 |
|
|
|
|
|
|
|
|
|
|
boehm
Fordmods Newbie
Posts: 17
Joined: 09 Feb 2008
Location: Brisbane QLD, Australia
View User Gallery (0)
|
 Posted: Sun Jun 08, 2008 5:53 pm Post subject: Wiring Tweeters in Dash |
 |
|
Okay, so ive chosen to put my tweeters in the dash (almost factory position) however i am really unsure how to wire them to the cross over?
Any ideas?
Thanks |
|
| Back to top |
|
|
|
|
|
|
|
|
|
outlawxr6
Fordmods - Getting Side Ways
Age:36
Posts: 518
Joined: 20 Nov 2004
Location: Brisbane QLD, Australia
View User Gallery (0)
|
| Posted: Mon Jun 09, 2008 5:45 pm Post subject: |
|
|
What are you asking? How to connect the tweeters to the crossover or how to get the wiring to the tweeters?
The factory locations are a pretty poor option really for decent sound quality as the drivers side will dominate and the passenger side will be almost inaudible, plus with the treble reflecting off the glass makes it harsh...... |
|
| Back to top |
|
|
|
|
|
|
|
|
|
boehm
Fordmods Newbie
Posts: 17
Joined: 09 Feb 2008
Location: Brisbane QLD, Australia
View User Gallery (0)
|
| Posted: Tue Jun 10, 2008 6:46 pm Post subject: |
|
|
Okay cool,
I'll put the splits in the triangle frame thing on the door...
that way i can put the crossover in the door, then splice into the factory wire, then run the wire that goes into the head unit to the amp...I'm assuming that will all work out?
Has anyone done anything different to this? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
joolz
Fordmods - Getting Side Ways
Age:34
Posts: 2456
Joined: 06 Nov 2004
Location: Melbourne VIC, Australia
View User Gallery (11)
|
| Posted: Wed Jun 11, 2008 12:02 am Post subject: |
|
|
| Have a pic in my gallery with tweeters mounted in the doors. I bit more work but imo look better. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
outlawxr6
Fordmods - Getting Side Ways
Age:36
Posts: 518
Joined: 20 Nov 2004
Location: Brisbane QLD, Australia
View User Gallery (0)
|
| Posted: Sun Jun 15, 2008 12:17 am Post subject: |
|
|
| boehm wrote: | Okay cool,
I'll put the splits in the triangle frame thing on the door...
that way i can put the crossover in the door, then splice into the factory wire, then run the wire that goes into the head unit to the amp...I'm assuming that will all work out?
Has anyone done anything different to this? |
Yeah, that will work.... |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
| (c)2002-2008 Matti Jones and Brad Evans |
[32 queries :: 0.02718 seconds ]
|
|
