Home |  Forums |  Search |  My Profile |  Chat  Photo Gallery |  Events Calendar |  Technical Documents  No messages |  New Posts |  Watched Topics |  Register   SHIMS          Forum Index -> Wade Cams Latest ratings Highest-ranked posts Highest-ranked topics Highest-ranked posters   Wade Cams Commercial Sponsor Age:55 Posts: 267 Joined: 08 Nov 2004 Location: Melbourne VIC, Australia View User Gallery (0) Posted: Fri Feb 09, 2007 8:20 am    Post subject: SHIMS Members are advised that it necessary to fit an extra set of standard shims when fitting a "regrind" Wade cam. This is done in order to offset the amount that we grind off the lobe when we apply a modified profile to a standard shaft. Please don't hold me to this, but, my understanding is there are 2 different diameter shims available. Approx. 11mm and 14mm . The standard shims are 1.9mm thick. I could be wrong but the important thing is that the shims that you buy are the same dimension as those already fitted. Derrrr . Yes, l know, l'm stating the bleeding obvious. Cheers Chris WADE CAMS Back to top GRN-WGN Fordmods Stock as a Rock Posts: 150 Joined: 30 Mar 2005 Location: geelong VIC, Australia View User Gallery (0) Posted: Fri May 25, 2007 8:11 pm    Post subject: how much is a set of shims for ED i6? Back to top Wade Cams Commercial Sponsor Age:55 Posts: 267 Joined: 08 Nov 2004 Location: Melbourne VIC, Australia View User Gallery (0) Posted: Sat May 26, 2007 1:07 pm    Post subject: GRN-WGN wrote: how much is a set of shims for ED i6? We recommend that you buy them from your local Ford dealer. I believe they cost about $60.00 for the set. Back to top Display posts from previous: All Posts1 Day7 Days2 Weeks1 Month3 Months6 Months1 Year Oldest FirstNewest First             Forum Index -> Wade Cams Page 1 of 1   (c)2002-2008 Matti Jones and Brad Evans [30 queries :: 0.02531 seconds ]