|
| alfy |
|
|||
|
HOw the HELL do you get to the top 2 bolts on the bellhousing? ive beem trying for f**k ever and cant latch onto them.
 we've been trying to take this piece of s**t auto out since 9am, im gonna find whoever threadlocked every single bolt on this thing and shoot them!!!!! can someone give me some tips? i need them real quick lol.
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
get someone to tilt the motor back with a piece of timber with leverage off the front of the block?
|
||
| Top | |
||
| Damo |
|
|||
|
about a meter worth of extensions with a uni joint on the end has always worked for me.
|
|||
| Top | |
|||
| alfy |
|
|||
|
FordFairmont wrote: get someone to tilt the motor back with a piece of timber with leverage off the front of the block? just tried that and it bent the top of the radiator 
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| snap0964 |
|
|||
|
Damo wrote: about a meter worth of extensions with a uni joint on the end has always worked for me. A couple of uni joints might be handy - one directly on the 19mm socket, and one between the extensions worked well for me.alfy wrote: FordFairmont wrote: get someone to tilt the motor back with a piece of timber with leverage off the front of the block? just tried that and it bent the top of the radiator The passenger side uppermost bolt will need access this way - the driver side uppermost one can be reached pretty easy in the engine bay with a ring spanner if you jack the transmission up against the tunnel, if you can't get to it with the transmission lowered.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| cjh |
|
|||
|
Drop the CAT pipe off. It lets the engine tilt further, so you can get the top bolts. You will need about a metre of extenions ( 1/2" drive) and 1 uni-joint and a 19mm socket.
Done hundreds like that.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| low_ryda |
|
|||
|
i've found putting a bottle jack under that he-uge casting that bolts onto the block for the alternator and lifting the front up very handy. with a 5spd but same theory would apply to the auto. also you need the meters worth of extensions n uni's
_________________ Not to get technical, but according to chemistry alcohol is a solution. |
|||
| Top | |
|||
| alfy |
|
|||
|
we got the f**k off. didnt need to take the cat off, its welded to the extractors and i was NOT going to take them off again
 the oil resembled the colour and viscosity of Coca Cola :S
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| FordFairmont |
|
||
Posts: 6113 Joined: 8th May 2007 |
not being able to unbolt the cat wouldve been the reason why you had so much trouble
|
||
| Top | |
||
| alfy |
|
|||
|
now we gotta get the manual bolted up
 lol
_________________ 2021 V6 Manual Amarok - 245kw/750nm - many goodies |
|||
| Top | |
|||
| TURBO_GHIA |
|
|||
|
grop the exhaust and the gearbox mount/bracket piece of piss then
_________________ HMMMM BOOST !!!
|
|||
| Top | |
|||
| Bug |
|
|||
|
2 top bolt for the manual is easy compared to the auto, no worries..
_________________ EL XR6 5spd |
|||
| Top | |
|||
| snap0964 |
|
|||
|
alfy wrote: we got the f**k off. didnt need to take the cat off, its welded to the extractors and i was NOT going to take them off again Undoing the exhaust at it's junction near the gearbox rear is the easiest. The exhaust mounts to the gearbox rear are different with the T5 and the BTR auto as well.
_________________ 96 XH Longreach 'S': LPG, Alarm, 3.23:1 LSD, Cruise, Trip Comp, ABS, Power Windows, Mid Series Dome Lt, Climate Ctrl |
|||
| Top | |
|||
| cjh |
|
|||
|
alfy wrote: we got the f**k off. didnt need to take the cat off, its welded to the extractors and i was NOT going to take them off again the oil resembled the colour and viscosity of Coca Cola :S Thats why its a really, really good idea to have flanges on the extractors, because later, you might need to fix/service something along the line.
_________________ http://youtu.be/jJTh9F3Vgg0 |
|||
| Top | |
|||
| ea_falcon |
|
||
|
yeah i had trouble but i just used extensions with a uni joint and rp7
first thing i did though was brake the sill by going the oppisite direction of undoing them then i just used all my energy and undid them slipped both times and cut my hands open but in the end they went off. its easier with the manual i just took the gear box of the bell housing and i had a lot more room to remove the bell housing
_________________ 02 series 3 AU marline ute 5speed 347 stroker |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: Google Adsense [Bot] and 23 guests |
