Return To Fordmods Home Page
 Home |  Forums |  Search |  My Profile |  Chat
 Photo Gallery |  Events Calendar |  Technical Documents
 No messages |  New Posts |  Watched Topics |  Register  
Dash lights (Blinker arrows and other lights)

 
Post new topic   Reply to topic    Forum Index -> 6 Cylinder Workshop
 
ThinkTank
Fordmods - Smokin em up



Age:26
Posts: 258
Joined: 09 Dec 2004
Location: Sydney NSW, Australia

View User Gallery (4)

 
PostPosted: Fri Jan 07, 2005 2:13 am    Post subject: Dash lights (Blinker arrows and other lights) Reply with quote

Im sick of driving my car with some Dash lights missing, The blinker lights left and right dont work, the kilometer and distance lights dont work (but can still read it if i use torch...

is it a hard job to buy the lights from ford and install them?
Back to top
MRE-50L
Fordmods Junkie




Posts: 2304
Joined: 05 Nov 2004
Location: West Ryde - Sydney NSW, Australia

View User Gallery (50)

 
PostPosted: Fri Jan 07, 2005 6:03 am    Post subject: Reply with quote

it is a really easy job to do ,
remove radio facia-
then remove the outer facia , disconnecting central locking ,clock,and the other 2 on the right side of it ,
then its 4 screws that hold inthe cluster - 2 wire plugs behind icon_smile.gif
Back to top
Dellboy999
Fordmods - Getting Side Ways



Age:37
Posts: 1039
Joined: 05 Nov 2004
Location: Melbourne VIC, Australia

View User Gallery (5)

 
PostPosted: Fri Jan 07, 2005 8:12 am    Post subject: Reply with quote

You have checked all the fuses first right ?
Back to top
ThinkTank
Fordmods - Smokin em up



Age:26
Posts: 258
Joined: 09 Dec 2004
Location: Sydney NSW, Australia

View User Gallery (4)

 
PostPosted: Fri Jan 07, 2005 9:32 am    Post subject: Reply with quote

Just checked the fuses, they all seem to be ok .. no fuse for "auto cc" "pwr wnd" which would be like power windows and cruise control?

which fuse is for the dash lights? whats its calling on the fuse box?
Back to top
Dellboy999
Fordmods - Getting Side Ways



Age:37
Posts: 1039
Joined: 05 Nov 2004
Location: Melbourne VIC, Australia

View User Gallery (5)

 
PostPosted: Fri Jan 07, 2005 9:50 am    Post subject: Reply with quote

easy way is when you put the parkers on, the dash and other lights come on, so same fuse I believe.

Do the blinkers actually work ? , try the hazards too.

I do believe you will have blown bulbs, just remove the dash and replace, remember to test before putting it all back properly as if there is a short causing the problem pulling in and out all the time gets just a little frustrating.
Back to top
ThinkTank
Fordmods - Smokin em up



Age:26
Posts: 258
Joined: 09 Dec 2004
Location: Sydney NSW, Australia

View User Gallery (4)

 
PostPosted: Fri Jan 07, 2005 10:00 am    Post subject: Reply with quote

Dellboy999 wrote:
easy way is when you put the parkers on, the dash and other lights come on, so same fuse I believe.

Do the blinkers actually work ? , try the hazards too.

I do believe you will have blown bulbs, just remove the dash and replace, remember to test before putting it all back properly as if there is a short causing the problem pulling in and out all the time gets just a little frustrating.


naa the blinkers work, left and right outside,.. it only does not SHOW on the dash...
Back to top
4.9 EF Futura
Moderator



Age:27
Posts: 8658
Joined: 05 Nov 2004
Location: Adelaide CBD SA, Australia

View User Gallery (37)

 
PostPosted: Fri Jan 07, 2005 10:03 am    Post subject: Reply with quote

ThinkTank wrote:
Just checked the fuses, they all seem to be ok .. no fuse for "auto cc" "pwr wnd" which would be like power windows and cruise control?


Auto CC likely to be climate control... but anyways.

As the guys have said, just take the cluster out and replace the blubs which are likely to have been blown. Good chance to do a neon dash conversion if that floats your boat.

I dunno if there's a fuse for dash lights, i believe they are simply powered from the instrument cluster itself.
Back to top
ThinkTank
Fordmods - Smokin em up



Age:26
Posts: 258
Joined: 09 Dec 2004
Location: Sydney NSW, Australia

View User Gallery (4)

 
PostPosted: Fri Jan 07, 2005 11:24 am    Post subject: Reply with quote

ok i took the dash off .. im guessing i now have to unscrew the actual console thing , im scared that i wont know what to do once i pull that console off ... is it as easy as turning the ignition on and seeing which globes dont work and then replacing them with new globes?

i wanna make sure i dont fcuk something up.
Back to top
ThinkTank
Fordmods - Smokin em up



Age:26
Posts: 258
Joined: 09 Dec 2004
Location: Sydney NSW, Australia

View User Gallery (4)

 
PostPosted: Fri Jan 07, 2005 11:33 am    Post subject: Reply with quote

I just called city ford and asked them for dashboard lights for my EL 98, and the dude said theres 3 types of globes, some were 9 dollars something each and some were 4 dollars or so.. how do i know which globe goes where
Back to top
Dellboy999
Fordmods - Getting Side Ways



Age:37
Posts: 1039
Joined: 05 Nov 2004
Location: Melbourne VIC, Australia

View User Gallery (5)

 
PostPosted: Fri Jan 07, 2005 11:34 am    Post subject: Reply with quote

the globes are all a half twist insterted from the back twist and pull em out, put a new globe in and put it back in, easy as to do, pain in the butt to get to the back of the cluster though.

And yes you can do what you said, igntion on, and see what lights and what doesnt, if you can spare the expense, maybe consider replace the lot so you dont find another one gone next week icon_biggrin.gif
Back to top
Dellboy999
Fordmods - Getting Side Ways



Age:37
Posts: 1039
Joined: 05 Nov 2004
Location: Melbourne VIC, Australia

View User Gallery (5)

 
PostPosted: Fri Jan 07, 2005 11:36 am    Post subject: Reply with quote

Well you need 2 blinker ones, and a set of backlight ones, you can get from autobarn, repco etc as well.
Back to top
4.9 EF Futura
Moderator



Age:27
Posts: 8658
Joined: 05 Nov 2004
Location: Adelaide CBD SA, Australia

View User Gallery (37)

 
PostPosted: Fri Jan 07, 2005 11:36 am    Post subject: Reply with quote

ThinkTank wrote:
ok i took the dash off .. im guessing i now have to unscrew the actual console thing , im scared that i wont know what to do once i pull that console off ... is it as easy as turning the ignition on and seeing which globes dont work and then replacing them with new globes?

i wanna make sure i dont fcuk something up.


So you got the front dash cover off? Tidy work.

The instrument cluster has 4 screws as i recall. Top left, top right, bottom left and bottom right. Get in there with a torch if you need to see what's going on.

There are two connecting plugs, either side of the bottom of the cluster. Once you unplug these, the whole cluster will come out as 1 piece. You'll see all the bulb holders on the back, pretty easy to tell which one does what - you obviously know which ones arent lighting up so its simply a matter of replacing these.

Will make more sense when you see the back of the cluster icon_wink.gif
Back to top
ThinkTank
Fordmods - Smokin em up



Age:26
Posts: 258
Joined: 09 Dec 2004
Location: Sydney NSW, Australia

View User Gallery (4)

 
PostPosted: Fri Jan 07, 2005 11:43 am    Post subject: Reply with quote

4.9 EF Futura wrote:
ThinkTank wrote:
ok i took the dash off .. im guessing i now have to unscrew the actual console thing , im scared that i wont know what to do once i pull that console off ... is it as easy as turning the ignition on and seeing which globes dont work and then replacing them with new globes?

i wanna make sure i dont fcuk something up.


So you got the front dash cover off? Tidy work.

The instrument cluster has 4 screws as i recall. Top left, top right, bottom left and bottom right. Get in there with a torch if you need to see what's going on.

There are two connecting plugs, either side of the bottom of the cluster. Once you unplug these, the whole cluster will come out as 1 piece. You'll see all the bulb holders on the back, pretty easy to tell which one does what - you obviously know which ones arent lighting up so its simply a matter of replacing these.

Will make more sense when you see the back of the cluster icon_wink.gif


aha roger that...

gonna give it a shot now..

Bbl
Back to top
ThinkTank
Fordmods - Smokin em up



Age:26
Posts: 258
Joined: 09 Dec 2004
Location: Sydney NSW, Australia

View User Gallery (4)

 
PostPosted: Fri Jan 07, 2005 2:24 pm    Post subject: Reply with quote

lolz. was a piece of piss..

The only thing was finding the globes and drving around with no dash icon_biggrin.gif

Repco had one of the sort, but had to drive to ford to get the other blinker ones..

Overall, dificulty 2 of 10 more annoying then anything else.
Back to top
Display posts from previous:   
   
Post new topic   Reply to topic    Forum Index -> 6 Cylinder Workshop
Page 1 of 1

 
 
(c)2002-2009 Matti Jones and Brad Evans

[41 queries :: 0.07543 seconds ]