Home |  Forums |  Search |  My Profile |  Chat  Photo Gallery |  Events Calendar |  Technical Documents  No messages |  New Posts |  Watched Topics |  Register   [b]FMX HELP, NOt pumping oil[/b]          Forum Index -> V8 Workshop Latest ratings Highest-ranked posts Highest-ranked topics Highest-ranked posters   steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Tue Jan 04, 2005 1:31 pm    Post subject: [b]FMX HELP, NOt pumping oil[/b] Can someone please help me, i just put another FMX in, with a new torque convertor, new lines, and a new cooler, after the last box, filled with water on a flooded road. Everything is put back as it come off..... 10 litres of oil, tail shaft fitted, gear lever connected to transmission. If i pull the hose off the oil cooler, oil hasnt travelled in there at all.!! I also put a new filter on. HELP PLEASE [u][/u] Back to top EBXR8380 Fordmods - Getting Side Ways Age:55 Posts: 2498 Joined: 07 Nov 2004 Location: Penrith NSW, Australia View User Gallery (4) Posted: Tue Jan 04, 2005 1:47 pm    Post subject: I have to ask but you did bolt the converter up ??? Sorry I don't mean to belittle you, but it has happened... Back to top steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Tue Jan 04, 2005 1:50 pm    Post subject: Yeah, its ok, convertor bolted up!!!! I think it might be stuffed, its not a new one like i said, its second hand, my old one was ok, but its been in the weather, got water in it. Back to top EBXR8380 Fordmods - Getting Side Ways Age:55 Posts: 2498 Joined: 07 Nov 2004 Location: Penrith NSW, Australia View User Gallery (4) Posted: Tue Jan 04, 2005 1:56 pm    Post subject: Umm ?? I'm no FMX or auto expert but it MAY just be the converter? Wash/ clean the old one ??? Did you fill converter with atf before installing ? Back to top steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Tue Jan 04, 2005 1:59 pm    Post subject: I drained the old oil out of it,b ut didnt refill it, shouldnt it pump itself Back to top steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Tue Jan 04, 2005 2:02 pm    Post subject: if i take the starter motor off, and remove the cover to turn the convertor i can fill it that way? through the drain hole???? Back to top steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Tue Jan 04, 2005 2:15 pm    Post subject: what if i jack the back of the car up, would the oil run into the convertor? Back to top EBXR8380 Fordmods - Getting Side Ways Age:55 Posts: 2498 Joined: 07 Nov 2004 Location: Penrith NSW, Australia View User Gallery (4) Posted: Tue Jan 04, 2005 2:21 pm    Post subject: Don't think so?? There is a plug on converter ? Check ?? Back to top steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Tue Jan 04, 2005 2:29 pm    Post subject: yeeah there is, but its against the fly wheel, Back to top EBXR8380 Fordmods - Getting Side Ways Age:55 Posts: 2498 Joined: 07 Nov 2004 Location: Penrith NSW, Australia View User Gallery (4) Posted: Tue Jan 04, 2005 2:33 pm    Post subject: Undo the four bolts that hold it to flex plate, slide converter back and try...??? Back to top steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Tue Jan 04, 2005 2:45 pm    Post subject: ok, ill see how i go Back to top steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Tue Jan 04, 2005 2:52 pm    Post subject: ok, it is possible to fill up when connected to the fly wheel, the fly has a hole in it for the draid plug to slot through. I touched the convertor, it was very hot, as its been running for a while... which tells me there is hot oil in it, but its not pumping in to the lines? hmmmmmm Back to top steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Tue Jan 04, 2005 2:53 pm    Post subject: i got the back wheels off the ground.... when i rev it hard, the wheels spin slowly!!!! what does tha mean? Back to top Interceptor Fordmods - Getting Side Ways Age:26 Posts: 7287 Joined: 05 Nov 2004 Location: Somewhere in QLD, Australia View User Gallery (12) Posted: Tue Jan 04, 2005 7:16 pm    Post subject: have you checked the fluid level after running it?if the converter was dry, it might've taken all the fluid in the pan to fill the converter Back to top Macca Fordmods - Getting Side Ways Age:36 Posts: 3204 Joined: 05 Nov 2004 Location: Singleton NSW, Australia View User Gallery (15) Posted: Tue Jan 04, 2005 9:09 pm    Post subject: If none of the ideas posted works for you so far, pull the FMX back out, spin the torque converter, does it feel like it is turning something and located right into the bell housing, sometimes if the torque converter was not located properly before trying to refit the auto, you can break the pump. (not trying to scare you) And you don't need to refill the torque converter, the drain plug is just that, a drain plug, if the transmission is full of oil the pump will pump oil into it. Back to top steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Sat Jan 08, 2005 8:13 am    Post subject: The latest.... I drained the oil out of the convertor........... BROWN s**t came out,,,, so then i took th pan off to check the oil i put in it, still red, the filter is fine? The oil isnt going into the convertor. So i putoil in the convertor with a hand pump.. Wheel spin about a inch a minute... The cooler lines now have a few small drops in it.. Could it be a blockage? Back to top steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Sun Jan 09, 2005 3:15 pm    Post subject: HHEEELLLLPPPPP PLEASE FMX STILL NOT PUMPING ive tried everything, and nothing is working!!!!! Back to top steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Sun Jan 09, 2005 3:18 pm    Post subject: HHEEELLLLPPPPP PLEASE FMX STILL NOT PUMPING ive tried everything, and nothing is working!!!!! Back to top steiphen Fordmods Oompa Loompa Age:28 Posts: 22 Joined: 03 Dec 2004 Location: Sydney NSW, Australia View User Gallery (5) Posted: Thu Jan 13, 2005 5:32 pm    Post subject: PROBLEM FOUND well, we droped the box out..... i read a fmx book with my mate ken, who i meet on this site.... he figured out it was the low pressure pump, which is bolted in the bell housing...,,, The large cog was cracked!!!!! not sure how, but it has something to do with me forceing the bell housing bolts in because it wasnt lined up properly!!! so next time a dowel wont line up... dont force it!!!! thanks for ya s help!!! Back to top Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First             Forum Index -> V8 Workshop Page 1 of 1   (c)2002-2008 Matti Jones and Brad Evans [46 queries :: 0.04045 seconds ]