 |
|
|
|
|
|
|
|
|
|
shannonwulff
Fordmods - Getting Side Ways
Age:19
Posts: 487
Joined: 06 Feb 2006
Location: Perth WA, Australia
View User Gallery (3)
|
 Posted: Wed Jul 30, 2008 8:33 pm Post subject: NL High Series Cluster Door Sensor Wiring |
 |
|
hey all
I'm installing the complete high series dash into my GLi, and the only problem I have come across is with the door ajar sensor wiring.
I wish to use the stocko push-buttons instead of the rare sensors, and use a diode rig to make any of the doors activate the interior light, but I cannot find out to make the cluster think the door is closed.
The boot light comes on when grounded, so thats cool. but the 4 door lights flash with an open circuit, but neither +12 or grounding the connections results in a change. has anyone solved this one?
thanks heaps
|
|
| Back to top |
|
|
|
|
|
|
|
|
|
twason
Fordmods - Getting Side Ways
Posts: 2090
Joined: 06 Nov 2004
Location: Canberra - The Nations Capital ACT, Australia
View User Gallery (9)
|
| Posted: Wed Jul 30, 2008 8:38 pm Post subject: |
|
|
| There needs to be 2 resistors, 180 and 1200 ohms from memory. You need to short out the 1200 ohm when closed. The sensors are not rare, any E series fairlane or LTD has them and they work better than a switch as it actually detects unlatched rather than actually open.
|
|
| Back to top |
|
|
|
|
|
|
|
|
|
shannonwulff
Fordmods - Getting Side Ways
Age:19
Posts: 487
Joined: 06 Feb 2006
Location: Perth WA, Australia
View User Gallery (3)
|
| Posted: Wed Jul 30, 2008 8:41 pm Post subject: |
|
|
sweet thanks mate, ill give that a shot
but arent they prone to breaking due to their age?
|
|
| Back to top |
|
|
|
|
|
|
|
|
|
twason
Fordmods - Getting Side Ways
Posts: 2090
Joined: 06 Nov 2004
Location: Canberra - The Nations Capital ACT, Australia
View User Gallery (9)
|
| Posted: Wed Jul 30, 2008 8:43 pm Post subject: |
|
|
| shannonwulff wrote: | sweet thanks mate, ill give that a shot
but arent they prone to breaking due to their age? |
Only getting them in or out.
|
|
| Back to top |
|
|
|
|
|
|
|
|
|
shannonwulff
Fordmods - Getting Side Ways
Age:19
Posts: 487
Joined: 06 Feb 2006
Location: Perth WA, Australia
View User Gallery (3)
|
| Posted: Wed Jul 30, 2008 8:46 pm Post subject: |
|
|
| sweet. thanks heaps
|
|
| Back to top |
|
|
|
|
|
|
|
|
|
BenJ
Cruise Moderator
Posts: 1489
Joined: 20 May 2005
Location: Seven Hills, Sydney NSW, Australia
View User Gallery (11)
|
| Posted: Thu Jul 31, 2008 10:55 pm Post subject: |
|
|
The other side effects of doing the easy/lazy way is
A. that you already know the door is open as the light is on
B. you won't be able to tell which door is open specifically, so all the doors will show as open on the dash
C. if you turn the interior light on manually the doors will show as open
Do it the right way. Get the sensors from any Fairlane NA to NL. Worked a treat for me.
BenJ
|
|
| Back to top |
|
|
|
|
|
|
|
|
|
Happy
Moderator
Age:35
Posts: 9946
Joined: 05 Nov 2004
Location: Perth WA, Australia
View User Gallery (4)
|
| Posted: Thu Jul 31, 2008 10:56 pm Post subject: |
|
|
| Vic might be able to help you here, he's done this mod...
|
|
| Back to top |
|
|
|
|
|
|
|
|
|
shannonwulff
Fordmods - Getting Side Ways
Age:19
Posts: 487
Joined: 06 Feb 2006
Location: Perth WA, Australia
View User Gallery (3)
|
| Posted: Thu Jul 31, 2008 11:04 pm Post subject: |
|
|
nah man i can do better than that.
ill use diodes to create a situation where the door lights and the interior lights are mutually exclusive, the only difference will be the lights not coming on when the doors are just clicked open.
| BenJ wrote: | The other side effects of doing the easy/lazy way is
A. that you already know the door is open as the light is on
B. you won't be able to tell which door is open specifically, so all the doors will show as open on the dash
C. if you turn the interior light on manually the doors will show as open
Do it the right way. Get the sensors from any Fairlane NA to NL. Worked a treat for me.
BenJ |
|
|
| Back to top |
|
|
|
|
|
|
|
|
|
BenJ
Cruise Moderator
Posts: 1489
Joined: 20 May 2005
Location: Seven Hills, Sydney NSW, Australia
View User Gallery (11)
|
| Posted: Thu Jul 31, 2008 11:21 pm Post subject: |
|
|
You will still have the problem that one open door will show all the doors on the dash as open.
I did this conversion in the last two weeks.
Yes it is a pain to completely dismantle the doors to get the locks out, but then you just clip in the switch and reassemble. Run some wires to the car and hook it all up. The doco has all the info.
In addition, the door ajar sensors will indicate the door is still open if not completely closed. The interior lights will be out but the door may not be latched home.
It defeats the purpose to hook it up the way you plan to do it.
Good luck
BenJ
|
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
