 |
|
|
|
|
|
|
|
|
|
rip_ea
Fordmods Oompa Loompa
Posts: 21
Joined: 10 May 2008
Location: sydney NSW, Australia
View User Gallery (0)
|
 Posted: Thu Jun 26, 2008 12:23 pm Post subject: Vernier timing gear or not? |
 |
|
Hi guys
I'm getting my EA camshaft reground and not sure whether I should get the associated vernier timing gear or not.
The cam is crowcams 222002, (i'm after better fuel economy and low end torque) and the timing gear is a crowcams CS6EA-V.
Do I need the new timing gear or can I get away with using the stock gear?
Has anyone had experience with vernier gears?
Cheers
Marc |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Shortshift
Fordmods Stock as a Rock
Age:45
Posts: 115
Joined: 12 Aug 2007
Location: Melbourne VIC, Australia
View User Gallery (1)
|
| Posted: Thu Jun 26, 2008 12:48 pm Post subject: |
|
|
The Crow Cams website mentions dialling in their cams to get the best performance & economy. To do this, you really nead a vernier gear.
If you've had the cylinder head shaved, you should also use one as cam timing will be out. I had 25 thou taken off an EF head and the cam timing was out 2 degrees. The vernier gear fixed this error.
If you want to do the cam installation properly, I suggest you get a vernier gear. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
rip_ea
Fordmods Oompa Loompa
Posts: 21
Joined: 10 May 2008
Location: sydney NSW, Australia
View User Gallery (0)
|
| Posted: Thu Jun 26, 2008 12:58 pm Post subject: |
|
|
| thanx for the info Shortshift |
|
| Back to top |
|
|
|
|
|
|
|
|
|
rip_ea
Fordmods Oompa Loompa
Posts: 21
Joined: 10 May 2008
Location: sydney NSW, Australia
View User Gallery (0)
|
| Posted: Thu Jun 26, 2008 9:01 pm Post subject: |
|
|
I've had a little look around and have found a few different vernier cam gears.
crow cams supplies the one I listed above for $189.20 and rollmaster has one for $110. I think JMM also have one but I haven't found any prices yet.
has anyone used one of the above gears or any other adjustable cam gear? what did you think of it?
Cheers
Marc |
|
| Back to top |
|
|
|
|
|
|
|
|
|
phongus
Fordmods Junkie
Age:23
Posts: 8855
Joined: 17 May 2005
Location: Melbourne VIC, Australia
View User Gallery (11)
|
| Posted: Thu Jun 26, 2008 9:39 pm Post subject: |
|
|
I think the one that Crow Cams supply is actually a Rollermsater one...so you're better off getting the Rollermaster one straight out for $110 rather then having the middle man to charge you an extra $79.20.
Though someone please confirm my statement.
phong =P~ |
|
| Back to top |
|
|
|
|
|
|
|
|
|
sooty72
Fordmods Parts Gopher
Age:36
Posts: 74
Joined: 26 Nov 2007
Location: Brisbane QLD, Australia
View User Gallery (0)
|
| Posted: Fri Jun 27, 2008 7:28 am Post subject: |
|
|
I have the Rollmaster one on my engine, and I am very happy with it. Easily adjusted, and it doesnt work loose like some of the jap 4cyl ones do. Get the Rollmaster one, p/n CS3250.  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
rip_ea
Fordmods Oompa Loompa
Posts: 21
Joined: 10 May 2008
Location: sydney NSW, Australia
View User Gallery (0)
|
| Posted: Fri Jun 27, 2008 6:59 pm Post subject: |
|
|
| sooty72 wrote: | | I have the Rollmaster one on my engine, and I am very happy with it. Easily adjusted, and it doesnt work loose like some of the jap 4cyl ones do. Get the Rollmaster one, p/n CS3250. |
cheers for the feedback mate, the part number you quoted is for the cam gear and chain set. for just the cam gear it's CS3255.
will the rollmaster cam gear work with the standard chain? and is it a good idea to get a new chain anyway, (keeping in mind this chain has probably never been changed)
cheers
marc |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Krytox
Technical Contributor
Age:29
Posts: 2660
Joined: 20 Mar 2005
Location: Seaford State: VIC, Australia
View User Gallery (2)
|
| Posted: Fri Jun 27, 2008 7:15 pm Post subject: |
|
|
chain should outlast the engine, keep in mind,
You'll need to almost remove the sump to change the chain. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
rip_ea
Fordmods Oompa Loompa
Posts: 21
Joined: 10 May 2008
Location: sydney NSW, Australia
View User Gallery (0)
|
| Posted: Fri Jun 27, 2008 7:35 pm Post subject: |
|
|
| hmm in that case i might just stick with getting the single rollmaster cam gear without getting a new chain ( as long as it's compatible). |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
