 |
|
|
|
|
|
|
|
|
|
Froudey
Fordmods - Getting Side Ways
Age:24
Posts: 3709
Joined: 13 Mar 2006
Location: Dubbo NSW, Australia
View User Gallery (10)
|
 Posted: Wed Apr 16, 2008 2:02 pm Post subject: A decent Launch / Take off |
 |
|
I have a limp take off seems to lack ommph. when i take off from a standing start....
At the moment my car is an EB 3.9 = AU injectors = XH Air Intake = Genie SVO extractors = 2.5 Exhaust System = 5 Speed
that is it it seems like it revs and i ride the clutch (i don't ride the clutch etc etc) would a worn old clutch plate or pressure plate etc etc limit the release.... |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Shortshift
Fordmods Stock as a Rock
Age:45
Posts: 104
Joined: 12 Aug 2007
Location: Melbourne VIC, Australia
View User Gallery (1)
|
| Posted: Wed Apr 16, 2008 3:35 pm Post subject: |
|
|
Initially, it seems like your pressure plate is worn out.
How long since the clutch was replaced?
Is the clutch cable sticking because it's kinked, frayed or needs some lube?
Is the pedal box cracked and limiting the clutch pedal movement? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Froudey
Fordmods - Getting Side Ways
Age:24
Posts: 3709
Joined: 13 Mar 2006
Location: Dubbo NSW, Australia
View User Gallery (10)
|
| Posted: Wed Apr 16, 2008 6:30 pm Post subject: |
|
|
| Shortshift wrote: | Initially, it seems like your pressure plate is worn out.
How long since the clutch was replaced?
Is the clutch cable sticking because it's kinked, frayed or needs some lube?
Is the pedal box cracked and limiting the clutch pedal movement? |
2nd Hand Clutch...... Seems like it had a fair amount of meat
Clutch Cable........... Seems ok don't feel it doing anything weird
Pedal Box............... This might be a factor cause it is just a bolt holding my pedal onto the auto box (t5 conversion) was acting wierd so got an 8mm think plate and bolted that with the bolt ( have a dodgy looking manual pedal box waiting to go in(when i have time)) |
|
| Back to top |
|
|
|
|
|
|
|
|
|
HiBoost
Fordmods Stock as a Rock
Age:21
Posts: 174
Joined: 02 Jun 2005
Location: melbourn VIC, Australia
View User Gallery (0)
|
| Posted: Thu Apr 17, 2008 12:08 pm Post subject: Re: A decent Launch / Take off |
|
|
| Froudey wrote: | I have a limp take off seems to lack ommph. when i take off from a standing start....
At the moment my car is an EB 3.9 = AU injectors = XH Air Intake = Genie SVO extractors = 2.5 Exhaust System = 5 Speed
that is it it seems like it revs and i ride the clutch (i don't ride the clutch etc etc) would a worn old clutch plate or pressure plate etc etc limit the release.... |
why have u got AU Injectors? do u have some sort of a chip in the ecu?no ecu it could be the AU inectors which are fludding the cylinder low down RPM which kills the low down power(engine struggles to purn the extra fuel) and thats why u have crap take off. put the std injectors back in and ull c the difference... |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Froudey
Fordmods - Getting Side Ways
Age:24
Posts: 3709
Joined: 13 Mar 2006
Location: Dubbo NSW, Australia
View User Gallery (10)
|
| Posted: Thu Apr 17, 2008 6:30 pm Post subject: Re: A decent Launch / Take off |
|
|
| HiBoost wrote: | | Froudey wrote: | I have a limp take off seems to lack ommph. when i take off from a standing start....
At the moment my car is an EB 3.9 = AU injectors = XH Air Intake = Genie SVO extractors = 2.5 Exhaust System = 5 Speed
that is it it seems like it revs and i ride the clutch (i don't ride the clutch etc etc) would a worn old clutch plate or pressure plate etc etc limit the release.... |
why have u got AU Injectors? do u have some sort of a chip in the ecu?no ecu it could be the AU inectors which are fludding the cylinder low down RPM which kills the low down power(engine struggles to purn the extra fuel) and thats why u have crap take off. put the std injectors back in and ull c the difference... |
Cause i can ...... lol
No this scenero happened prior to au injectors |
|
| Back to top |
|
|
|
|
|
|
|
|
|
phatba
Fordmods Tyre Shredder
Age:28
Posts: 301
Joined: 30 Sep 2007
Location: perth WA, Australia
View User Gallery (0)
|
| Posted: Thu Apr 17, 2008 10:19 pm Post subject: |
|
|
| eb 3.9 litre? i thought only early ea's were 3.9 and then they went to 4 litre.... |
|
| Back to top |
|
|
|
|
|
|
|
|
|
phongus
Fordmods Junkie
Age:23
Posts: 8654
Joined: 17 May 2005
Location: Melbourne VIC, Australia
View User Gallery (11)
|
| Posted: Thu Apr 17, 2008 10:32 pm Post subject: |
|
|
Check your clutch fork isn't bent as well.
phong =P~ |
|
| Back to top |
|
|
|
|
|
|
|
|
|
alfy
Fordmods - Getting Side Ways
Age:19
Posts: 4071
Joined: 02 Mar 2006
Location: Port Lincoln SA, Australia
View User Gallery (5)
|
| Posted: Thu Apr 17, 2008 10:51 pm Post subject: |
|
|
| phatba wrote: | | eb 3.9 litre? i thought only early ea's were 3.9 and then they went to 4 litre.... |
4 litre was introduced with the EB2.
EB1 and all EA's had 3.9. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Froudey
Fordmods - Getting Side Ways
Age:24
Posts: 3709
Joined: 13 Mar 2006
Location: Dubbo NSW, Australia
View User Gallery (10)
|
| Posted: Fri Apr 18, 2008 8:52 pm Post subject: |
|
|
| phongus wrote: | Check your clutch fork isn't bent as well.
phong =P~ |
hmm okay will have a look tomorrow when i replace my handbrake cable... so will it be bent or slightly disformed what should i look at |
|
| Back to top |
|
|
|
|
|
|
|
|
|
phongus
Fordmods Junkie
Age:23
Posts: 8654
Joined: 17 May 2005
Location: Melbourne VIC, Australia
View User Gallery (11)
|
| Posted: Fri Apr 18, 2008 10:07 pm Post subject: |
|
|
| Froudey wrote: | | phongus wrote: | Check your clutch fork isn't bent as well.
phong =P~ |
hmm okay will have a look tomorrow when i replace my handbrake cable... so will it be bent or slightly disformed what should i look at |
You could see if the rubber dampener on the end of it is in good nick as well as looking for warpage or something.
phong =P~ |
|
| Back to top |
|
|
|
|
|
|
|
|
|
02tonna
Fordmods Parts Gopher
Age:22
Posts: 75
Joined: 06 Nov 2007
Location: Perth WA, Australia
View User Gallery (4)
|
| Posted: Sun May 18, 2008 11:39 am Post subject: |
|
|
| just sell it and buy a ba or atleast a 4.0L EB |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Froudey
Fordmods - Getting Side Ways
Age:24
Posts: 3709
Joined: 13 Mar 2006
Location: Dubbo NSW, Australia
View User Gallery (10)
|
| Posted: Sun May 18, 2008 6:36 pm Post subject: |
|
|
| 02tonna wrote: | | just sell it and buy a ba or atleast a 4.0L EB |
wtf this a old topic i have since fixed it... it was human related... |
|
| Back to top |
|
|
|
|
|
|
|
|
|
phongus
Fordmods Junkie
Age:23
Posts: 8654
Joined: 17 May 2005
Location: Melbourne VIC, Australia
View User Gallery (11)
|
| Posted: Sun May 18, 2008 6:40 pm Post subject: |
|
|
| 02tonna wrote: | | just sell it and buy a ba or atleast a 4.0L EB |
That wouldn't have helped his problem in launching his 3.9L...
phong =P~ |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Punnisher_42
Fordmods - Getting Side Ways
Age:25
Posts: 718
Joined: 10 Nov 2004
Location: Tingalpa QLD, Australia
View User Gallery (24)
|
| Posted: Sun May 18, 2008 6:47 pm Post subject: |
|
|
| 02tonna wrote: | | just sell it and buy a ba or atleast a 4.0L EB |
where do we find these wankas???
god that pisses me!!
it was an old topic but he still had to bring it back to he could prove he was a knob!!!!! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
02tonna
Fordmods Parts Gopher
Age:22
Posts: 75
Joined: 06 Nov 2007
Location: Perth WA, Australia
View User Gallery (4)
|
| Posted: Sun May 18, 2008 9:04 pm Post subject: |
|
|
| rack off. its a well known fact that the 3.9L was the crappest motor ford produced. i should know i had a eb 3.9L. what im sayin is if you want a better take off get a 4.0L.. note the 2 guys that cracked it both own crappy 3.9L's. maybe this is the reason there ragging because of what i said. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
krisisdog
Fordmods - Getting Side Ways
Age:19
Posts: 1739
Joined: 30 Oct 2006
Location: Grafton NSW, Australia
View User Gallery (5)
|
| Posted: Sun May 18, 2008 9:17 pm Post subject: |
|
|
| I think the 3 litre version would be crapper than the 3.9, champ. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
02tonna
Fordmods Parts Gopher
Age:22
Posts: 75
Joined: 06 Nov 2007
Location: Perth WA, Australia
View User Gallery (4)
|
| Posted: Sun May 18, 2008 9:23 pm Post subject: |
|
|
| krisisdog wrote: | | I think the 3 litre version would be crapper than the 3.9, champ. |
what falcon had the 3L?? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
krisisdog
Fordmods - Getting Side Ways
Age:19
Posts: 1739
Joined: 30 Oct 2006
Location: Grafton NSW, Australia
View User Gallery (5)
|
| Posted: Sun May 18, 2008 9:24 pm Post subject: |
|
|
| EAs could have a 3.2L. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
needfordspeed
Fordmods - Getting Side Ways
Age:20
Posts: 438
Joined: 16 Feb 2005
Location: Melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Sun May 18, 2008 9:24 pm Post subject: |
|
|
| I think he was meaning 3.2L |
|
| Back to top |
|
|
|
|
|
|
|
|
|
phongus
Fordmods Junkie
Age:23
Posts: 8654
Joined: 17 May 2005
Location: Melbourne VIC, Australia
View User Gallery (11)
|
| Posted: Sun May 18, 2008 9:25 pm Post subject: |
|
|
| 02tonna wrote: | | rack off. its a well known fact that the 3.9L was the crappest motor ford produced. i should know i had a eb 3.9L. what im sayin is if you want a better take off get a 4.0L.. note the 2 guys that cracked it both own crappy 3.9L's. maybe this is the reason there ragging because of what i said. |
| Froudey wrote: | | 02tonna wrote: | | just sell it and buy a ba or atleast a 4.0L EB |
wtf this a old topic i have since fixed it... it was human related... |
As you can see, he said it was a human related issue. I believe the 3.9L was the better engine out of the 3.2L and 4.1L from the previous models. Not to mention the 4.0L was probably came about due to the 3.9L.
Anyways topic is over now since the problem had been solved.
phong =P~ |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
