|
| TROYMAN |
|
||
|
yes they are interchangable
ive got the ea pinion flange on the ed diff straight fit ... |
||
| Top | |
||
| twase |
|
|||
|
Excellent. I have also heard the lower control arms mount up different between EA and EBII onward, did you have any trouble here?
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
twason wrote: Excellent. I have also heard the lower control arms mount up different beteween EA and EBII onward, did you have any trouble here?
ahh yea the ea lower arms have narrower bushes but the arms are the same.. there are 2 ways around it.. 1.. you use the ea arms and just put 2 new eb/ed bushes in the rear of the arms. 2.. you can grind the spacer that is welded on the chassis where the lower arm mounts and then you can use the eb arms.. its up to you... |
||
| Top | |
||
| joolz |
|
|||
|
I have a new pinion flange to suit EB on wards sittin in my shed. Free to who ever wants it but local pick up only in Melbourne. PM me if interested.
|
|||
| Top | |
|||
| twase |
|
|||
|
TROYMAN wrote: twason wrote: Excellent. I have also heard the lower control arms mount up different beteween EA and EBII onward, did you have any trouble here? ahh yea the ea lower arms have narrower bushes but the arms are the same.. there are 2 ways around it.. 1.. you use the ea arms and just put 2 new eb/ed bushes in the rear of the arms. 2.. you can grind the spacer that is welded on the chassis where the lower arm mounts and then you can use the eb arms.. its up to you...
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| TROYMAN |
|
||
|
ok
you can still use the ea arms but you might have to change the rear bushes on the arms or make up some spacers to take up the gap between the bush and the housing brackets.. hope this makes sense..... |
||
| Top | |
||
| twase |
|
|||
|
TROYMAN wrote: ok Yes I think a 10mm spacer either side of the arm will do the trick.
you can still use the ea arms but you might have to change the rear bushes on the arms or make up some spacers to take up the gap between the bush and the housing brackets.. hope this makes sense.....
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| twase |
|
|||
|
I won an EA diff and control arms for 99c today so I am able to test it out before hand. I picked it up and it has been sitting out in the weather for years by the look of things but I can swap over the yolk to the EF diff and fabricate the spacers. Should go well with a 3.08.
_________________ BF Fairmont Ghia Series II update. |
|||
| Top | |
|||
| Who is online |
|---|
Users browsing this forum: Google [Bot] and 18 guests |
