 |
|
|
|
|
|
|
|
|
|
|
falcon_3512003
Fordmods - Smokin em up
Age:37
Posts: 236
Joined: 28 Nov 2006
Location: se melbourne VIC, Australia
View User Gallery (12)
|
 Posted: Wed Jan 03, 2007 4:52 pm Post subject: |
 |
|
| duno but i done the old spin the shaft and count job so im not sure myself but counted 3 and 3quater turns to 1 of the wheel so figerd 3.75 ? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
falcon_3512003
Fordmods - Smokin em up
Age:37
Posts: 236
Joined: 28 Nov 2006
Location: se melbourne VIC, Australia
View User Gallery (12)
|
| Posted: Thu Jan 04, 2007 10:42 am Post subject: |
|
|
| anyone know were i can get a 3.91 center and pinion from or what do they come out of ? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
TROYMAN
Technical Contributor
Age:34
Posts: 2940
Joined: 07 Nov 2004
Location: South Western Sydney NSW, Australia
View User Gallery (24)
|
| Posted: Thu Jan 04, 2007 11:01 am Post subject: |
|
|
| falcon_3512003 wrote: | | anyone know were i can get a 3.91 center and pinion from or what do they come out of ? |
hi
the nissan pintara (the one that looks like a skyline) has 3.89 ratio and will fit into falcon as they are the same series borg warner diff... |
|
| Back to top |
|
|
|
|
|
|
|
|
|
falcon_3512003
Fordmods - Smokin em up
Age:37
Posts: 236
Joined: 28 Nov 2006
Location: se melbourne VIC, Australia
View User Gallery (12)
|
| Posted: Thu Jan 04, 2007 3:02 pm Post subject: |
|
|
| is that the r38 and do i need to change the axels with it |
|
| Back to top |
|
|
|
|
|
|
|
|
|
timmytimtim
Fordmods Newbie
Age:19
Posts: 5
Joined: 27 Sep 2006
Location: Leeton NSW, Australia
View User Gallery (0)
|
| Posted: Wed Feb 21, 2007 1:07 pm Post subject: |
|
|
voxace,
how is it that you made a "shift kit" for $10? and does it work well or not? i have seen genuine ones for sale, one on ebay for 400 bucks.
And secondly people out there who run a powerchip or equivalent do you get much increase and are they worth their money, plus who paid what for them? i currently have PH4499 paceys installed and a 2.5" sports exhaust. The hub fan doesnt worry me, here in the country always movin so with the airflow the hub fan very rarely even comes in. and the only other mod i was looking at was cam, but for a slightly higher grade than xr6 with a vernier gear i was lookin at 600 bucks from crow cams... but i dnt want to go stupid so i have nothing down low, still want fuel economy, and i only have stock computer and map sensor... and still being at school and only only on p's i dnt have a lot of money and have to be careful how far i go...  any rev heads with suggestions of the most cost effective next step?
Thanks,
Tim |
|
| Back to top |
|
|
|
|
|
|
|
|
|
voxace
Technical Contributor
Age:23
Posts: 3092
Joined: 05 Nov 2004
Location: Ivanhoe NSW, Australia
View User Gallery (27)
|
| Posted: Wed Feb 21, 2007 3:35 pm Post subject: |
|
|
A shift kit is merely a a few resistors and some wires joined together... and if you call a nice solid chirp into second working, then yeah they work well.
Powerchips are worthless, get a cam for the money. Remember you can get a Wade cam, shims and a new rocker cover gasket for like $200.
And welcome to the site Tim.  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
timmytimtim
Fordmods Newbie
Age:19
Posts: 5
Joined: 27 Sep 2006
Location: Leeton NSW, Australia
View User Gallery (0)
|
| Posted: Wed Feb 21, 2007 3:41 pm Post subject: |
|
|
Thanks,
Sorry my mistake i first thought short shift for a manual, as in short throw, coz that's what i own, my bad. Sweet as, shame this cam from crow is worth 600 bucks i haven't heard of the brand of cam you use. Are they any good and is there a website or email address whereby i could get in touch with someone?
Cheers,
Tim |
|
| Back to top |
|
|
|
|
|
|
|
|
|
voxace
Technical Contributor
Age:23
Posts: 3092
Joined: 05 Nov 2004
Location: Ivanhoe NSW, Australia
View User Gallery (27)
|
| Posted: Wed Feb 21, 2007 3:47 pm Post subject: |
|
|
I use an RPD cam, they are no longer around to sell cams unfortunately.
If you are talking asbout the wade cams I mentioned, I have used them before too. They have a section on this forum, and are also at http://www.wadecams.com/
And yeah those shift kits are for autos. Thankfully you have a manual, which are so much better
The short shifters for those are a few hundred bucks. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Jaysen
Age:26
Posts: 1032
Joined: 05 Nov 2004
Location: Sydney NSW, Australia
View User Gallery (1)
|
| Posted: Wed Feb 21, 2007 5:14 pm Post subject: |
|
|
| The short shifters with a positive stop are worth thier weight as the T5 doesnt have built in stops for the shift rods, which means that the stops on the shifter will help preventing the shift forks from becoming bent. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
nick_167
Fordmods Newbie
Posts: 1
Joined: 15 Mar 2007
Location: Perth WA, Australia
View User Gallery (0)
|
| Posted: Fri Mar 16, 2007 1:01 am Post subject: |
|
|
Well done voxace... finally i hav found what i was looking for... everyone says do this do that but i can finally work out what i want/need in terms of bang for your buck!!!
 |
|
| Back to top |
|
|
|
|
|
|
|
|
|
ngibson
Fordmods Newbie
Age:18
Posts: 3
Joined: 18 Mar 2007
Location: Port Lincoln SA, Australia
View User Gallery (0)
|
| Posted: Sun Mar 18, 2007 6:32 pm Post subject: Spack Problems |
|
|
Hey i recently installed a Spack Cluster into my EA and the Taco, oil Pressure, Volt meter and odomoter dont work. Is this the wiring or what?
Some help would be greatly appreciated
Cheers |
|
| Back to top |
|
|
|
|
|
|
|
|
|
alfy
Fordmods - Getting Side Ways
Age:19
Posts: 4284
Joined: 02 Mar 2006
Location: Port Lincoln SA, Australia
View User Gallery (5)
|
| Posted: Sun Mar 25, 2007 11:07 pm Post subject: Re: Spack Problems |
|
|
| ngibson wrote: | Hey i recently installed a Spack Cluster into my EA and the Taco, oil Pressure, Volt meter and odomoter dont work. Is this the wiring or what?
Some help would be greatly appreciated
Cheers |
well well well, fancy seeing you here 
there is a pink wire behind the front right strut that is the tacho wire. ill pop round and wire it up for you if you like. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
ngibson
Fordmods Newbie
Age:18
Posts: 3
Joined: 18 Mar 2007
Location: Port Lincoln SA, Australia
View User Gallery (0)
|
| Posted: Mon Apr 02, 2007 10:56 am Post subject: ALFY U RAT |
|
|
HAHA ALFY U ARE GOING TO COME ROUND AND WIRE IT UP HEY!!!
I THINK ITS SOMETHINNG TO DO WITH THE CLUSTER ITSELF CAUSE THE ORIGINAL STILL WORKS AND YER..... 
SO WHEN ARE YOU COMING TO DO IT!!!!  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
ngibson
Fordmods Newbie
Age:18
Posts: 3
Joined: 18 Mar 2007
Location: Port Lincoln SA, Australia
View User Gallery (0)
|
| Posted: Mon Apr 02, 2007 10:59 am Post subject: haha |
|
|
| Im sitting right next to you and we are talking over the net haha so silly |
|
| Back to top |
|
|
|
|
|
|
|
|
|
alfy
Fordmods - Getting Side Ways
Age:19
Posts: 4284
Joined: 02 Mar 2006
Location: Port Lincoln SA, Australia
View User Gallery (5)
|
| Posted: Mon Apr 02, 2007 11:00 am Post subject: |
|
|
| nathan ur gonna get banned if u keep posting useless s**t in this thread |
|
| Back to top |
|
|
|
|
|
|
|
|
|
ba falcon
Fordmods Newbie
Age:22
Posts: 6
Joined: 24 Feb 2007
Location: CAIRNS QLD, Australia
View User Gallery (1)
|
| Posted: Tue May 08, 2007 6:36 pm Post subject: |
|
|
| Voxace sorry i used ur info on another forum i fixed it up and put a link to this sit and gave u credit for this info |
|
| Back to top |
|
|
|
|
|
|
|
|
|
efmarek
Fordmods Stock as a Rock
Age:22
Posts: 128
Joined: 13 Aug 2005
Location: Melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Tue Jun 05, 2007 10:41 pm Post subject: |
|
|
| WHY THE HELL DO PEOPLE BOTHER WITH BRANDS LIKE...WADE, CROW, LUKEY...etc ???!! THERE IS ONLY 1 THAT WILL GIVE U BEST PERFORMANCE IN ALL THEIR PRODUCTS....AND THATS Jim Mock Motorsport!!! WHY? Because all JMM products are INTENSELY R&D'd!!. AND THEY HAVE EVERYTHING YOU WILL EVER NEED TO MAKE YOUR FALCON FLY! SO DONT WASTE YOUR MONEY WITH OTHER BRANDS!! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
phongus
Fordmods Junkie
Age:23
Posts: 8851
Joined: 17 May 2005
Location: Melbourne VIC, Australia
View User Gallery (11)
|
| Posted: Tue Jun 05, 2007 11:40 pm Post subject: |
|
|
| efmarek wrote: | | WHY THE HELL DO PEOPLE BOTHER WITH BRANDS LIKE...WADE, CROW, LUKEY...etc ???!! THERE IS ONLY 1 THAT WILL GIVE U BEST PERFORMANCE IN ALL THEIR PRODUCTS....AND THATS Jim Mock Motorsport!!! WHY? Because all JMM products are INTENSELY R&D'd!!. AND THEY HAVE EVERYTHING YOU WILL EVER NEED TO MAKE YOUR FALCON FLY! SO DONT WASTE YOUR MONEY WITH OTHER BRANDS!! |
did you have to use capital letters? and its personal preference you goose...now shoo
phong =P~ |
|
| Back to top |
|
|
|
|
|
|
|
|
|
MIDA8939
Fordmods Newbie
Age:55
Posts: 6
Joined: 21 May 2006
Location: melton west VIC, Australia
View User Gallery (2)
|
| Posted: Tue Jun 05, 2007 11:41 pm Post subject: |
|
|
| efmarek wrote: | | WHY THE HELL DO PEOPLE BOTHER WITH BRANDS LIKE...WADE, CROW, LUKEY...etc ???!! THERE IS ONLY 1 THAT WILL GIVE U BEST PERFORMANCE IN ALL THEIR PRODUCTS....AND THATS Jim Mock Motorsport!!! WHY? Because all JMM products are INTENSELY R&D'd!!. AND THEY HAVE EVERYTHING YOU WILL EVER NEED TO MAKE YOUR FALCON FLY! SO DONT WASTE YOUR MONEY WITH OTHER BRANDS!! |
That my friend is a very big statement you need to be careful in how you come across with bias towards one particular item. There are a lot of people that i have heard of that in actual fact would argue the opposite.
It sounds like they have raped you for all your earnings and are hangin out your rear end. That is what competition is out there for people to have just that competitive market places JMMS are not the only companyto have been developing I6 fords You have company's such as Mike's dyno andby the way not bad for a company that trades as The 308 shop. Anyway enough of this shiiiiiit only gettin down to your level of blindness .End of the day people do have choices ....And as well as competitive PRICING JMM are not the cheapest around....But are one if not the dearest around for people on a budget...All there literature that has been in performance mag rebuild Have been on a EA/EB 3.9 I have not seen a article outlining enhancements on the later 4.0lt .If wrong on this part can somebody give me info as to magazines it has appeared in... Best of luck in drumming up business for them but i am afraid to say they wont be getting mine or a few other peoples I know   |
|
| Back to top |
|
|
|
|
|
|
|
|
|
skidder
Fordmods - Getting Side Ways
Age:19
Posts: 1095
Joined: 27 Mar 2006
Location: Brisbane QLD, Australia
View User Gallery (1)
|
| Posted: Wed Jun 06, 2007 8:04 am Post subject: |
|
|
| efmarek wrote: | | WHY THE HELL DO PEOPLE BOTHER WITH BRANDS LIKE...WADE, CROW, LUKEY...etc ???!! THERE IS ONLY 1 THAT WILL GIVE U BEST PERFORMANCE IN ALL THEIR PRODUCTS....AND THATS Jim Mock Motorsport!!! WHY? Because all JMM products are INTENSELY R&D'd!!. AND THEY HAVE EVERYTHING YOU WILL EVER NEED TO MAKE YOUR FALCON FLY! SO DONT WASTE YOUR MONEY WITH OTHER BRANDS!! |
you must be the biggest douche...i take it you got exhaust and a cam and pulled 180wkws on his dyno 
from what i've read there's no evidence that JMM has "INTENSELY R&D" (it's spelt wrong) with there being just as many good and bad reviews as any other place...so to come out and say WHY THE HELL DO PEOPLE BOTHER WITH BRADS LIKE WADE, CROW, LUKEY (all of which i've heard better reviews of then JMM) just shows you as naive |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
| (c)2002-2008 Matti Jones and Brad Evans |
[47 queries :: 0.06587 seconds ]
|
|
