|
| TerroristGHIA |
|
|||
|
OK, i have completed the AU live axle into EF, and am now chasing some udjustable lower control arms to fix the pinion angle, or at least allow me to play with the angle.
These are my options as far as i can tell. http://www.summitracing.com/parts/CEE-8010/?rtype=10 and http://www.summitracing.com/parts/UPI-2016-B/?rtype=10 Now i know the second set are for a Camaro/Pontiac, but what i need is info on the actual length. I have emailed Summit and requested a length measurement on both items, but was hoping someone here may be able to help. Cheers Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| SWC |
|
||
|
What is your time frame Brett? Is there any difference between EF/EL and AU?
|
||
| Top | |
||
| TerroristGHIA |
|
|||
|
There must be, as the diff now sits up at a slight angle.
I would be willing to have some made, and the time frame is a while. Still need an exhaust before it runs and can be tuned. My plan would be to possibly cut both the mount points off and have an adjustable bar inserted, same as in the links. Seems easy enough. Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| SWC |
|
||
|
Ok there must be a difference in length but what about connection and alignment?
|
||
| Top | |
||
| TerroristGHIA |
|
|||
|
Seems to be ok, for alaignment and connection, But if we had an adjustable lower, then i will be able to correct the pinion angle so the car doesn't try to shake itself to peices when it runs again.
Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| SWC |
|
||
|
Ok I think we can do something. Need 2 lower control arms and see what we can do.
|
||
| Top | |
||
| cjh |
|
|||
|
I'd be looking at the upper trailing arms.....there are different length ones depending on model. EF are different to EL, and Tickford ones are different again.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| Papa Smurf |
|
||
|
TerroristGHIA wrote: There must be, as the diff now sits up at a slight angle. I would be willing to have some made, and the time frame is a while. Still need an exhaust before it runs and can be tuned. My plan would be to possibly cut both the mount points off and have an adjustable bar inserted, same as in the links. Seems easy enough. Brett Brett, I have a couple of Upper control arms at home off an AU XR, EL XR, PM me if you are interested. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 40 guests |
