 |
|
|
|
|
|
|
|
|
|
EACRUISER
Fordmods - Smokin em up
Age:24
Posts: 293
Joined: 12 Nov 2004
Location: Adelaide SA, Australia
View User Gallery (20)
|
 Posted: Sun May 11, 2008 6:14 pm Post subject: FORD 5.0LT REVVING PROBLEMS |
 |
|
HELP PLEASE....
EB XR8 motor and ecu.
Hoping this has happened to someone on the forums, car revs but starts to cut out and sputter over 3,000rpm.
Accelerates but not that well, sputters and coughs above 3,000.
like its hitting a revlimiter or something similar.
any ideas,
Just adjusted the TPS as it was showing 1.4v at idle.
Any ideas with what i should check |
|
| Back to top |
|
|
|
|
|
|
|
|
|
DARTHVADER
Fordmods Oompa Loompa
Donating Member
Age:30
Posts: 38
Joined: 04 Nov 2007
Location: COONABARABRAN NSW, Australia
View User Gallery (1)
|
| Posted: Sun May 11, 2008 6:32 pm Post subject: |
|
|
| fuel filter maybe!!! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
hans hartman
Fordmods - Getting Side Ways
Age:57
Posts: 1095
Joined: 18 Mar 2006
Location: wollongong NSW, Australia
View User Gallery (0)
|
| Posted: Sun May 11, 2008 6:46 pm Post subject: |
|
|
| and the pump,pressure \volume,pressure relief valve |
|
| Back to top |
|
|
|
|
|
|
|
|
|
TerroristGHIA
Fordmods - Getting Side Ways
Age:36
Posts: 2234
Joined: 25 Nov 2004
Location: Sydney Australia NSW, Australia
View User Gallery (9)
|
| Posted: Sun May 11, 2008 6:50 pm Post subject: |
|
|
Filter, pump, and TFI module, they would be my first point of call
Brett |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Scaffy
Fordmods - Getting Side Ways
Age:30
Posts: 965
Joined: 26 Nov 2006
Location: Perth WA, Australia
View User Gallery (7)
|
| Posted: Sun May 11, 2008 6:53 pm Post subject: |
|
|
| Also add plugs and leads to the checklist... |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EACRUISER
Fordmods - Smokin em up
Age:24
Posts: 293
Joined: 12 Nov 2004
Location: Adelaide SA, Australia
View User Gallery (20)
|
| Posted: Sun May 11, 2008 8:25 pm Post subject: |
|
|
OK WILL TRY THOSE,
Thanks Timmeh, adjusted it to that. with the guide to tuning the 5.0 in the forums. Hoped that would fix it but still doign it.
Will check the filter etc...
Still able to drive just have to keep the revs low and only a lil bit of throttle. can't go full throttle as it just doesnt want to go anywhere.
do you think it could be a stuffed maf, checked it and the wires look clean & good so yeah????? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
TerroristGHIA
Fordmods - Getting Side Ways
Age:36
Posts: 2234
Joined: 25 Nov 2004
Location: Sydney Australia NSW, Australia
View User Gallery (9)
|
| Posted: Sun May 11, 2008 8:54 pm Post subject: |
|
|
Unplug MAF, see if there is any difference. Without MAF it will be a slug down low, due to little if any timing advance
Brett |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Alex_01
Fordmods Oompa Loompa
Age:21
Posts: 42
Joined: 08 May 2008
Location: Sydney NSW, Australia
View User Gallery (0)
|
| Posted: Tue May 13, 2008 12:35 pm Post subject: |
|
|
| Mine cuts out at about 3000rpm aswell, but doesnt splatter as you said, it just accelerates a lot slower, and then it will kick back in again.. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
