|
| COPEZ |
|
||
|
has anyone put a mini spool in a non turbo xr6 and im looking at 3.9s for my ratio, just want to know what it cost and if the xr drive shafts and cv's will handle a spool
|
||
| Top | |
||
| 67RCE |
|
||
|
to answer all your questions in one hit, NO. look at a Lokka before a spool, spools are downright dangerous for street use, speaking from experience
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| prydey |
|
|||
|
67RCE wrote: spools are downright dangerous for street use, speaking from experience
i reckon your age and driving style had more to do with your accident than the spool! i don't know you but going by some of the comments from people who do when you put the spool in, its an educated guess. i've got an eb v8 making pretty reasonable power for what it is. also has 3.9 diff gears and when i bought it it had a minispool. i'd never had any experience with spools before but i never had an issue with it. had it in there for about 8 mnths before converting to l.s.d. due to it being a daily driver. i found it to be very predictable. the bit thats not predictable is the bit that holds onto the steering wheel. having said that, spools are illegal.
_________________ eb v8: low loud and fast. just how a v8 should be. i guess the big question is, is it fast enough... |
|||
| Top | |
|||
| 67RCE |
|
||
|
yes a spool is predictable (will kick the a*** out anytime you boot it midcorner) but they chew through tyres like no tomorrow (1500k's, no skids, rears were f**k) and yea, my driving style may have contributed, but not in the situation i was in...
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| smoke_ |
|
|||
|
67RCE wrote: yes a spool is predictable (will kick the a*** out anytime you boot it midcorner) but they chew through tyres like no tomorrow (1500k's, no skids, rears were f**k) and yea, my driving style may have contributed, but not in the situation i was in...
HAHAHAHA, NO SKIDS LOL THAT IS THE BIGGEST LOAD OF s**t I HAVE READ!!!
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
67RCE wrote: yes a spool is predictable (will kick the a*** out anytime you boot it midcorner) but they chew through tyres like no tomorrow (1500k's, no skids, rears were f**k) and yea, my driving style may have contributed, but not in the situation i was in...
Spools are illegal for a reason! go a lokker, they are legal and are not a cheap C*** method like a spool is..
_________________
|
|||
| Top | |
|||
| 67RCE |
|
||
|
yup, as i said, DO NOT GO SPOOL
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| BuNtEr |
|
||
|
COPEZ wrote: has anyone put a mini spool in a non turbo xr6 and im looking at 3.9s for my ratio, just want to know what it cost and if the xr drive shafts and cv's will handle a spool
i would not stick a mini spool in a daily driver, reason is it will put to much stress on your rear end as there is no give in it. if you notice a car with a mini spool they wobble around corners when driveing slow, that will make bushs and rubbers split and wear out faster. in the end just get a good LSD
_________________ BANNED |
||
| Top | |
||
| Mitch_ |
|
|||
Posts: 6168 Joined: 5th Nov 2004 |
BuNtEr wrote: COPEZ wrote: has anyone put a mini spool in a non turbo xr6 and im looking at 3.9s for my ratio, just want to know what it cost and if the xr drive shafts and cv's will handle a spool i would not stick a mini spool in a daily driver, reason is it will put to much stress on your rear end as there is no give in it. if you notice a car with a mini spool they wobble around corners when driveing slow, that will make bushs and rubbers split and wear out faster. in the end just get a good LSD and there illegal...get a lokker! lsd's are for poofs 
_________________
|
|||
| Top | |
|||
| smoke_ |
|
|||
|
Mitch_ wrote: BuNtEr wrote: COPEZ wrote: has anyone put a mini spool in a non turbo xr6 and im looking at 3.9s for my ratio, just want to know what it cost and if the xr drive shafts and cv's will handle a spool i would not stick a mini spool in a daily driver, reason is it will put to much stress on your rear end as there is no give in it. if you notice a car with a mini spool they wobble around corners when driveing slow, that will make bushs and rubbers split and wear out faster. in the end just get a good LSD and there illegal...get a lokker! lsd's are for poofs hahahah u just want mine!
_________________ NEW RIDE - FPV FG F6 6spd Auto. 12.26@114MPH, 1.88 60FT on Cheapy Tyres with 38PSI - Stock except K&N filter! |
|||
| Top | |
|||
| BuNtEr |
|
||
|
Mitch_ wrote: BuNtEr wrote: COPEZ wrote: has anyone put a mini spool in a non turbo xr6 and im looking at 3.9s for my ratio, just want to know what it cost and if the xr drive shafts and cv's will handle a spool i would not stick a mini spool in a daily driver, reason is it will put to much stress on your rear end as there is no give in it. if you notice a car with a mini spool they wobble around corners when driveing slow, that will make bushs and rubbers split and wear out faster. in the end just get a good LSD and there illegal...get a lokker! lsd's are for poofs Im not a poof i just wear comfy shoes, lol
_________________ BANNED |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 25 guests |
12.06@120MPH
