 |
|
|
|
|
|
|
|
|
|
BlownNc
Fordmods - Getting Side Ways
Age:25
Posts: 411
Joined: 05 Nov 2004
Location: Castlemaine VIC, Australia
View User Gallery (0)
|
 Posted: Fri Jan 21, 2005 8:40 pm Post subject: NC 5.0 Won't Start |
 |
|
| Sure it cant be much...fairlane wont start, it acts like its in a gear on the auto, it lights up all the warning lights but wont start....no signal on the wire leading to the solenoid on starter. Any ideas? The car has a vision CL2000 alarm fitted and im beginning to think the alarm is sus, but could there be something else sus thats causing it? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
teeys
Fordmods Parts Gopher
Age:25
Posts: 65
Joined: 10 Nov 2004
Location: brisbane QLD, Australia
View User Gallery (0)
|
| Posted: Fri Jan 21, 2005 8:48 pm Post subject: |
|
|
my auto stick in my NC is loose... i have to hold the stick firmly forward and to the left in park. else it does the same thing.. lights up.. no action.
i think this is due to the inhibitor switch as well as being a loose stick |
|
| Back to top |
|
|
|
|
|
|
|
|
|
BlownNc
Fordmods - Getting Side Ways
Age:25
Posts: 411
Joined: 05 Nov 2004
Location: Castlemaine VIC, Australia
View User Gallery (0)
|
| Posted: Fri Jan 21, 2005 8:54 pm Post subject: |
|
|
| Ran out and checked....no luck. Shifter is nice and tight, tried it anyway, to no luck. Maybe inhibitor switch? or could there be a relay, wire, etc that im missing? if anyone could tell me whats required for the car to start and i can start looking one by one thatd be wikid |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Mitch_
Cruise Moderator
Age:21
Posts: 5905
Joined: 05 Nov 2004
Location: Streets of Brisvegas QLD, Australia
View User Gallery (6)
|
| Posted: Fri Jan 21, 2005 8:59 pm Post subject: |
|
|
| tryed starting it in N? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
EBXR8380
Fordmods - Getting Side Ways
Age:55
Posts: 2556
Joined: 07 Nov 2004
Location: Penrith NSW, Australia
View User Gallery (4)
|
| Posted: Fri Jan 21, 2005 11:34 pm Post subject: |
|
|
Try bridging the inhibitor wires if this works the swotch is suspect ..Don't leave like this though its too dangerous...My guess is inhibitor switch is deffective or out of adjustement..
Check that switch wire that connects to starter motor also...The thin one..Check its connection try cleaning and re connecting with some graphite grease on contacts?? Check that all battery connections are tight, including earths from body to engine.... |
|
| Back to top |
|
|
|
|
|
|
|
|
|
BlownNc
Fordmods - Getting Side Ways
Age:25
Posts: 411
Joined: 05 Nov 2004
Location: Castlemaine VIC, Australia
View User Gallery (0)
|
| Posted: Sat Jan 22, 2005 4:09 pm Post subject: |
|
|
| ok...tried the inhibitor switch, tried the shifter, tried cleaning terminals...nothing. As far as i can see, power goes from the ignition switch - car alarm - relay - solenoid. Theres power at the ignition switch, but not at the Relay. Is there something else, like a fusible link? How can i test the alarm? Its a vision CL2000 |
|
| Back to top |
|
|
|
|
|
|
|
|
|
philaddis
Fordmods - Getting Side Ways
Posts: 695
Joined: 21 Dec 2004
Location: Perth WA, Australia
View User Gallery (0)
|
| Posted: Sun Jan 23, 2005 9:52 am Post subject: |
|
|
Does your car have smartock?
If yes it could be a dodgy BEM not recognising the codes from the ingnition barrel or being just plain broke!
You have not done any work to the car recently? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
BlownNc
Fordmods - Getting Side Ways
Age:25
Posts: 411
Joined: 05 Nov 2004
Location: Castlemaine VIC, Australia
View User Gallery (0)
|
| Posted: Sun Jan 23, 2005 10:07 am Post subject: |
|
|
| No smartlock...... |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Electroboy
Fordmods Stock as a Rock
Age:34
Posts: 152
Joined: 21 Jan 2005
Location: Brisbane QLD, Australia
View User Gallery (3)
|
| Posted: Wed Jan 26, 2005 8:45 am Post subject: |
|
|
| One way to check if your alarm is at fault , see if you have power at the inhibitor switch on the trany, if you do the alarm is fine, if not the alarm is at fault. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
EB XR8
Fordmods Oompa Loompa
Age:25
Posts: 48
Joined: 08 Nov 2004
Location: Brisbane QLD, Australia
View User Gallery (0)
|
| Posted: Thu Jan 27, 2005 10:00 am Post subject: |
|
|
| I had something similar in my XR8 the other day - although my car is a manual. I went to start it after driving and there was nothing, not even a kick over or that ticking sound when the battery is too f**k to turn the starter motor. I tried a couple of times and there was nothing. Good thing my car is manual so i thought f**k it, and just roll started it. When i got home i parked on a hill just in case it did it again but it started fine and have not had the problem since. Wierd!! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
