 |
|
|
|
|
|
|
|
|
|
|
TerroristGHIA
Fordmods - Getting Side Ways
Age:37
Posts: 2487
Joined: 25 Nov 2004
Location: Sydney Australia NSW, Australia
View User Gallery (7)
|
 Posted: Wed May 21, 2008 6:57 pm Post subject: The Terrorist Is alive again |
 |
|
Well back in Feb i was cruising to Canberra for work and the 5.0 went BANG rattle Rattle Rattle. She sounded real sick, so whilst on course i dropped into a well known engine dude in the ACT and asked for a diagnosis. Diagnosis TERMINAL!!
I thought damn, time to finish the 427, so rang around and turns out i need a lot more than i have already put in so that scuttled that plan for a while. No probs park the Terrorist in the yard and pull it apart as time is available.
Well stripped the motor and what do ya know, blown head gasket between 1 and 2 cylinders. Had the heads checked and all good. So on the hunt for parts.
Full gasket kit etc. But there were a few other issues, namely i had sold some parts due to the fact i was told it was Terminal.
I had a spare 70mm TB so that wasnt an issue, but had sold my Cobra Rocker Covers and had none any more.So picked up some chrome FRPP Rocker Covers, all was looking sweet till i attempted to refit the RPMII, it fouled on the drivers side cover so i thought all it need s is another 1/2 inch lift, i know, lets fit that NOS plate i have had sitting around for a while.
So then the fun started, the plate doesnt clear the FPR or the rails for that matter so off to Summit i go for a full rail and reg kit.
Just waiting for them bits to turn up, but here are some teaser pics of where i am at until the rails arrives from the states.
Last edited by TerroristGHIA on Wed Nov 05, 2008 2:36 pm, edited 6 times in total |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Disco Frank
Fordmods Junkie
Age:29
Posts: 13580
Joined: 05 Nov 2004
Location: Perth WA, Australia
View User Gallery (7)
|
| Posted: Wed May 21, 2008 7:04 pm Post subject: |
|
|
NAAAAAAAAAWWWWWWWWWSSSSSSSSSSS  |
|
| Back to top |
|
|
|
|
|
|
|
|
|
dilberto
Fordmods Stock as a Rock
Posts: 192
Joined: 11 May 2008
Location: mackay QLD, Australia
View User Gallery (0)
|
| Posted: Wed May 21, 2008 7:05 pm Post subject: |
|
|
| wholly crap, lucky u got the buldge now ay |
|
| Back to top |
|
|
|
|
|
|
|
|
|
XH5LWEPN
Fordmods - Getting Side Ways
Age:22
Posts: 1774
Joined: 13 Aug 2005
Location: Perth WA, Australia
View User Gallery (15)
|
| Posted: Wed May 21, 2008 7:12 pm Post subject: |
|
|
That sure is sittng high there Brett.
So the reg i sent over was no good mate?? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
TerroristGHIA
Fordmods - Getting Side Ways
Age:37
Posts: 2487
Joined: 25 Nov 2004
Location: Sydney Australia NSW, Australia
View User Gallery (7)
|
| Posted: Wed May 21, 2008 7:20 pm Post subject: |
|
|
Unfortunately no, Sorry, it was all looking good til i went silly and got the tall covers and thought hmmm, that NOS Plate will solve that problem
Brett |
|
| Back to top |
|
|
|
|
|
|
|
|
|
TerroristGHIA
Fordmods - Getting Side Ways
Age:37
Posts: 2487
Joined: 25 Nov 2004
Location: Sydney Australia NSW, Australia
View User Gallery (7)
|
| Posted: Wed May 21, 2008 7:36 pm Post subject: |
|
|
Here are a few more pics, the NOS Plate and another veiw of the side. It actually sits quite tall, and clears the bonnet cause of the bulge, but a small bit of trimming of the inside on the rear of the bonnet will be needed to close properly.
Brett |
|
| Back to top |
|
|
|
|
|
|
|
|
|
green machine
Cruise Moderator
Age:28
Posts: 653
Joined: 13 Jul 2005
Location: sydney NSW, Australia
View User Gallery (10)
|
| Posted: Wed May 21, 2008 8:25 pm Post subject: |
|
|
| looking good there brett! lucky the motor is all good still hey!!! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
greg302
Fordmods - Smokin em up
Age:28
Posts: 261
Joined: 10 May 2005
Location: melbourne VIC, Australia
View User Gallery (0)
|
| Posted: Wed May 21, 2008 8:28 pm Post subject: |
|
|
| so with the 1/2" spacer the rpmII still hit on the ford racing covers? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
Stevo
Fordmods Tyre Shredder
Posts: 383
Joined: 05 Nov 2004
Location: Melb VIC, Australia
View User Gallery (4)
|
| Posted: Wed May 21, 2008 8:31 pm Post subject: |
|
|
Oh that is just pure sex.
Lovin the nos plate and rocker covers.
Great looking setup so far mate |
|
| Back to top |
|
|
|
|
|
|
|
|
|
TerroristGHIA
Fordmods - Getting Side Ways
Age:37
Posts: 2487
Joined: 25 Nov 2004
Location: Sydney Australia NSW, Australia
View User Gallery (7)
|
| Posted: Wed May 21, 2008 8:37 pm Post subject: |
|
|
Yes the 1/2 in spacer still hit, these are the tall Ford Racing Covers. I never had an issue with the Ford Racing EFI Covers, cept the oil filler was on the wrong side with the RPMII reversed for Aussie falcons.
Thanks troy, now when am i going to see some painted skirts, and i will have some mirrors for you to if i get off my a*** and get to bills to pick them up.
Brett |
|
| Back to top |
|
|
|
|
|
|
|
|
|
green machine
Cruise Moderator
Age:28
Posts: 653
Joined: 13 Jul 2005
Location: sydney NSW, Australia
View User Gallery (10)
|
| Posted: Wed May 21, 2008 8:46 pm Post subject: |
|
|
| haha i need to pre fit your skirts first brett then i can paint. mirrors hey cool!!! |
|
| Back to top |
|
|
|
|
|
|
|
|
|
TerroristGHIA
Fordmods - Getting Side Ways
Age:37
Posts: 2487
Joined: 25 Nov 2004
Location: Sydney Australia NSW, Australia
View User Gallery (7)
|
| Posted: Wed May 21, 2008 8:49 pm Post subject: |
|
|
Yep, no more race tape holding them in place lol
Brett |
|
| Back to top |
|
|
|
|
|
|
|
|
|
BuNtEr
Technical Contributor
Age:41
Posts: 3227
Joined: 12 Feb 2007
Location: your mums NSW, Australia
View User Gallery (10)
|
| Posted: Wed May 21, 2008 9:05 pm Post subject: |
|
|
| TerroristGHIA wrote: | Yes the 1/2 in spacer still hit, these are the tall Ford Racing Covers. I never had an issue with the Ford Racing EFI Covers, cept the oil filler was on the wrong side with the RPMII reversed for Aussie falcons.
Thanks troy, now when am i going to see some painted skirts, and i will have some mirrors for you to if i get off my a*** and get to bills to pick them up.
Brett |
whoo lol hahahaha
they are here waiting still. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
steveurban
Fordmods Stock as a Rock
Age:39
Posts: 137
Joined: 22 May 2007
Location: melb VIC, Australia
View User Gallery (8)
|
| Posted: Mon May 26, 2008 1:58 am Post subject: |
|
|
are you still running the 3 vac port's from the front of the upper manifold?
as i've got a typhoon "performer knock off" and are thinking of duplicating the ports onto the rear.....to clean things up.
i've also got a 1/2 inch spacer & edelbrock elite "tall" covers...
hoping that all will have clearance? like yourself are fitting a hood scoop, looking at "cowl induction" type at the minute......
in my haste i got alot of stuff when i got the car thinking a "302" product fit's all model's  thanks to the bloke's on the site are getting a clue on what works. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
TerroristGHIA
Fordmods - Getting Side Ways
Age:37
Posts: 2487
Joined: 25 Nov 2004
Location: Sydney Australia NSW, Australia
View User Gallery (7)
|
| Posted: Mon May 26, 2008 8:45 am Post subject: |
|
|
Am only using 2 of the ports at the front of the manifold. I also have a T peice at the rear for the brakes and the PCV. The 3rd port is from the side of the TB neck and goes to the fuel reg.When the rails turn up i will assemble it and post pics if that helps
Brett |
|
| Back to top |
|
|
|
|
|
|
|
|
|
steveurban
Fordmods Stock as a Rock
Age:39
Posts: 137
Joined: 22 May 2007
Location: melb VIC, Australia
View User Gallery (8)
|
| Posted: Tue May 27, 2008 12:34 am Post subject: |
|
|
that'd be great as not 100% on what has to go where
going to give the install ago myself  , still have to source some heads & cam .....looking at afr's ...i got a 80mm holley t/body, r/covers etc not long after i got the car , but may be to big for the combo? |
|
| Back to top |
|
|
|
|
|
|
|
|
|
TerroristGHIA
Fordmods - Getting Side Ways
Age:37
Posts: 2487
Joined: 25 Nov 2004
Location: Sydney Australia NSW, Australia
View User Gallery (7)
|
| Posted: Wed May 28, 2008 3:33 pm Post subject: |
|
|
Well my rails came in, and off to earls for some fittings.
Attached is some more pics of the Rail and associated plumbing for the reg. The NOS was also hooked up, but hasn't been mounted or wired yet.
Enjoy |
|
| Back to top |
|
|
|
|
|
|
|
|
|
BuNtEr
Technical Contributor
Age:41
Posts: 3227
Joined: 12 Feb 2007
Location: your mums NSW, Australia
View User Gallery (10)
|
| Posted: Wed May 28, 2008 3:39 pm Post subject: |
|
|
| TerroristGHIA wrote: | Well my rails came in, and off to earls for some fittings.
Attached is some more pics of the Rail and associated plumbing for the reg. The NOS was also hooked up, but hasn't been mounted or wired yet.
Enjoy |
what ever you do Brett DONT cut the yellow wire HAHAHAHAHAHA |
|
| Back to top |
|
|
|
|
|
|
|
|
|
TerroristGHIA
Fordmods - Getting Side Ways
Age:37
Posts: 2487
Joined: 25 Nov 2004
Location: Sydney Australia NSW, Australia
View User Gallery (7)
|
| Posted: Wed May 28, 2008 3:42 pm Post subject: |
|
|
| Here are some more |
|
| Back to top |
|
|
|
|
|
|
|
|
|
BuNtEr
Technical Contributor
Age:41
Posts: 3227
Joined: 12 Feb 2007
Location: your mums NSW, Australia
View User Gallery (10)
|
| Posted: Wed May 28, 2008 3:46 pm Post subject: |
|
|
| Brett i like that style of rocker cover than the ones you had before suit it better. |
|
| Back to top |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
| |
| (c)2002-2008 Matti Jones and Brad Evans |
[47 queries :: 0.0511 seconds ]
|
|
