|
| 89.SVO |
|
|||
Age: 34 Posts: 3379 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
mtb_2050 wrote: TROYMAN wrote: as above, if its an ea to el box it will be 2" shorter than the au t5 box and the shift will be too far forward.. the pedal box is different, the bellhousing will fit but 4 of the lower bolts wont line up.. the ea flywheel and cluch will fit but is a smaller clutch than the au, sound like a dead loss if its an ea t5 conversion.. what makes you think its from a ea?? The guy I bought it off has written on the add t5 conversion to suit ford ea-au I talked on the phone to him and he said he modified the pedal box to fit the Ef he had it in so it should fit the au as for the length Of the gearbox he didn't say anything but he assures me it will fit in my au I think he said it's out of a ea but seems reluctant to tell me exactly what model car it's from Im not sure if he even knows :-/ off ebay? i seen that. told him it won't suit a AU. he called me a moron and said it would and i don't know what i'm talking about
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| AU99 |
|
|||
|
Froudey wrote: a tail shaft would have to found to fit. Tailshaft is the same..... EBII to AU is the same shaft... Peddle box will be different....
_________________ 2003 BA Falcon Egas Taxi Pack - XR Replica |
|||
| Top | |
|||
| mtb_2050 |
|
||
|
WILDEB wrote: mtb_2050 wrote: TROYMAN wrote: as above, if its an ea to el box it will be 2" shorter than the au t5 box and the shift will be too far forward.. the pedal box is different, the bellhousing will fit but 4 of the lower bolts wont line up.. the ea flywheel and cluch will fit but is a smaller clutch than the au, sound like a dead loss if its an ea t5 conversion.. what makes you think its from a ea?? The guy I bought it off has written on the add t5 conversion to suit ford ea-au I talked on the phone to him and he said he modified the pedal box to fit the Ef he had it in so it should fit the au as for the length Of the gearbox he didn't say anything but he assures me it will fit in my au I think he said it's out of a ea but seems reluctant to tell me exactly what model car it's from Im not sure if he even knows :-/ off ebay? i seen that. told him it won't suit a AU. he called me a moron and said it would and i don't know what i'm talking about Haha full on wanker mate he told me he had done the conversion heaps of times before and that it will fit straight in so far ive found the pedal box is completley different so ive found a au pedal box which fits and the crossmember is completley different aswell the one i have from the auto box in it now is 50mm too far back, the only way i can see around this is move the cross member forward 50mm and drill the 4 holes in the floor and reinforce it with stainless steel plates. Any ideas anyone?? |
||
| Top | |
||
| philbie |
|
|||
|
i wouldn't be drilling hole's in the floor. you will more than likely need to have it engineered for rego (don't quote me on that). look around for au-ba box that will bolt upto the original cross member mounts
|
|||
| Top | |
|||
| mtb_2050 |
|
||
|
I work in an engineering shop what i'll do is make a 1/4" plate and weld it to the crossmember then put 2 1/4 packers beyween the floor and the cross membr so the plate sits at the right hight then ill just drill a new hole 50mm forward for the manual box to fit straight in that should work.
|
||
| Top | |
||
| 67RCE |
|
||
|
The shifter will be in the ashtray for 1st, 3rd and 5th gears. Also, the centre console will have to go in the bin to use the box. Sell the conversion to someone with an E Series mante!
_________________ ILL60 - EF XR8, Sunroof, Ticky Kit, 19x8.5/19x11 TE37's, 347, AFr185's, TFS BoxRcustom converter, Hurst Quarterstick, huge billet cam. |
||
| Top | |
||
| mtb_2050 |
|
||
|
Is the 50mm difference in length between the au and the e series t5 the actual gearbox a different length or is it the bell housing?
|
||
| Top | |
||
| Gab1 |
|
|||
|
As others have said mate, nothing is the same, it wont fit your car, sell it, cut your losses and get an AU or early BA T5, the right pedal box, and start again.
Gab |
|||
| Top | |
|||
| mtb_2050 |
|
||
|
Gearbox is in i just had to modify the crossmember and it bolted straight up cheerin. Thanks everyone for your advice it was very helpful but i have one more question, there is a shudder in reverse and a slight shudder when down shifting what could this be? Thanks
|
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 20 guests |
