Age:23
Posts: 298
Joined: 05 Nov 2004
Location: Canberra ACT, Australia
View User Gallery (0)
|
| Posted: Tue Dec 28, 2004 10:29 am Post subject: |
|
|
well my carby is only 1.5 years old so it shouldnt be up for a rebuild yet i dont think? and my baseplate on the carby is only 6 months old. i think i have just clogged it from, s**t petrol or something?
anyways ill give it a look, also would degreaser be ok to spray down the carby? or will it damage stuff? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Sketch
Fordmods Parts Gopher
Posts: 75
Joined: 02 Dec 2004
Location: Woodlands WA, Australia
View User Gallery (8)
|
| Posted: Tue Dec 28, 2004 11:13 am Post subject: |
|
|
| depends if its water or solvent based degreaser, water based isnt great to get inside the bores, and solvent based can corrode the rubber inside the carby. o'rings ect. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
XeTurbo
Fordmods - Smokin em up
Age:23
Posts: 298
Joined: 05 Nov 2004
Location: Canberra ACT, Australia
View User Gallery (0)
|
| Posted: Tue Dec 28, 2004 4:54 pm Post subject: |
|
|
| i took my carby off today and soaked it in degreaser and cleaned it right up, and took my jets out and cleaned them, and now it revs up very quickly, but whilst driving and accellerating it takes off awesome gets to around 2 and a bit grand then coughs slightly and then picks up again, its got me buggered, im thinking my fuel filter could be giving me problems? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Sketch
Fordmods Parts Gopher
Posts: 75
Joined: 02 Dec 2004
Location: Woodlands WA, Australia
View User Gallery (8)
|
| Posted: Tue Dec 28, 2004 5:01 pm Post subject: |
|
|
have you set your float levels correctly? it could be too low and hitting a lear spot during acceleration, and when accel levels out, it fills back up enough,,
or it could be fuel filter, but that usually clogs up at higher revs and stays clogged untill teh revs drop. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
XeTurbo
Fordmods - Smokin em up
Age:23
Posts: 298
Joined: 05 Nov 2004
Location: Canberra ACT, Australia
View User Gallery (0)
|
| Posted: Tue Dec 28, 2004 7:39 pm Post subject: |
|
|
| nah i havent played with my float levels, i lowered the secondaries heaps the other day because i thought it was running s**t, i might check the float levels and see how that goes. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
| (c)2002-2008 Matti Jones and Brad Evans |
[39 queries :: 1.69313 seconds ]
|
|
