Just wondering if it is possible to replace the part on the Release Lever that attaches to the clutch cable. (See attached pic) mine happened to break today on the way home from xmas shopping. My clutch was replaced about 5 weeks ago. Looks like they replaced the Release lever with a new one but put the old part back on that attaches the cable to the lever. Any help would be greatly appreciated.

Rick

 

 

Attachments:

Release Thingo 1.jpg [ 50.9 KiB | Viewed 178 times ]

got a welder.
cut sic

that happend to me too but mine didnt snap it spred apart i recon the cluch was too heavy. i dont think it was too expensive to replace.
but if u wanna fix it i would drill the centre out and place a solid threaded shaft through it with hooks made onto it to hold the cable.

yes you can buy them from ford at about 30 dollars, are a pain to remove and install but only takes an hour to do. after welding mine twicw I gave up and got a new one

Fixed it. Bought a new one from Ford. Cost $30.70 Looks like a pretty crap design. Lets see how long it lasts for. Thanks for your help guys.