 |
|
|
|
|
|
|
|
|
|
|
|
znipa-x
Fordmods - Getting Side Ways
Age:34
Posts: 568
Joined: 15 Jan 2005
Location: Sale VIC, Australia
View User Gallery (2)
|
 Posted: Sun Dec 09, 2007 6:11 pm Post subject: |
 |
|
| smo el wrote: | | Quote: | 4.9 EF Futura
Boys, boys, boys.
Any E-series V8 has a seperate transmisison controller - it was only the I6 that had transmission control intergrated with the ECU.
The trans control module is located under the dash, near your left leg.
Pin 7 on the TCM goes to the S5 solenoid. Pin 29 is the check line for the solenoid... 1ohm resistor for the solenoid, 20ohm for the check line...[/ |
To anuone who has done this to an el xr8, hopfully i dont sound too stupid but i thought i'd ask. just so i dont kill my trans
On an EL XR8 i use a 20ohm instead of a 18ohm, and a 1 ohm instead of a 5.6ohm. pin 7 is used instead of 71, and pin 29 is used instead of 81.
Cheers all |
what is 1ohm or 5.6ohm used for, I'm trying to figure out if the kit I have for a EF6 of AU6/8 is compatible with my EF8, I have a stage 2 shiftkit that has 18 ohms and 21 ohms, but I can't seem to find the 1 or 5.6 on any other wire combination, and there's only 3 wires coming out of the box.
also are the pin 7 and 29 you mention the pins on the TCM. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
znipa-x
Fordmods - Getting Side Ways
Age:34
Posts: 568
Joined: 15 Jan 2005
Location: Sale VIC, Australia
View User Gallery (2)
|
| Posted: Mon Dec 10, 2007 6:31 pm Post subject: |
|
|
| znipa-x wrote: |
what is 1ohm or 5.6ohm used for, I'm trying to figure out if the kit I have for a EF6 of AU6/8 is compatible with my EF8, I have a stage 2 shiftkit that has 18 ohms and 21 ohms, but I can't seem to find the 1 or 5.6 on any other wire combination, and there's only 3 wires coming out of the box.
also are the pin 7 and 29 you mention the pins on the TCM. |
anyone?, such a long thread and I can't find what I need  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
smo el
Fordmods Parts Gopher
Age:22
Posts: 53
Joined: 07 Sep 2006
Location: melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Fri Dec 14, 2007 7:44 am Post subject: |
|
|
| pin 7 and 29 are from the TCM, but i'm not 100% what resistor goes with what pin. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
speedwayR31
Fordmods Oompa Loompa
Age:58
Posts: 25
Joined: 23 Sep 2007
Location: Kingaroy QLD, Australia
View User Gallery (0)
|
| Posted: Sun Dec 30, 2007 11:12 pm Post subject: |
|
|
| neds fantastic simple diagram of the shift kit even an old f@rt like me (57) can understand can you tell me if the au has the same numberd pins as the e series ecu===job well done=== |
|
| Back to top |
|
|
|
|
|
|
|
|
|
znipa-x
Fordmods - Getting Side Ways
Age:34
Posts: 568
Joined: 15 Jan 2005
Location: Sale VIC, Australia
View User Gallery (2)
|
| Posted: Sat Jan 05, 2008 4:46 pm Post subject: |
|
|
| mines in finally, 2 stage, and it works a treat, very postive gear changes, and not for the faint hearted with a lead foot, if anyone needs the wire colours, pin orientation and resistors I used for EF V8 (the one with the TCM) let me know. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
danc666
Fordmods Newbie
Age:26
Posts: 1
Joined: 04 Mar 2005
Location: Tahmoor NSW, Australia
View User Gallery (0)
|
| Posted: Thu Jan 17, 2008 6:59 pm Post subject: |
|
|
| Has anyone done this for a ba??? can you tel me which pins to use please? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
moodyblues
Fordmods Newbie
Age:43
Posts: 13
Joined: 23 Jan 2007
Location: melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Sat Feb 02, 2008 9:24 am Post subject: kit |
|
|
ey silly question is this the same for EB (series 2 fairmont)?
and does any one no wat colour the 2 wires are that come from the respective pins as i couldnt see number any where!!!
Thanks |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Paulmac
Fordmods - Getting Side Ways
Age:61
Posts: 637
Joined: 24 Sep 2007
Location: Central Coast NSW, Australia
View User Gallery (10)
|
| Posted: Mon Feb 04, 2008 2:44 am Post subject: |
|
|
Mal,
Just a suggestion, read through the thread until you find someone with an EB2-ED that's done it. Click on the 'PM' button in that post and ask them directly.
Cheers,
Paul |
|
| Back to top |
|
|
|
|
|
|
|
|
|
moodyblues
Fordmods Newbie
Age:43
Posts: 13
Joined: 23 Jan 2007
Location: melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Mon Feb 04, 2008 5:22 pm Post subject: |
|
|
| Yeah i know i tried to read thru it as much as i could and could only find one instance where i believe even the person with the car and EB mont ser.1 wasnt sure wat was going on with his car TCM and such. if there is any one here who has done it to the EB ser.2 any help would be much appreciated@! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Paulmac
Fordmods - Getting Side Ways
Age:61
Posts: 637
Joined: 24 Sep 2007
Location: Central Coast NSW, Australia
View User Gallery (10)
|
| Posted: Mon Feb 04, 2008 5:44 pm Post subject: |
|
|
PM 'BenJ', he may be able to help you out, use the search button up the top.
Paul |
|
| Back to top |
|
|
|
|
|
|
|
|
|
xfpaul
Fordmods Stock as a Rock
Age:45
Posts: 133
Joined: 12 Jun 2005
Location: hobart TAS, Australia
View User Gallery (0)
|
| Posted: Thu Feb 07, 2008 7:07 am Post subject: |
|
|
| any problems after the mod , please report even the smallest ???? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
BenJ
Cruise Moderator
Posts: 1536
Joined: 20 May 2005
Location: Seven Hills, Sydney NSW, Australia
View User Gallery (11)
|
| Posted: Thu Feb 07, 2008 3:41 pm Post subject: |
|
|
I broke an Engine Mount under full throttle first to second. Chirped the wheels nicely.
BenJ |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Paulmac
Fordmods - Getting Side Ways
Age:61
Posts: 637
Joined: 24 Sep 2007
Location: Central Coast NSW, Australia
View User Gallery (10)
|
| Posted: Thu Feb 07, 2008 6:15 pm Post subject: |
|
|
Ben, Ben...with a 400k klms engine, that's not a problem....that's bragging!!!!
Paul |
|
| Back to top |
|
|
|
|
|
|
|
|
|
syko4d
Fordmods Parts Gopher
Age:27
Posts: 66
Joined: 06 Nov 2007
Location: orange NSW, Australia
View User Gallery (1)
|
| Posted: Sat Feb 16, 2008 4:07 pm Post subject: |
|
|
ok i just built eeryhing for my eb series 2 and i dont have a 38 pin its empty?
has anyone done this to a eb series 2 what pin did you use?
and yes its the 4 speed btr
i have pin 57 but no 38? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Paulmac
Fordmods - Getting Side Ways
Age:61
Posts: 637
Joined: 24 Sep 2007
Location: Central Coast NSW, Australia
View User Gallery (10)
|
| Posted: Sat Feb 16, 2008 4:17 pm Post subject: |
|
|
syko4d,
PM 'BenJ', 2 posts above and click on the pm button. Ben's becoming the EB guru on these things and will probably help you.
Paul |
|
| Back to top |
|
|
|
|
|
|
|
|
|
syko4d
Fordmods Parts Gopher
Age:27
Posts: 66
Joined: 06 Nov 2007
Location: orange NSW, Australia
View User Gallery (1)
|
| Posted: Sat Feb 16, 2008 4:48 pm Post subject: |
|
|
| yeah i did that thanx mate |
|
| Back to top |
|
|
|
|
|
|
|
|
|
AU99
Fordmods - Getting Side Ways
Age:56
Posts: 504
Joined: 06 Jul 2006
Location: Craigmore SA, Australia
View User Gallery (6)
|
| Posted: Sat Feb 16, 2008 5:07 pm Post subject: |
|
|
| speedwayR31 wrote: | | neds fantastic simple diagram of the shift kit even an old f@rt like me (57) can understand can you tell me if the au has the same numberd pins as the e series ecu===job well done=== |
wire up same as EF, hope that helps |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Paulmac
Fordmods - Getting Side Ways
Age:61
Posts: 637
Joined: 24 Sep 2007
Location: Central Coast NSW, Australia
View User Gallery (10)
|
| Posted: Tue Feb 19, 2008 12:36 am Post subject: |
|
|
The pin numbers used for the EB-ED shift kit seem to be hard to find in this long thread, so I'll post this up to make them easier to find:
The 18 ohm resistor wire goes to pin 57
The 5.6 ohm resistor wire goes to pin 38
You can use a 20ohm resistor instead of the 18ohm to achieve a less harsh but still quick, change.
Cheers,
Paul |
|
| Back to top |
|
|
|
|
|
|
|
|
|
BenJ
Cruise Moderator
Posts: 1536
Joined: 20 May 2005
Location: Seven Hills, Sydney NSW, Australia
View User Gallery (11)
|
| Posted: Tue Feb 19, 2008 12:52 am Post subject: |
|
|
Small correction there Sir
The second resistor, is not 5.6ohms (which is for EF six only) it is 1.0ohm for the others, six cylinder only. V8s and EAs with separate TCM are different again.
BenJ |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Paulmac
Fordmods - Getting Side Ways
Age:61
Posts: 637
Joined: 24 Sep 2007
Location: Central Coast NSW, Australia
View User Gallery (10)
|
| Posted: Tue Feb 19, 2008 1:04 am Post subject: |
|
|
Well done Ben, 16 mins for the correction! I win the bet by 4 minutes, I knew you'd pick it up in under 20mins!
I did mean to type the one ohm but I was laughing so much I screwed up and just as I was going to try to edit it your post caught me out.
So now I'm laughing even more... you see there were two dudes fitting a BBM and...oh well wrong thread, another time perhaps?
Cheers,
Paul |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
| (c)2002-2008 Matti Jones and Brad Evans |
[47 queries :: 0.05497 seconds ]
|
|
