 |
|
|
|
|
|
|
|
|
|
|
|
surfn
Fordmods Parts Gopher
Posts: 75
Joined: 24 Jan 2007
Location: melbourne VIC, Australia
View User Gallery (0)
|
 Posted: Fri Feb 09, 2007 10:17 am Post subject: re-programme remote |
 |
|
| My remote is no longer working, have reprogrammed in the past, but i foget the sequence, can anybody help ?? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Jinxed
Fordmods Newbie
Posts: 10
Joined: 05 Nov 2004
Location: Melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Fri Feb 09, 2007 10:56 pm Post subject: |
|
|
Adding and Removing remote Keypads to the Smartlock module
Up to four Keypads can be programmed and used with the Smartlock Remote Central locking system.
If you have replaced the BEM, or new keypads are being added to the system, you will need to train the keypad codes to the module.
# 1. The ignition switch should be in the Off position, with all the doors shut and Unlocked.
# 2. Turn the ignition key to the ACCESSORY position and within 5 seconds, operates the rear demister switch exactly three times in quick succession.
(IE. Press the switch so the Demister light turns on, then off, then back on again.)
# 3. After the 5 seconds is up, the door locks will change state, to indicate that the BEM has entered keypad learn mode.
NOTE : All existing keypads at this point, have been erased from memory !
# 4. Press either buttons on the keypad that is to be trained. The door locks will change state twice, to indicate that the keypad has been added to the BEM memory.
# 5. Follow step 4. for each keypad that is to be added to the BEM memory. A maximum of 4 keypads can be added to the BEM memory.
NOTE : You must teach all remote keypads for the Smartlock module, before proceeding.
# 6. When you have taught all the remote keypads, turn the ignition to the Off position to leave the learn mode. The door locks will change
state to indicate a return to normal mode.
# 7. Check the function of both buttons on each keypad, to ensure that the keypad has been trained. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
surfn
Fordmods Parts Gopher
Posts: 75
Joined: 24 Jan 2007
Location: melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Tue Feb 13, 2007 11:08 am Post subject: |
|
|
| Thanks mate, if i was a smart bloke i would have checked around, seeings there are a number of posts already on this. thanks |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Jocool
Fordmods Newbie
Age:40
Posts: 1
Joined: 29 Oct 2006
Location: greystanes NSW, Australia
View User Gallery (0)
|
| Posted: Tue Apr 24, 2007 7:33 pm Post subject: |
|
|
A question from a dummie! 
I own a Falcon and a Fairlane. Can I get both cars to work with the one remote? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
sexyr6
Fordmods - Getting Side Ways
Age:31
Posts: 1043
Joined: 23 Dec 2004
Location: Mildura VIC, Australia
View User Gallery (25)
|
| Posted: Tue Apr 24, 2007 8:19 pm Post subject: |
|
|
| Jocool wrote: | A question from a dummie!
I own a Falcon and a Fairlane. Can I get both cars to work with the one remote? |
yes. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
SHADOW_351
Fordmods Tyre Shredder
Age:101
Posts: 361
Joined: 20 Aug 2006
Location: HERVEY BAY QLD, Australia
View User Gallery (2)
|
| Posted: Wed May 16, 2007 9:57 pm Post subject: |
|
|
| Jocool wrote: | A question from a dummie!
I own a Falcon and a Fairlane. Can I get both cars to work with the one remote? |
why would you want that? 
will you unlock both cars get in one and drive away leaveing the other unlocked?
or unlock both cars get in one lock both cars and drive off?
seems like a bit of f**k around |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Hyena
Fordmods - Getting Side Ways
Age:29
Posts: 1518
Joined: 06 Nov 2004
Location: The Shire, Sydney NSW, Australia
View User Gallery (14)
|
| Posted: Fri May 18, 2007 2:37 pm Post subject: |
|
|
On a related note, a flat battery shouldn't cause a remote to stop working should it ?
Mine went flat months ago and I just used the key in the mean time. I replaced the battery today and the light now comes on brightly but the doors don't unlock. I'll try the above learning method but I thought that was more a case of BEM learning the remote not vise versa... |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Waggin
Site Admin
Age:25
Posts: 6763
Joined: 18 Dec 2002
Location: Sydney NSW, Australia
View User Gallery (3)
|
| Posted: Sat May 26, 2007 3:36 pm Post subject: |
|
|
| Hyena wrote: | On a related note, a flat battery shouldn't cause a remote to stop working should it ?
|
No, they should work still! The remote codes are stored in some type of non volatile memory in the BEM. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Leroy
Fordmods - Getting Side Ways
Age:27
Posts: 3783
Joined: 09 Aug 2005
Location: Crib Point VIC, Australia
View User Gallery (0)
|
| Posted: Sun May 27, 2007 3:11 pm Post subject: |
|
|
| we have a lot of AU's that lose coding when the battery has been flat, or the battery holder coming unstuck(AUII owners will know what i mean), for a long time. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Hyena
Fordmods - Getting Side Ways
Age:29
Posts: 1518
Joined: 06 Nov 2004
Location: The Shire, Sydney NSW, Australia
View User Gallery (14)
|
| Posted: Sun May 27, 2007 6:01 pm Post subject: |
|
|
| I followed the above procedure and it works again now. Curious... |
|
| Back to top |
|
|
|
|
|
|
|
|
|
gpkitchu
Fordmods Newbie
Posts: 1
Joined: 13 Jun 2007
Location: Sydney NSW, Australia
View User Gallery (0)
|
| Posted: Thu Jun 14, 2007 11:59 am Post subject: Tried the steps and didnt work |
|
|
Hi, Im new to using Ford Falcon AU (year 2000) car and the car came with no remote. So i just bought the new remote from Ford dealer and followed the steps mentioned above.
It worked until Step 3.
# 4. Press either buttons on the keypad that is to be trained. The door locks will change state twice, to indicate that the keypad has been added to the BEM memory.
The above step 4 is not working for me  I even tried with different options like, keep the remote bit close to the key, or bit distance. The door locks didnt change to any state. I keep the LOCK or UNLOCK button the keypad for more than 5 seconds too. Nothing is changed.
#5 is works as usual that when i switched off.
Can you someone please explain, whether i am doing wrong? Thanks in advance.
| Jinxed wrote: | Adding and Removing remote Keypads to the Smartlock module
Up to four Keypads can be programmed and used with the Smartlock Remote Central locking system.
If you have replaced the BEM, or new keypads are being added to the system, you will need to train the keypad codes to the module.
# 1. The ignition switch should be in the Off position, with all the doors shut and Unlocked.
# 2. Turn the ignition key to the ACCESSORY position and within 5 seconds, operates the rear demister switch exactly three times in quick succession.
(IE. Press the switch so the Demister light turns on, then off, then back on again.)
# 3. After the 5 seconds is up, the door locks will change state, to indicate that the BEM has entered keypad learn mode.
NOTE : All existing keypads at this point, have been erased from memory !
# 4. Press either buttons on the keypad that is to be trained. The door locks will change state twice, to indicate that the keypad has been added to the BEM memory.
# 5. Follow step 4. for each keypad that is to be added to the BEM memory. A maximum of 4 keypads can be added to the BEM memory.
NOTE : You must teach all remote keypads for the Smartlock module, before proceeding.
# 6. When you have taught all the remote keypads, turn the ignition to the Off position to leave the learn mode. The door locks will change
state to indicate a return to normal mode.
# 7. Check the function of both buttons on each keypad, to ensure that the keypad has been trained. |
|
|
| Back to top |
|
|
|
|
|
|
|
|
|
Leroy
Fordmods - Getting Side Ways
Age:27
Posts: 3783
Joined: 09 Aug 2005
Location: Crib Point VIC, Australia
View User Gallery (0)
|
| Posted: Thu Jun 14, 2007 12:01 pm Post subject: |
|
|
take it to rhe dealer who you bought it off and get them to do it for you.
make sure they gave you the right remote. 2000 was the year they changed so you may of gotten the wrong one. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Froggy_Spawn
Fordmods Oompa Loompa
Age:42
Posts: 31
Joined: 07 Nov 2004
Location: Parramatta NSW, Australia
View User Gallery (0)
|
| Posted: Sat Sep 08, 2007 11:22 pm Post subject: |
|
|
just done this on an EBII it was'nt the rear demister switch 3 times
it was the boot release 3 times |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Brice
Fordmods Parts Gopher
Age:24
Posts: 53
Joined: 05 Nov 2004
Location: Rockhampton QLD, Australia
View User Gallery (2)
|
| Posted: Sun Sep 16, 2007 11:52 am Post subject: |
|
|
I have tried all of the above and still can't get this one to programme.
Any ideas?
Thanks
Brice |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
| (c)2002-2008 Matti Jones and Brad Evans |
[41 queries :: 0.06694 seconds ]
|
|
