 |
|
|
|
|
|
|
|
|
|
Pane
Fordmods Tyre Shredder
Age:22
Posts: 345
Joined: 28 Nov 2004
Location: Melbourne VIC, Australia
View User Gallery (0)
|
 Posted: Tue Jan 18, 2005 11:16 am Post subject: au into xf |
 |
|
G'day
This has probably been covered before but i am wondering if it is possible to put an au2 motor into an xf.
What are the clearances like in the engine bay.
Cheers |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Interceptor
Fordmods - Getting Side Ways
Age:27
Posts: 7287
Joined: 05 Nov 2004
Location: Somewhere in QLD, Australia
View User Gallery (12)
|
| Posted: Tue Jan 18, 2005 7:33 pm Post subject: |
|
|
should drop straight in using XG Engine mounts
the bigger drama will be the electrics |
|
| Back to top |
|
|
|
|
|
|
|
|
|
smoke_
Cruise Moderator
Age:24
Posts: 5834
Joined: 05 Nov 2004
Location: Brisbane QLD, Australia
View User Gallery (7)
|
| Posted: Tue Jan 18, 2005 8:41 pm Post subject: |
|
|
| Interceptor wrote: | should drop straight in using XG Engine mounts
the bigger drama will be the electrics |
asorry to get off topic, but are the xg engine mounts different to ea/eb?
and yes it is possible to put an au motor in an xf. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
neil101
Fordmods - Smokin em up
Age:27
Posts: 241
Joined: 11 Dec 2004
Location: kellyville NSW, Australia
View User Gallery (0)
|
| Posted: Tue Jan 18, 2005 10:28 pm Post subject: |
|
|
| nope same up to ED only changed on EF upwards |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Interceptor
Fordmods - Getting Side Ways
Age:27
Posts: 7287
Joined: 05 Nov 2004
Location: Somewhere in QLD, Australia
View User Gallery (12)
|
| Posted: Tue Jan 18, 2005 10:31 pm Post subject: |
|
|
| smoke_rubber wrote: | | Interceptor wrote: | should drop straight in using XG Engine mounts
the bigger drama will be the electrics |
asorry to get off topic, but are the xg engine mounts different to ea/eb? |
f**k if i know, all i know is they're the ones u need to drop an EA-AU 4.0l into an XF |
|
| Back to top |
|
|
|
|
|
|
|
|
|
xr8 dismantler
Age:37
Posts: 3143
Joined: 06 Nov 2004
Location: MELBOURNE VIC, Australia
View User Gallery (0)
|
| Posted: Tue Jan 18, 2005 11:15 pm Post subject: |
|
|
| engine mounts are the same up to ED. the mounting plates on the chassie need to be changed to the XG ones.like you would when you change from a 6 to a 8 in a X series |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Pane
Fordmods Tyre Shredder
Age:22
Posts: 345
Joined: 28 Nov 2004
Location: Melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Wed Jan 19, 2005 4:21 pm Post subject: |
|
|
Whats the big drama with the electrics?
If you have the computer that goes with the motor wheres the problem.
Cheers |
|
| Back to top |
|
|
|
|
|
|
|
|
|
4.9 EF Futura
Moderator
Age:27
Posts: 8658
Joined: 05 Nov 2004
Location: Adelaide CBD SA, Australia
View User Gallery (37)
|
| Posted: Wed Jan 19, 2005 4:27 pm Post subject: |
|
|
| Pane wrote: | Whats the big drama with the electrics?
If you have the computer that goes with the motor wheres the problem.
Cheers |
ECU likes to talk with body control module and dashboard for smartlock/smartshield etc. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Pane
Fordmods Tyre Shredder
Age:22
Posts: 345
Joined: 28 Nov 2004
Location: Melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Wed Jan 19, 2005 5:07 pm Post subject: |
|
|
do you have to have that stuff conected or can you by pass it.
Cheers |
|
| Back to top |
|
|
|
|
|
|
|
|
|
JOSE
Fordmods - Getting Side Ways
Age:23
Posts: 2462
Joined: 07 Nov 2004
Location: geelong VIC, Australia
View User Gallery (4)
|
| Posted: Wed Jan 19, 2005 5:24 pm Post subject: |
|
|
| you would most likely have to go to an aftermarket ECU, so if you can get the BCM (or is it BEM - i forget) and the rest of the dash wiring i suggest you do, even then your gonna have troubles with the ignition lock, you should be able to run the au motor (with a coupla changes) with an EB (pre smatlock one) computer. (without the broadband manifold) |
|
| Back to top |
|
|
|
|
|
|
|
|
|
xr8 dismantler
Age:37
Posts: 3143
Joined: 06 Nov 2004
Location: MELBOURNE VIC, Australia
View User Gallery (0)
|
| Posted: Wed Jan 19, 2005 9:25 pm Post subject: |
|
|
If you use a series 1 au vct motor and computer with smartlock (ive got one for sale  )
you can buy a module from petroject that disables the smartlock and allows you to obsolete the BEM |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
