 |
|
|
|
|
|
|
|
|
|
|
Lukeyson
Fordmods - Getting Side Ways
Posts: 882
Joined: 07 Nov 2005
Location: Newcastle NSW, Australia
View User Gallery (0)
|
 Posted: Thu Jun 19, 2008 9:26 pm Post subject: BA - Wheel Diameter/Cruise settings after Custom Flash Tune? |
 |
|
Does anyone know if the SCT Flash Boxes (CAPA/Herrod/BPT etc) re-write the Wheel/Axle or Cruise settings in the PCM? Or do these values get left unchanged when the custom tune goes in?
I may be able to answer this myself at some point through some of my own testing, but was wondering if anyone already knew the answer to this.
Lukeyson |
|
| Back to top |
|
|
|
|
|
|
|
|
|
data_mine
Technical Contributor
Age:27
Posts: 4732
Joined: 24 Nov 2004
Location: Canberra ACT, Australia
View User Gallery (0)
|
| Posted: Thu Jun 19, 2008 11:08 pm Post subject: |
|
|
I didn't need a change when I changed diff, everything just worked.
AFAIK, the tuner takes a copy of your original PCM code, and modifies that. So no need for anything to change. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Lukeyson
Fordmods - Getting Side Ways
Posts: 882
Joined: 07 Nov 2005
Location: Newcastle NSW, Australia
View User Gallery (0)
|
| Posted: Fri Jun 20, 2008 8:08 am Post subject: |
|
|
OK, I might have found something relevant.
IN the BF Workshop Manual I found the following text:
NOTE: If the VID is incorrectly programmed it will
cause multiple concerns with systems which interact with the PCM, notable automatic transmission, cruise control, ABS, DSC, incorrect speed display etc
....which implies that the settings I'm after are in the VID and are usually untouched by a custom flash tune.
Which means, I can flash my car back to factory with my CAPA box, use my lab tools to change the cruise/wheel/axle values in the VID, then put my custom tune back in.
Sound plausible?
Lukeyson |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
| (c)2002-2008 Matti Jones and Brad Evans |
[30 queries :: 0.03303 seconds ]
|
|
