 |
|
|
|
|
|
|
|
|
|
Leszek
Fordmods - Getting Side Ways
Posts: 882
Joined: 05 Nov 2004
Location: Sydney NSW, Australia
View User Gallery (2)
|
 Posted: Mon Nov 08, 2004 6:23 pm Post subject: rear right electric window trouble |
 |
|
our rear windows are rarely used and are keep child lock. however recently when using the real right it makes a crunching noise when going down and doesnt go completly up stop half way.
Is their an easy fix or is it a big $$$ job????
thanks |
|
| Back to top |
|
|
|
|
|
|
|
|
|
justfordima
Technical Contributor
Age:22
Posts: 2793
Joined: 06 Nov 2004
Location: Sydney NSW, Australia
View User Gallery (7)
|
| Posted: Mon Nov 08, 2004 6:53 pm Post subject: |
|
|
Im pretty sure its an alignment issue, and WD40/RP47 has been known to fix this problem... down side is you have to take the door apart...
I had the same problem, same window lol. I just left it, and the more I used, the less aparent it got, still makes the noises, but it goes up and down all the way.
Cheers |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Chicken
Technical Contributor
Age:24
Posts: 962
Joined: 05 Nov 2004
Location: Sydney NSW, Australia
View User Gallery (8)
|
| Posted: Mon Nov 08, 2004 6:57 pm Post subject: |
|
|
Sounds like the regulator might be gone? If so, a new one is I think roughly a bit over $100.
Before you worry about that though, it could just be some dirt or something stuck in the runners. Grab a can of silicone spray and give the runners down each side a good spray. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
One Drone
Fordmods - Getting Side Ways
Age:22
Posts: 2035
Joined: 05 Nov 2004
Location: Penrith NSW, Australia
View User Gallery (6)
|
| Posted: Mon Nov 08, 2004 8:48 pm Post subject: |
|
|
| Crunching sound is the gears in the regulator rubbing against eachother and wearing down the teeth due to a restriction somewhere.. Do as what has been previously afforementioned. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Interceptor
Fordmods - Getting Side Ways
Age:27
Posts: 7287
Joined: 05 Nov 2004
Location: Somewhere in QLD, Australia
View User Gallery (12)
|
| Posted: Mon Nov 08, 2004 10:58 pm Post subject: |
|
|
| might be the cable on its way out, but try lubing the channels first |
|
| Back to top |
|
|
|
|
|
|
|
|
|
joolz
Fordmods - Getting Side Ways
Age:34
Posts: 2477
Joined: 06 Nov 2004
Location: Melbourne VIC, Australia
View User Gallery (11)
|
| Posted: Wed Nov 10, 2004 12:34 am Post subject: |
|
|
| silicon sray is the best, u can get it from any auto shop or window shop, they use it to lubricate window runners!! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
AU-NVS
Fordmods Stock as a Rock
Age:23
Posts: 131
Joined: 05 Nov 2004
Location: Melbourne VIC, Australia
View User Gallery (5)
|
| Posted: Thu Nov 11, 2004 12:27 am Post subject: |
|
|
| both the rears do this in the eb..lucky its not my cruisin car otherwise my mates would suffocate LoL |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
