 |
|
|
|
|
|
|
|
|
|
|
japa62
Fordmods Parts Gopher
Donating Member
Age:46
Posts: 95
Joined: 05 Nov 2004
Location: Redcliffe QLD, Australia
View User Gallery (5)
|
 Posted: Fri Jan 07, 2005 7:00 pm Post subject: nolathane |
 |
|
| Now that the low's are in I need to replace the bushes etc. Can anyone recommend a decent deal on a nolathane or simular kit for the front end? I already have the powersteering bush's just need the rest. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
eb2fairmont
Fordmods - Getting Side Ways
Age:32
Posts: 961
Joined: 14 Nov 2004
Location: Adelaide SA, Australia
View User Gallery (3)
|
| Posted: Mon Jan 10, 2005 1:59 pm Post subject: |
|
|
For the front and rear nolthane kit you're looking at around $500 supplied from coventries (mototraders here in SA).
It's a piece of piss to install if you got the time, the backend stuff needs a press to do it.
Cheers,
David |
|
| Back to top |
|
|
|
|
|
|
|
|
|
japa62
Fordmods Parts Gopher
Donating Member
Age:46
Posts: 95
Joined: 05 Nov 2004
Location: Redcliffe QLD, Australia
View User Gallery (5)
|
| Posted: Mon Jan 10, 2005 6:38 pm Post subject: |
|
|
| eb2fairmont wrote: | For the front and rear nolthane kit you're looking at around $500 supplied from coventries (mototraders here in SA).
It's a piece of piss to install if you got the time, the backend stuff needs a press to do it.
Cheers,
David |
Thanx's David. Which bush need the press?? One of the Trailing arms ?? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
smoke_
Cruise Moderator
Age:24
Posts: 5834
Joined: 05 Nov 2004
Location: Brisbane QLD, Australia
View User Gallery (7)
|
| Posted: Wed Jan 12, 2005 6:50 pm Post subject: |
|
|
both of the trailing arms need them.
how many bushes are in the front, besides the swaybar bushes? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Disco Frank
Fordmods Junkie
Age:29
Posts: 13776
Joined: 05 Nov 2004
Location: Perth WA, Australia
View User Gallery (7)
|
| Posted: Wed Jan 12, 2005 9:11 pm Post subject: |
|
|
| smoke_rubber wrote: | both of the trailing arms need them.
how many bushes are in the front, besides the swaybar bushes? |
basically u have10 sway bar bussehs ( 4 eash side for the link arm) then the body ones)
ther are also the wishbone bushes but they would need a press as well |
|
| Back to top |
|
|
|
|
|
|
|
|
|
400kwgtr
Fordmods Oompa Loompa
Posts: 23
Joined: 14 Dec 2004
Location: sydney NSW, Australia
View User Gallery (0)
|
| Posted: Thu Jan 13, 2005 2:56 pm Post subject: |
|
|
| i nolathaned my ford a few months back, very worthwhile. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
EF 4.9
Fordmods Stock as a Rock
Posts: 139
Joined: 08 Nov 2004
Location: Meeka, Coonland WA, Australia
View User Gallery (4)
|
| Posted: Thu Jan 13, 2005 5:25 pm Post subject: |
|
|
A press would be recomended for the lower wishbone bushes. I managed to do mine without a press. but for all the effort, its much easier to take them to a machine shop and have the old ones pressed out and new ones pressed in.
If you'r feeling lucky you can use 1/2 inch threaded rod, a bigassed locknut socket, 3nuts and a washer slightly smaller than the steel bush shell. But its not easy. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
smoke_
Cruise Moderator
Age:24
Posts: 5834
Joined: 05 Nov 2004
Location: Brisbane QLD, Australia
View User Gallery (7)
|
| Posted: Thu Jan 13, 2005 9:35 pm Post subject: |
|
|
| i'd just take it to my work, 3 different presses lol, and plenty of machined bits and pieces of different sizes. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
| (c)2002-2009 Matti Jones and Brad Evans |
[35 queries :: 0.03232 seconds ]
|
|
