 |
|
|
|
|
|
|
|
|
|
renocasino
Fordmods Newbie
Age:57
Posts: 7
Joined: 23 Mar 2008
Location: MELTON VIC, Australia
View User Gallery (0)
|
 Posted: Mon Apr 14, 2008 4:09 am Post subject: What are the BEST GAS Leads money can buy |
 |
|
HI guys I will just make this very short
Looking for the BEST LPG Leads .
Getting new Gas system fitted to my Ford AU 2 Don,t want any problems
With Back Fire .. or Replacing them .. cause they are not easy to get to
Read about problems with Bosch and some others .
Iam now completely Confused 
any Help would be GREAT
Thanks RENO |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Brett3158
Fordmods Tyre Shredder
Posts: 372
Joined: 08 Jun 2006
Location: melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Mon Apr 14, 2008 1:34 pm Post subject: |
|
|
| My conversion on Eb included ICE lpg leads. These are not cheap so for Lakeside to fit these they must be good. Other people have recomended them also. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
renocasino
Fordmods Newbie
Age:57
Posts: 7
Joined: 23 Mar 2008
Location: MELTON VIC, Australia
View User Gallery (0)
|
| Posted: Tue Apr 15, 2008 1:14 am Post subject: |
|
|
| Sounds Good to me Thanks Brett |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Rick's EF Fairmont Wagon
Fordmods - Getting Side Ways
Age:38
Posts: 444
Joined: 07 Sep 2007
Location: Brookfield VIC, Australia
View User Gallery (3)
|
| Posted: Tue Apr 15, 2008 5:45 am Post subject: |
|
|
| I replaced mine a few years ago, just the top gun gas leads and much fewer backfires since. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
twason
Fordmods - Getting Side Ways
Posts: 2008
Joined: 06 Nov 2004
Location: Canberra - The Nations Capital ACT, Australia
View User Gallery (9)
|
| Posted: Tue Apr 15, 2008 6:54 am Post subject: |
|
|
| Rick's EF Fairmont Wagon wrote: | | I replaced mine a few years ago, just the top gun gas leads and much fewer backfires since. |
Top Gun have a reputation for ends falling off or connections failing, not good for LPG. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
creeture3
Fordmods Tyre Shredder
Posts: 336
Joined: 15 Nov 2004
Location: melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Thu Apr 17, 2008 4:32 pm Post subject: |
|
|
as far a I am concerned, THE best gas leads are made by AMR in Oakleigh. They are stainless steel wound, and offer almost ZERO resistance per meter.
I have put them on two cars so far, and idle has improved, and starting.
The best thing is that they are actualy MADE IN AUSSIE!! 
They are a bit more expensive than other leads, but well worth the money |
|
| Back to top |
|
|
|
|
|
|
|
|
|
banarcus
Fordmods - Getting Side Ways
Age:34
Posts: 404
Joined: 29 Nov 2004
Location: Kurri Kurri NSW, Australia
View User Gallery (15)
|
| Posted: Thu Apr 17, 2008 5:22 pm Post subject: |
|
|
| I've got you beaut 8mm AUTO ONE brand which are made by Top Gun on my V8. Never had any issues with them on gas or petrol. About $45 for a set for a 5.0L. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
xcabbi
Fordmods - Getting Side Ways
Age:26
Posts: 6236
Joined: 09 Nov 2004
Location: Wollongong NSW, Australia
View User Gallery (0)
|
| Posted: Fri Apr 25, 2008 11:17 am Post subject: |
|
|
| I just use the stock Motorcraft leads. Never had any dramas. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
twason
Fordmods - Getting Side Ways
Posts: 2008
Joined: 06 Nov 2004
Location: Canberra - The Nations Capital ACT, Australia
View User Gallery (9)
|
| Posted: Fri Apr 25, 2008 3:04 pm Post subject: |
|
|
| twason wrote: | | Rick's EF Fairmont Wagon wrote: | | I replaced mine a few years ago, just the top gun gas leads and much fewer backfires since. |
Top Gun have a reputation for ends falling off or connections failing, not good for LPG. |
Well I now have TOP GUN's on mine..... The bosch ones I have had on for a few years finally started backfiring so I tried all outlets I could and the only ones I could get were Top Guns. When I enquired about them the guy agreed that the boxed sets have a problem and they are no longer stocking them but had a behind the counter trade pack of leads that are made by TOP GUN but are not labled..
Time will tell. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
ge2589
Fordmods Tyre Shredder
Age:19
Posts: 364
Joined: 07 Oct 2007
Location: Cairns QLD, Australia
View User Gallery (14)
|
| Posted: Fri Apr 25, 2008 4:13 pm Post subject: |
|
|
| i had to replace mine i now have bosch motor sport spark leads haven't had any problems engine is working better |
|
| Back to top |
|
|
|
|
|
|
|
|
|
ixlrate
Fordmods - Getting Side Ways
Age:44
Posts: 504
Joined: 14 Mar 2005
Location: adelaide SA, Australia
View User Gallery (14)
|
| Posted: Fri Apr 25, 2008 4:26 pm Post subject: |
|
|
| i've had a mega gas aust.system installed on my au3 never changed the leads but was told by the installer its very important to run gas plugs,i've never had a problem,i only change from petrol to gas and viceverser when the cars stationary,but using gas leads would be good insurance. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
AUTOGASSYSTEMS
Fordmods Newbie
Age:48
Posts: 7
Joined: 10 May 2008
Location: Brisbane QLD, Australia
View User Gallery (0)
|
| Posted: Sun May 11, 2008 7:26 am Post subject: Best LPG Ignition Leads |
|
|
ICE seem to have a great name & a lot of guys use them with a non resistor plug as recemended by ICE .
AMR Make Gasmaster Leads & they have a long term great name
QLD Ignition leads are great but carry little stock , however they can make to order whatever you want in a range of types & colours .
Thought Bosch were ok , then found on one of our cars the leads showed evidence of crossfiring after just three months !!!!
If you need em fast Repco have Champion LPG leads that will sort out most .
Hmmm but then if the old leads were so bad they overloaded the coil pack , sorry more $$$$$$
AUTOGAS SYSTEMS |
|
| Back to top |
|
|
|
|
|
|
|
|
|
TURBOTAXI
Fordmods Parts Gopher
Posts: 51
Joined: 19 Mar 2006
Location: Dubbo NSW, Australia
View User Gallery (0)
|
| Posted: Sat May 17, 2008 3:13 pm Post subject: |
|
|
Yeah I have gone off the bosch product.
I tried to get them to replace a set that lasted only 20,000 k's and they would not. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
[JETEB6]
Fordmods Oompa Loompa
Age:20
Posts: 31
Joined: 11 Feb 2008
Location: Melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Sat May 17, 2008 3:30 pm Post subject: |
|
|
| Brett3158 wrote: | | My conversion on Eb included ICE lpg leads. These are not cheap so for Lakeside to fit these they must be good. Other people have recomended them also. |
Right on the mark i know shane and richy well down at lakeside they also did my car. I also had Micheal from ICE at trade school for an ignitions sytems lecture. ICE are the way to go! 8mm and also make sure you get a set of non resistor plugs due to the combustion level of gas being a lot harder to reach than regular petrol. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
NCIILANE
Fordmods - Getting Side Ways
Age:35
Posts: 932
Joined: 21 Oct 2007
Location: Somewhere in Newie NSW, Australia
View User Gallery (28)
|
| Posted: Sat May 17, 2008 4:58 pm Post subject: |
|
|
Does anybody know who the distributors of the ICE leads are for NSW. I found the website for ICE ignitions, http://www.iceignition.com.au/BODY.htm, but there is no contact info or any other way to request more info on the website
I too have been having a few backfire issues and I think it's time to replace the old 8mm top guns I'm currently running.
The ICE seem to be the way to go, but I can't seem to find where you can get them.
Cheers, Mick |
|
| Back to top |
|
|
|
|
|
|
|
|
|
[JETEB6]
Fordmods Oompa Loompa
Age:20
Posts: 31
Joined: 11 Feb 2008
Location: Melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Sun May 18, 2008 5:57 pm Post subject: |
|
|
I'm sure if you call ice (9532 6000) here in melbourne they can tell you as this question was actually raised to how accessable the product is and michael answered with an insane amount of outlets sorry i wasnt listening harder!!  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
LTDHO
Fordmods - Getting Side Ways
Age:33
Posts: 521
Joined: 05 Nov 2004
Location: South eastern VIC, Australia
View User Gallery (4)
|
| Posted: Mon May 19, 2008 8:40 am Post subject: |
|
|
I have Bosch leads on the XR8. I put them on 10,000 klms ago when the LPG was fitted. After 5000klms I checked the plugs and one of the leads fell apart.
I have never heard of AMR? Anyone got details.
Previously I have run ICE leads without issues. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
NCIILANE
Fordmods - Getting Side Ways
Age:35
Posts: 932
Joined: 21 Oct 2007
Location: Somewhere in Newie NSW, Australia
View User Gallery (28)
|
| Posted: Thu May 22, 2008 5:42 pm Post subject: |
|
|
| [JETEB6] wrote: | | I'm sure if you call ice (9532 6000) here in melbourne they can tell you as this question was actually raised to how accessable the product is and michael answered with an insane amount of outlets sorry i wasnt listening harder!! |
Thanks for that JETEB6, I'll have to give them a call as I need a set ASAP.
Last night when driving home from watching the State of Origin at a mates place, the Lane had another backfire. Normally doesn't bother me too much as I have an Occy strap holding down the airbox lid at the moment for just this reason, but last night the bang was so big that the strap let go with such force that it actually put a ding in the bonnet   I didn't notice it until the missus showed me this arvo when I got home from work. Damage done now and i'm not friggin very happy about it. As I try to see the positive in most things, I now have an excuse to get the bonnet resprayed. Paint is in pretty good nick but there are a lot of stone chips and now with a big ding added to the equation, it will be just as easy to get the whole bonnet re-painted.
Don't suppose anybody in Newcastle knows where I can get my hands on a set??? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Mechan1k
Fordmods - Getting Side Ways
Age:31
Posts: 1973
Joined: 08 Mar 2005
Location: East Kurrajong NSW, Australia
View User Gallery (4)
|
| Posted: Tue Jun 17, 2008 11:44 pm Post subject: |
|
|
| I run 9mm QLD Ignition Leads in the work ute ... I am on my 2nd set now ... first set I got 120,000km from them ... will see how we go with this set ... so far I have had them in for 60,000km. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
MadMatt
Cruise Moderator
Age:36
Posts: 1068
Joined: 01 Feb 2006
Location: Greenacres/Adelaide SA, Australia
View User Gallery (25)
|
| Posted: Wed Jun 18, 2008 12:24 am Post subject: |
|
|
| My top guns have been on my EF for 60 odd k with out missing a beat, rather happy with them. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
