OK, so i have finally finished the install of the AUII diff into the EF, I have now run into some issues with the hand brake.

I have installed the complete AUII cables, but kept the EF handbrake lever. What i need to know is weather the cable goes under or over the diff where the 2 sides meet.

Then i need to work out how to secure it so that pulling on the lever actually activates the handbrake.

Any pictures of a live axle rear end and associated cables would be greatly appreciated.

Cheers

Brett

Spot on, I see it goes under the diff. I have a feeling i will need some sort of bracket at the top off the diff, as the cable seems to move and as such when the handbrake is applied the join ends up near the from of the sway bar.

Will finish it in the morning.

Thanks Ash

Brett