 |
|
|
|
|
|
|
|
|
|
|
nvk-351
Fordmods Parts Gopher
Posts: 95
Joined: 04 Jun 2007
Location: Melbourne VIC, Australia
View User Gallery (0)
|
 Posted: Sun Jun 29, 2008 2:19 pm Post subject: Ef Manual Pedal box |
 |
|
hey,
Just about to fit a manual pedal box to my ef.. Do you guys have any tips or is there a step by step procedure to do it..
Thanks |
|
| Back to top |
|
|
|
|
|
|
|
|
|
xavier
Fordmods Stock as a Rock
Age:21
Posts: 146
Joined: 23 Dec 2005
Location: perth WA, Australia
View User Gallery (0)
|
| Posted: Sun Jun 29, 2008 2:40 pm Post subject: |
|
|
| yea, be paitent when your doing it, i got realy frustrated doing mine. u have to remove your whole dash, i think kickpannels to manouver your dash around, then undo all the bolts from steering colum brake booster ect, remove the pedals n then try and manouver it out, i didnt completly remove my dash from the car i just left it hanging loose which was why i found it difficult ro remove and replace n is why i got so frustrated, if you can be bothered completly removing the dash from the car it will make the job a whole lot easier |
|
| Back to top |
|
|
|
|
|
|
|
|
|
nvk-351
Fordmods Parts Gopher
Posts: 95
Joined: 04 Jun 2007
Location: Melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Sun Jun 29, 2008 4:34 pm Post subject: |
|
|
| so when you say remove the whole das you do mean just the instrument cluster yeah? also do ihave to change the computer? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
FairmontXR6
Fordmods - Getting Side Ways
Age:23
Posts: 827
Joined: 10 Sep 2006
Location: Brisbane QLD, Australia
View User Gallery (3)
|
| Posted: Sun Jun 29, 2008 4:50 pm Post subject: |
|
|
I've heard alot of people on here (when doing manual conversions) talk about strengthing the clutch hole on the firewall.
Just a tip.  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
PIMP_LTD
Fordmods - Getting Side Ways
Age:22
Posts: 1253
Joined: 25 Apr 2008
Location: Brisbane QLD, Australia
View User Gallery (0)
|
| Posted: Sun Jun 29, 2008 5:17 pm Post subject: |
|
|
| FairmontXR6 wrote: | I've heard alot of people on here (when doing manual conversions) talk about strengthing the clutch hole on the firewall.
Just a tip. |
Yes i recently had to do this, although mine is a factory manual.
While your doing the conversion, it'd pay for you to do it now.
Andrew. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
rushed
Fordmods Junkie
Posts: 2763
Joined: 22 Sep 2005
Location: Melbourne VIC, Australia
View User Gallery (10)
|
| Posted: Sun Jun 29, 2008 8:12 pm Post subject: |
|
|
what xavier said, i did the same, centre console out, whole dash unbolted steering column unbolted, lift dash off mountings, and get the bolts free, rip the pedal box out, then reverse.
in the tech docs section there is a guide written by phongus i think that went into enough detail to get the job done, its a b**ch to do, but stick at it. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
twr7cx
Fordmods - Getting Side Ways
Age:22
Posts: 10397
Joined: 15 Nov 2004
Location: Hobart TAS, Australia
View User Gallery (0)
|
| Posted: Sun Jun 29, 2008 8:21 pm Post subject: |
|
|
| any reason to change the pedal box over instead of just going the mal wood pin route? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
nightstalker
Fordmods Tyre Shredder
Age:43
Posts: 337
Joined: 27 Jan 2005
Location: Bathurst NSW, Australia
View User Gallery (2)
|
| Posted: Mon Jun 30, 2008 2:01 pm Post subject: |
|
|
| From what Ive read I would suggest going the mal wood pin, it would be far more quicker and easier, I think the dash out is the old way.. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
chops1
Fordmods Oompa Loompa
Age:30
Posts: 37
Joined: 28 May 2008
Location: melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Sat Jul 12, 2008 5:14 pm Post subject: |
|
|
| I just did what Froudey done i used an 5/8th bolt with some washers and acouple of nuts.I also got myself apeice of steel plate drilled acouple of holes in it and attached that aswell to strengthen the the pedal box.This way works exactly the same as the Mal Wood Pin and it only cost me about $10.If you go this route just make sure you get hitensile bolts&nuts |
|
| Back to top |
|
|
|
|
|
|
|
|
|
94efdabomb
Fordmods Newbie
Age:20
Posts: 8
Joined: 26 Jul 2008
Location: cessnock NSW, Australia
View User Gallery (0)
|
| Posted: Sat Jul 26, 2008 8:10 pm Post subject: i did this way |
|
|
| nightstalker wrote: | | From what Ive read I would suggest going the mal wood pin, it would be far more quicker and easier, I think the dash out is the old way.. |
but after 12 mnths it dosnt last it shears away and you r left stranded untill you put another clutch box in i learnt the hard way $200 for a tow truck then $450 for the clutch box and labour |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
| (c)2002-2008 Matti Jones and Brad Evans |
[37 queries :: 0.03699 seconds ]
|
|
