|
| TimmyA |
|
|||
|
Hello all,
Probably get drilled as no doubt this has been covered before... None the less... For someone who is wiser than me... An EA diff will fit in an ED yes? As long as I use my trailing arms (both or just one set) as something is a different length yes? And is this the same with EF and EL diff's? And an NC (not familiar with the N series, so not sure which model this coincides with?) Thanks, Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| TROYMAN |
|
||
|
timmytimtim wrote: Hello all, Probably get drilled as no doubt this has been covered before... None the less... For someone who is wiser than me... An EA diff will fit in an ED yes? As long as I use my trailing arms (both or just one set) as something is a different length yes? And is this the same with EF and EL diff's? And an NC (not familiar with the N series, so not sure which model this coincides with?) Thanks, Tim an ea diff can go into a ed.. but the ed lower trailing arms bushes are different widths, ed has a wider bush.. so you can use ea lower arms and fit a spacer on the bush where the arm mounts to the body. also you need to change the diff flange over to the ed one or use the ea tail shaft.. |
||
| Top | |
||
| lethal EA |
|
|||
|
Whats the go with ABS? I have a EB diff with no ABS to go into a ED with ABS, how hard will it be to put the ABS stuff on the EB diff?
_________________ Black ED Ghia |
|||
| Top | |
|||
| TimmyA |
|
|||
|
thanks troy... make sense now... Can't help with the ABS though as I don't have it
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| TROYMAN |
|
||
|
lethal EA wrote: Whats the go with ABS? I have a EB diff with no ABS to go into a ED with ABS, how hard will it be to put the ABS stuff on the EB diff? you need to use the ed axles and ed brake backing plates.... |
||
| Top | |
||
| cjh |
|
|||
|
TROYMAN wrote: lethal EA wrote: Whats the go with ABS? I have a EB diff with no ABS to go into a ED with ABS, how hard will it be to put the ABS stuff on the EB diff? you need to use the ed axles and ed brake backing plates.... The ABS rear axles have a tone wheel...and the caliper mounts have holes and a thread for the ABS sensor to bolt to.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| TimmyA |
|
|||
|
And Troy,
an NC (I'm not familiar with the N series) would this have skinny trailing arms, or same as ED? Cheers< Tim
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| TROYMAN |
|
||
|
timmytimtim wrote: And Troy, an NC (I'm not familiar with the N series) would this have skinny trailing arms, or same as ED? Cheers< Tim nc should be the same as the ed.. aslong as its after mid 92. |
||
| Top | |
||
| TimmyA |
|
|||
|
ah ok cheers man...
_________________ 93 Red ED 5spd Manual Build Thread |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: No registered users and 19 guests |
