|
| ptoh2233 |
|
||
|
I have a 2005 ba mark ii ford and it has developed a shutter in the steering wheel at about 100kph
even when you slow down still there. does anybody have a idea what it could be? |
||
| Top | |
||
| SWC |
|
||
|
Shudder when braking?
|
||
| Top | |
||
| 89.SVO |
|
|||
Age: 34 Posts: 3379 Joined: 11th Mar 2008 Ride: EA SVO, AU2, Toyota Crown Location: Bendigo |
only when braking? when driving all the time at 100?
_________________ Daily driver: 2010 Toyota Crown hybrid 3.5L V6 hybrid. 254kw. |
|||
| Top | |
|||
| Mr220kw |
|
|||
|
If it's when driving, I've been having this problem with my Au after lowering it. You may need a castor/ camber adjustment. Do you find the steering tends to point where it's turned and not return to centre as you drive ??
You could try one of these http://www.nolathane.com.au/bulletins/Update%20701.pdf Cheers Mr220kw Last edited by Mr220kw on Mon Sep 06, 2010 9:19 pm, edited 1 time in total. |
|||
| Top | |
|||
| duderat |
|
||
|
iv had the same problem too since ftting the au wheels with spacers ont the el. get to 100 or when slowing and the wheel starts to shak. bloke at tyre and suspension place said a camber kit would fix it
|
||
| Top | |
||
| ptoh2233 |
|
||
|
IT SHUTTERS WHEN DOING 100 AND ABOVE
|
||
| Top | |
||
| Stu5766 |
|
||
Age: 42 Posts: 78 Joined: 15th Jun 2010 Ride: XD Fairmont Ghia 351 Location: Blue Mountains |
G'Day.
You might wanna check your brake booster. Although Ford will never admit it, the BA and BF had a tolerence problem with the rod in the brake booster to master. The rod is a bit to long and causes the brakes to just slightly apply when doing speeds of 80 kays and upwards, causing shudder and vibration. Talk to you local brake shop, im sure they will have herd of this. A reco booster should fix it. Cheers Stu. Hope this helps. |
||
| Top | |
||
| Matt_jew |
|
||
|
Stu5766 wrote: G'Day. You might wanna check your brake booster. Although Ford will never admit it, the BA and BF had a tolerence problem with the rod in the brake booster to master. The rod is a bit to long and causes the brakes to just slightly apply when doing speeds of 80 kays and upwards, causing shudder and vibration. Talk to you local brake shop, im sure they will have herd of this. A reco booster should fix it. Cheers Stu. Hope this helps. f**k me you are a wealth of information. That is something I didnt know.
_________________ xr6turnip wrote: More people paid for a ride in a VT commodore then an AU Falcon so the VT is superior.
Based on that fact my Mum is the best around! |
||
| Top | |
||
| Stu5766 |
|
||
Age: 42 Posts: 78 Joined: 15th Jun 2010 Ride: XD Fairmont Ghia 351 Location: Blue Mountains |
Occupational hazzard mr evil.
|
||
| Top | |
||
| philt |
|
||
|
ptoh2233 wrote: I have a 2005 ba mark ii ford and it has developed a shutter in the steering wheel at about 100kph even when you slow down still there. does anybody have a idea what it could be? Stu may be onto something with the booster. Take the master cyl off (2 bolts) then mark the end of the booster push rod with paint and slide back on and do up. Then undo it again. If the paint on the end of the rod has been marked by the Master cyinder then you may need an adjustment my man. Failing that go the Pedders for a $14 safety check they will list what it could be. |
||
| Top | |
||
| Who is online |
|---|
Users browsing this forum: No registered users and 38 guests |
