|
| ghiaguy |
|
||
|
Hi guys,
Has anyone fitted a dipstick to an EL auto gearbox?It's a real pain checking the level without one.I guess the filler plug thread into the box would be a problem. Thanks in advance |
||
| Top | |
||
| Brett 4777 |
|
||
|
if you take it any reputable trans mission place they should be able to do it for you
the hole is there inside the case it is just not drilled to meet the outside then you buy a dipstick from a ef trans and you are set |
||
| Top | |
||
| snap0964 |
|
|||
|
http://www.fordmods.com/forums/viewtopic.php?t=44352
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| gogetta |
|
|||
|
Brett 4777 wrote: if you take it any reputable trans mission place they should be able to do it for you
the hole is there inside the case it is just not drilled to meet the outside then you buy a dipstick from a ef trans and you are set im needing to do this also...so is it just a matter of drilling a hole for the pipe?
_________________ |
|||
| Top | |
|||
| Brett 4777 |
|
||
|
correct all they need to do is drill the hole through the case
clean it up a bit with a file and put the dipstick in as the second top bellhousing bolt is where the dipstick bracket bolts to. |
||
| Top | |
||
| gogetta |
|
|||
|
how do u stop the metal drillings going down into the box?
_________________ |
|||
| Top | |
|||
| Brett 4777 |
|
||
|
you have to do it from inside the auto
by taking the transmission pan off as there is a dipstick hole casting on the inside |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 30 guests |
