 |
|
|
|
|
|
|
|
|
|
|
kiwi in oz
Fordmods Parts Gopher
Age:49
Posts: 64
Joined: 15 Apr 2005
Location: Riyadh QLD, Australia
View User Gallery (0)
|
 Posted: Sun May 11, 2008 3:12 pm Post subject: Elec window motor |
 |
|
My El Fairmont drivers window motor assy has packed up.
I,m thinking of replacing it myself, instead of paying $300 to someone.
Is it very hard to swap out the unit?
How long to do it? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
TheBArocks!!
Fordmods Newbie
Age:27
Posts: 15
Joined: 03 May 2008
Location: Melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Sun May 11, 2008 3:42 pm Post subject: |
|
|
All you have to do is remove the door trim, drill out the rivets for the power window motor, disconnect the wiring and unbolt the power window runner from the bottom edge of the glass. Pull the power window motor assembly out from the bottom of the door.
Feed the new motor and assembly in the door, bolt it to the door and bolt it on to the glass. Wire it up and see how you go - adjust if necessary.
$300 to repalr - can be done for under $200 on your own, shouldn't take more than half an hour. Some mechanics in Melbourne can do it for under $200. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
robsea80
Fordmods - Getting Side Ways
Age:28
Posts: 501
Joined: 19 Nov 2005
Location: cranbourne VIC, Australia
View User Gallery (8)
|
| Posted: Sun May 11, 2008 4:24 pm Post subject: |
|
|
| ive done all mine on my el it easy too thirs a docco thir with how to do it thats what i used. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Krytox
Technical Contributor
Age:29
Posts: 2476
Joined: 20 Mar 2005
Location: Seaford State: VIC, Australia
View User Gallery (2)
|
| Posted: Sun May 11, 2008 4:43 pm Post subject: |
|
|
| For $200 you can do all four yourself. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
nicco
Fordmods - Getting Side Ways
Age:21
Posts: 2453
Joined: 08 Nov 2004
Location: Townsville/Cairns QLD, Australia
View User Gallery (6)
|
| Posted: Tue May 13, 2008 2:00 pm Post subject: |
|
|
| TheBArocks!! wrote: | All you have to do is remove the door trim, drill out the rivets for the power window motor, disconnect the wiring and unbolt the power window runner from the bottom edge of the glass. Pull the power window motor assembly out from the bottom of the door.
Feed the new motor and assembly in the door, bolt it to the door and bolt it on to the glass. Wire it up and see how you go - adjust if necessary.
$300 to repalr - can be done for under $200 on your own, shouldn't take more than half an hour. Some mechanics in Melbourne can do it for under $200. |
thats spot on, but beware, the rivets that you have to drill out arent rivets, they are monobolts, and are right royal C*** to get out! do a search for my power windows thread and there is a bunch of suggestions on how to get them out.
the rest of te job will take you under 3 minutes!  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
| (c)2002-2008 Matti Jones and Brad Evans |
[32 queries :: 0.03338 seconds ]
|
|
