 |
 |
 |
 |
|
 |
 |
 |
 |
 |
kiwishau Fordmods Newbie
Posts: 15 Joined: 07 Dec 2004 Location: Sydney NSW, Australia
View User Gallery (0)
 |
Posted: Thu Dec 30, 2004 9:21 am Post subject: Air Leak |
|
|
I have a serious hissing sound on left front of the engine (3.9 6cyl) approximately around the distributor. It is a constant hiss very loud and does not change with revs.
Have checked all pipes but cannot find it.
Have taken the air filter off held my hand over the intake and the hiss is still there. Holding my hand over the intake does not cause the engine to stall which means it is getting air froom somewhere else.
Have removed and cleaned the ISC, checked the breather pipes and all appears to be ok.
Any suggestions or ideas on what it is |
|
| Back to top |
|
 |
|
|
 |
 |
 |
 |
 |
Interceptor Fordmods - Getting Side Ways
Age:27 Posts: 7287 Joined: 05 Nov 2004 Location: Somewhere in QLD, Australia
View User Gallery (12)
 |
Posted: Thu Dec 30, 2004 3:21 pm Post subject: |
|
|
| grab a can of aerostart and go nuts! |
|
| Back to top |
|
 |
|
|
 |
 |
 |
 |
 |
Lynchman Fordmods Newbie
Age:29 Posts: 7 Joined: 14 Dec 2004 Location: Ipswich QLD, Australia
View User Gallery (0)
 |
Posted: Thu Dec 30, 2004 8:52 pm Post subject: air leak |
|
|
| ckeck for leak around the intake manifild |
|
| Back to top |
|
 |
|
|
 |
 |
 |
 |
 |
ThinkTank Fordmods - Smokin em up
Age:26 Posts: 258 Joined: 09 Dec 2004 Location: Sydney NSW, Australia
View User Gallery (4)
 |
Posted: Fri Dec 31, 2004 2:45 am Post subject: |
|
|
| what does areostart do? |
|
| Back to top |
|
 |
|
|
 |
 |
 |
 |
 |
Interceptor Fordmods - Getting Side Ways
Age:27 Posts: 7287 Joined: 05 Nov 2004 Location: Somewhere in QLD, Australia
View User Gallery (12)
 |
Posted: Fri Dec 31, 2004 3:09 am Post subject: |
|
|
| spray it aaround the suspected leak area sparingly (it's highly flammable, spray too much around and a stray spark or a dodgy plug lead might cause it to blow) if/when you find the leak, the engine will rev up a big, idle erraticly or just go off its tits! |
|
| Back to top |
|
 |
|
|
 |
 |
 |
 |
 |
ThinkTank Fordmods - Smokin em up
Age:26 Posts: 258 Joined: 09 Dec 2004 Location: Sydney NSW, Australia
View User Gallery (4)
 |
Posted: Fri Dec 31, 2004 3:27 am Post subject: |
|
|
| Interceptor wrote: | | spray it aaround the suspected leak area sparingly (it's highly flammable, spray too much around and a stray spark or a dodgy plug lead might cause it to blow) if/when you find the leak, the engine will rev up a big, idle erraticly or just go off its tits! |
So its not used to aid the situation its only to find out where the problem originates? |
|
| Back to top |
|
 |
|
|
 |
 |
 |
 |
 |
kiwishau Fordmods Newbie
Posts: 15 Joined: 07 Dec 2004 Location: Sydney NSW, Australia
View User Gallery (0)
 |
Posted: Sun Jan 02, 2005 12:00 pm Post subject: Air leak |
|
|
| Yep inlet manifold gasket. Front cylinder gasket in particular. What an absolute bugger to fix. Big hands small spaces but got there in the end |
|
| Back to top |
|
 |
|
|
 |
 |
 |
 |
 |
ndroo Fordmods - Smokin em up
Age:22 Posts: 204 Joined: 06 Nov 2004 Location: Kurri Kurri NSW, Australia
View User Gallery (2)
 |
Posted: Mon Jan 03, 2005 8:00 am Post subject: |
|
|
| shouldnt crack on a car that age, really its crazy if it has tho i know people have it happen regularly. Check ur pipes that come off the back of the inlet and then go into a little 4 way rubber connector and some of the pipes go into ur firewall. That tends to leak and u cant see it...wiggle them and you might block it (speaking from experiance lol). Mine was reving at like 1.3k rpm while i had this prob, too much air getting in. |
|
| Back to top |
|
 |
|
|
 |
 |
 |
 |
 |
ndroo Fordmods - Smokin em up
Age:22 Posts: 204 Joined: 06 Nov 2004 Location: Kurri Kurri NSW, Australia
View User Gallery (2)
 |
Posted: Mon Jan 03, 2005 8:01 am Post subject: |
|
|
| btw on that note it might not be related to the intake system, it can be part of ur heater system and the vacum tubes leaking! |
|
| Back to top |
|
 |
|
|
 |
 |
 |
 |
 |
|
 |
| |
 |
|