Fordmods Logo

Line-loc Install 

 

Page 1 of 1 [ 5 posts ] 

 
 Post subject: Line-loc Install
Posted: Tue Oct 18, 2011 3:19 pm 
Tyre Shredder
Offline
User avatar

Age: 30

Posts: 300

Joined: 22nd Jun 2009

Ride: 98 EL Fairmont GHIA

Location: Wellington
New Zealand

Any rwd fans on here know the ins and outs of the b & m line lock kits? just obtained one for my car and bit confused on the wiring side of it, do you just chuck a switch in and turn the switch on to disable back brakes? any help would be awesome, thanks

going to be used for skids, not staging etc

 

_________________

98 Fairmont Ghia, T5, 6 Puk Clutch, Extractors, 2.5" Exhaust System, J3 Chip, Dobi Superlows, 17's, B&M Line-Loc.

Top
 Profile  
 
 
 Post subject: Re: Line-loc Install
Posted: Tue Oct 18, 2011 3:55 pm 
Getting Side Ways
Offline
User avatar

Age: 30

Posts: 1507

Joined: 14th Aug 2009

Gallery: 12 images

Ride: BA XT V8

Location: Gosnells, Perth
WA, Australia

if its just a burnout car i wouldt bother with a kit.
just chop the back brake hoses and seal em up. job done.

 

_________________

BA XT V8. Ice Mint. 18" Speedys. XR6T LSD. Full Pacemaker twin 2 1/2inch Stainless Steel system. Custom CAI. Black XR interior with white trimming. Powerbond underdrive kit 25%.
13.65@102mph. 2800 hi-Stall.
230RWKW@5250 rpm. 625NM.

Top
 Profile  
 
 
 Post subject: Re: Line-loc Install
Posted: Tue Oct 18, 2011 4:16 pm 
Tyre Shredder
Offline
User avatar

Age: 30

Posts: 300

Joined: 22nd Jun 2009

Ride: 98 EL Fairmont GHIA

Location: Wellington
New Zealand

burnout car has permament clamps. this is for fairmont. sick of wrecking discs and pads on the back and want to go for 4th gear haha

 

_________________

98 Fairmont Ghia, T5, 6 Puk Clutch, Extractors, 2.5" Exhaust System, J3 Chip, Dobi Superlows, 17's, B&M Line-Loc.

Top
 Profile  
 
 
 Post subject: Re: Line-loc Install
Posted: Tue Oct 18, 2011 5:01 pm 
VIC Cruise Moderator
Offline
User avatar

Age: 27

Posts: 1167

Joined: 6th Jan 2009

Gallery: 12 images

Ride: ed

Location: Mooroolbark
VIC, Australia

ok ive looked into these a bit and what ive worked out there are 2 ways u can fit them.

fit them to the front so when you have your foot on the break and then hit the switch the wheels are locked and u will not move.


or fit them inline on the back and if you flick the switch while your foot is off the brake then it will turn OFF the rear breaks. and also if you have your foot on the breaks and turn it on it will be another handbreak.....


thats what ive worked out but im still yet to fit one. its on the list tho.

 

_________________

94 White ED Wagon
eaton M112 supercharger, lowered a tad, extractors, 2.5" exhaust, T5 , custom SureCam supercharger cam, 3.45 lokka, 2 piece tailshaft, poyair bags in the back, TSS front Skirt, Sprint skirts, XR wagon spoiler.
soon to get: AU diff, upc 330mm brakes, Vapor LPG injection.

Top
 Profile  
 
 
 Post subject: Re: Line-loc Install
Posted: Tue Oct 18, 2011 5:24 pm 
Tyre Shredder
Offline
User avatar

Age: 30

Posts: 300

Joined: 22nd Jun 2009

Ride: 98 EL Fairmont GHIA

Location: Wellington
New Zealand

ausedwagon wrote:
ok ive looked into these a bit and what ive worked out there are 2 ways u can fit them.

fit them to the front so when you have your foot on the break and then hit the switch the wheels are locked and u will not move.


or fit them inline on the back and if you flick the switch while your foot is off the brake then it will turn OFF the rear breaks. and also if you have your foot on the breaks and turn it on it will be another handbreak.....


thats what ive worked out but im still yet to fit one. its on the list tho.


this is what i have figured out in my head, was just making sure i was not loosing the plot lol. so that sounds like the go, will be on the back. and the handbrake thing sounds good too would be handy in some ways. cheers for that mate

 

_________________

98 Fairmont Ghia, T5, 6 Puk Clutch, Extractors, 2.5" Exhaust System, J3 Chip, Dobi Superlows, 17's, B&M Line-Loc.

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 5 posts ] 

Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Sat Dec 16, 2017 9:26 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names