 |
|
|
|
|
|
|
|
|
|
fordster
Fordmods Parts Gopher
Age:30
Posts: 98
Joined: 12 Feb 2005
Location: christchurch New Zealand
View User Gallery (0)
|
 Posted: Tue Aug 19, 2008 5:48 pm Post subject: el ecu into ea rewireing tcm?? |
 |
|
hey guys
I am in middle of rewireing tcm on ea which was cpi and is now running ef with ea fairmont mpi loom and ecu
Have found most info but have found some wires from tcm going into ecu loom allready have wires there that arent mentioned in various posts searched on here ie:
ea tcm pin 26 into ecu pin35 has orange/blk
ea tcm pin 18 into ecu pin27 has green/ylw
ea tcm pin 17 into ecu pin30 has ylw/blu
all the rest are fine as stated in previous posts on this conversion
does anybody have pinout numbers and colours for ea mpfi or can shed light on these wires please help if you can thanks mike. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
fordster
Fordmods Parts Gopher
Age:30
Posts: 98
Joined: 12 Feb 2005
Location: christchurch New Zealand
View User Gallery (0)
|
| Posted: Tue Aug 19, 2008 8:36 pm Post subject: |
|
|
| thats where I got info from but it doesnt mention about splicing into the extra wires allready in ecu plug ie : pins 35 27 30 |
|
| Back to top |
|
|
|
|
|
|
|
|
|
knowsfords
Fordmods Tyre Shredder
Posts: 318
Joined: 28 Oct 2005
Location: Brisbane QLD, Australia
View User Gallery (0)
|
| Posted: Tue Aug 19, 2008 8:53 pm Post subject: |
|
|
Just leave them I suppose? 
EDIT: by the way, thanks snap0964 that should help me with my own tcm woes (running the el computer) |
|
| Back to top |
|
|
|
|
|
|
|
|
|
snap0964
Technical Contributor
Age:44
Posts: 3004
Joined: 13 Jan 2005
Location: South Coast NSW, Australia
View User Gallery (10)
|
| Posted: Tue Aug 19, 2008 10:29 pm Post subject: |
|
|
| knowsfords wrote: | Just leave them I suppose?
EDIT: by the way, thanks snap0964 that should help me with my own tcm woes (running the el computer) |
NP.
| fordster wrote: | | thats where I got info from but it doesnt mention about splicing into the extra wires allready in ecu plug ie : pins 35 27 30 |
There's enough info in the posted link - time for you to use some nouse and figure it out. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
fordster
Fordmods Parts Gopher
Age:30
Posts: 98
Joined: 12 Feb 2005
Location: christchurch New Zealand
View User Gallery (0)
|
| Posted: Wed Aug 20, 2008 2:38 pm Post subject: |
|
|
ok....was just hopeing someone knew a bit more about it
will go to repco and see if can find some nouse  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
snap0964
Technical Contributor
Age:44
Posts: 3004
Joined: 13 Jan 2005
Location: South Coast NSW, Australia
View User Gallery (10)
|
| Posted: Wed Aug 20, 2008 8:38 pm Post subject: |
|
|
It'll be on the same shelf as the workshop manuals.  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
