Fordmods Logo

LTD Tany HELP HELP HELP and HELP PLS 

 

Page 1 of 1 [ 7 posts ] 

 
 Post subject: LTD Tany HELP HELP HELP and HELP PLS
Posted: Mon Jan 22, 2007 3:14 pm 
Parts Gopher
Offline
User avatar

Posts: 67

Joined: 5th Jan 2007

Gallery: 2 images

Location: wagga wagga
NSW, Australia

I was just wondering can i replace my 1990 LTD v8 4 speed auto trany with a 4 speed 6 cylinder from and EA AB or ED.

Last edited by hades on Mon Jan 22, 2007 10:49 pm, edited 1 time in total.

Top
 Profile  
 
 
 Post subject: No help
Posted: Mon Jan 22, 2007 9:16 pm 
Parts Gopher
Offline
User avatar

Posts: 67

Joined: 5th Jan 2007

Gallery: 2 images

Location: wagga wagga
NSW, Australia

Can anyone help me or is it just noone knows.
Top
 Profile  
 
 
Posted: Tue Jan 23, 2007 3:04 am 
Oompa Loompa
Offline

Age: 63

Posts: 49

Joined: 29th Dec 2006

Location: Melbourne
VIC, Australia

You would probably get away with the slight differences inside the valvebody of the transmission, but the rear mounting position of the six is different to the V8. And you can't simply swap ext. housings as the v8 and 6 have different output shafts. They could be the same length (I am positive there not) but the speedo is in a different position. Also if you are using a ED transmission make sure the bell housing mates up to the box properly. EA has 4 bolts holding the housing to the box and later ones have 9, on the 6's if you put a 4 bolt housing on a 9 bolt box and do them up with a Impact gun you will most likely crack the main case causing major oil leaks, so I suppose the 8's will have the same problems. This can be fixed with a few mods. (grinding). :lol: You may have to check front pumps (or convertors)on both boxes as there are different pumps and convertor neck lengths between the EA/B and some later boxes (I think you will find a ED trans. has a different thickness set of pump gears so there is a different convetor to suit it) :oops:
Top
 Profile  
 
 
Posted: Tue Jan 23, 2007 9:51 am 
Parts Gopher
Offline
User avatar

Posts: 67

Joined: 5th Jan 2007

Gallery: 2 images

Location: wagga wagga
NSW, Australia

Sorry corection its a 1992 not 90
Top
 Profile  
 
 
Posted: Tue Jan 23, 2007 9:50 pm 
Getting Side Ways
Offline
User avatar

Age: 49

Posts: 6467

Joined: 18th Dec 2006

Ride: 93 ED sedan

Power: 161 rwkw

Location: Rockhampton
QLD, Australia

I don't think you can swap it for a 6cyl one. They are a different model designation.

 

_________________

http://youtu.be/jJTh9F3Vgg0

Top
 Profile  
 
 
 Post subject: All fixed thanks
Posted: Mon Apr 09, 2007 9:05 pm 
Parts Gopher
Offline
User avatar

Posts: 67

Joined: 5th Jan 2007

Gallery: 2 images

Location: wagga wagga
NSW, Australia

All fixed cost me $500 for rebuild.
Top
 Profile  
 
 
Posted: Mon Apr 09, 2007 9:19 pm 
Getting Side Ways
Offline
User avatar

Posts: 3363

Joined: 27th Dec 2004

Gallery: 4 images

Ride: MCMXCV Falcon

Location: G town
VIC, Australia

cheapest rebuild of all time!

 

_________________

Image

Top
 Profile  
 
Display posts from previous:
Sort by  
 Page 1 of 1  [ 7 posts ] 

Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

 

 

It is currently Tue Dec 12, 2017 4:08 am All times are UTC + 11 hours

 

 

(c)2014 Total Web Solutions Australia - Australian Web Hosting and Domain Names