|
| ea street sleeper |
|
||
|
how different is tha suspesnion n brake setups on tha front end of the ea to tha au ?????
_________________ 89 ea falcon " panda" ef 5spd i6 engine with wade 1673 cam shaved ported head, full stainless 2 n half inch zaust 20 inch rims n 330mm brake upgrade soon to hae m90 blower running 12 pound pulley |
||
| Top | |
||
| relaxed_diplomacy |
|
||
|
The earlier models have radius arms and lower strut links, whereas the AU has a lower wishbone and a different upper wishbone. They are not interchangeable. (also, the AUI's lower wishbone is different to the AUII's lower wishbone).
_________________ wrecking 9/97 EL fairmont sedan burgundy 6cyl auto 270k modBAintake |
||
| Top | |
||
| xcabbi |
|
||
|
IIRC AU front end is the same as EF/EL. I know for sure that the front brakes are the same.
|
||
| Top | |
||
| relaxed_diplomacy |
|
||
|
xcabbi wrote: IIRC AU front end is the same as EF/EL. I know for sure that the front brakes are the same.
I'm pretty sure the EF/EL's don't have a lower wishbone, but i can't remember the last time i looked at one.
_________________ wrecking 9/97 EL fairmont sedan burgundy 6cyl auto 270k modBAintake |
||
| Top | |
||
| twase |
|
|||
|
xcabbi wrote: IIRC AU front end is the same as EF/EL. I know for sure that the front brakes are the same. Totally different design for the AU, AU1 has EL brake calipers but that is about it, the rotor/hub design is a totally different design between E and A series.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| TerroristGHIA |
|
|||
|
Au's have a floating hub on the front for the brakes, E series the brake is attached to the stub axle. Also geometry is different. PM macxr8, he replaced the entire suspension in his EL with AUII XR including IRS.
Also XTT909 has done the IRS rear conversion. Brett
_________________ The Terrorist ED Retired due to RUST. |
|||
| Top | |
|||
| ea street sleeper |
|
||
|
ohk thanks so its doubtfull i could get an au front end asssembally into an ea really i only need the rotor break and strut setup like everything in the wheel well bcoz im trying to get sum 19 inch rims on my car but all have the au offset so only way i can do it now is with wheel spacers but then i cant get an engineers certificate for tha rims so i dont get defected every 5 minutes lol but yea does any1 have a link to sum1 that done tha modifications to the ef/el bcoz they have a similar setup dont they
???
_________________ 89 ea falcon " panda" ef 5spd i6 engine with wade 1673 cam shaved ported head, full stainless 2 n half inch zaust 20 inch rims n 330mm brake upgrade soon to hae m90 blower running 12 pound pulley |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 31 guests |
